Thanks. Since there is already a Perc3 SCSI adapter installed would the new entry in /etc/module.conf conflict with it? <snip> probeall scsi_hostadapter megaraid <snip> By the way, didn't know that only RH users could use this list; especially since Mandrake is based on the RedHat distro. Regardless, I use both distros and subscribe to many of the valuable Linux lists out there. Nor do I want to start a flame war either, but this list tends to have solid, practical answers. Therefore, here I am. Thanks again, James -----Original Message----- From: Jason Dixon [mailto:jason@xxxxxxxxxxxxxx] Sent: Saturday, May 22, 2004 2:46 PM To: General Red Hat Linux discussion list Subject: Re: How to force kudzu to look for hardware changes at boot up On May 22, 2004, at 5:19 PM, James D. Parra wrote: > Hello, > > Added a SCSI card to our server and I'd like Kudzu to add the card and > detect the tape drive that is connected to it during boot up. > > The tape drive is detected by the SCSI controller at boot up (on the > right > channel), but it doesn't appear as a device in harddrake. > > I don't mind setting it manually, if need be. Add the following to your /etc/modules.conf: alias scsi_hostadapter advansys P.S. This is a Red Hat list, not a Mandrake list. -- Jason Dixon, RHCE DixonGroup Consulting http://www.dixongroup.net -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
