--howdy:
[snip ifconfig -a]
eth0 Link encap:Ethernet HWaddr 00:B0:D0:FC:19:7A
inet addr:xx.xx.xx Bcast:xx.xx.xx.255 Mask:255.255.254.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:69145386 errors:0 dropped:0 overruns:0 frame:0
TX packets:49575308 errors:0 dropped:0 overruns:0 carrier:0
collisions:81 txqueuelen:1000
RX bytes:1702865863 (1623.9 Mb) TX bytes:3221088258 (3071.8 Mb)
Interrupt:11 Base address:0xecc0 Memory:fe123000-fe123038
eth1 Link encap:Ethernet HWaddr 00:02:B3:95:E1:79
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:10 Base address:0xec80 Memory:fe122000-fe122038
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:616649 errors:0 dropped:0 overruns:0 frame:0
TX packets:616649 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:65411009 (62.3 Mb) TX bytes:65411009 (62.3 Mb)
[/snip ifconfig -a]
* * * * *
[snip ethtool]
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: No
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: off
Supports Wake-on: puag
Wake-on: g
Link detected: yes
[/snip ethtool]
--is there something that i should know between
--this machine and the network? it doesn't seem
--(to me) that the servers should talk to everyone
--else but to each other (RHEL 3.0 / Windows 2000)
--thanks!
-X
-----Original Message-----
From: Crucificator [mailto:crucificator@xxxxxxx]
sorry, make that ifconfig -a
-- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
