Re: new to list / network eth0 issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Title: RE: new to list / network eth0 issue
Post lan ip range and leave ip address for eth0 if you want to get help
----- Original Message -----
Sent: Monday, May 03, 2004 9:05 PM
Subject: RE: new to list / network eth0 issue

--howdy:

[snip ifconfig -a]

eth0      Link encap:Ethernet  HWaddr 00:B0:D0:FC:19:7A
          inet addr:xx.xx.xx  Bcast:xx.xx.xx.255  Mask:255.255.254.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:69145386 errors:0 dropped:0 overruns:0 frame:0
          TX packets:49575308 errors:0 dropped:0 overruns:0 carrier:0
          collisions:81 txqueuelen:1000
          RX bytes:1702865863 (1623.9 Mb)  TX bytes:3221088258 (3071.8 Mb)
          Interrupt:11 Base address:0xecc0 Memory:fe123000-fe123038

eth1      Link encap:Ethernet  HWaddr 00:02:B3:95:E1:79
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:10 Base address:0xec80 Memory:fe122000-fe122038

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:616649 errors:0 dropped:0 overruns:0 frame:0
          TX packets:616649 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:65411009 (62.3 Mb)  TX bytes:65411009 (62.3 Mb)

[/snip ifconfig -a]

* * * * *

[snip ethtool]
Settings for eth0:
   Supported ports: [ TP MII ]
   Supported link modes:   10baseT/Half 10baseT/Full
                           100baseT/Half 100baseT/Full
   Supports auto-negotiation: Yes
   Advertised link modes:  10baseT/Half 10baseT/Full
                           100baseT/Half 100baseT/Full
   Advertised auto-negotiation: No
   Speed: 100Mb/s
   Duplex: Full
   Port: Twisted Pair
   PHYAD: 1
   Transceiver: internal
   Auto-negotiation: off
   Supports Wake-on: puag
   Wake-on: g
   Link detected: yes

[/snip ethtool]

--is there something that i should know between
--this machine and the network?  it doesn't seem
--(to me) that the servers should talk to everyone
--else but to each other (RHEL 3.0 / Windows 2000)

--thanks!

-X
-----Original Message-----
From: Crucificator [mailto:crucificator@xxxxxxx]

sorry, make that ifconfig -a


--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list



-------------------------------------------------------
Connex scaneaza automat toate mesajele impotriva virusilor folosind RAV AntiVirus.
Connex automatically scans all messages for viruses using RAV AntiVirus.

Nota: RAV AntiVirus poate sa nu detecteze toti virusii noi sau toate variantele lor.
Pentru a inlatura efectele nedorite si din dorinta de a va oferi in permanenta servicii
de cea mai buna calitate mesajele detectate ca fiind infectate vor fi sterse automat .
Va rugam sa luati in considerare ca exista un risc de fiecare data cand deschideti
fisiere atasate si ca MobiFon nu este responsabila pentru nici un prejudiciu cauzat de
virusi.

Disclaimer: RAV Antivirus may not be able to detect all new viruses and variants. In
order to remove  unwanted effects and to continuously provide quality services all
infected e-mails will be automatically deleted .Please be aware that there is a risk
involved whenever opening e-mail attachments to your computer and that MobiFon is not
responsible for any damages caused by viruses.
-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list

[Index of Archives]     [CentOS]     [Kernel Development]     [PAM]     [Fedora Users]     [Red Hat Development]     [Big List of Linux Books]     [Linux Admin]     [Gimp]     [Asterisk PBX]     [Yosemite News]     [Red Hat Crash Utility]


  Powered by Linux