Hi folks,
I've got the above device which I've connected to my box. However, I can't
mount it. I think the USB side is working fine, because running usbview
shows the device, and the relevent modules are loaded. Below are the outputs
from the lsmod, and a cat of the /proc/ devices file.
However, when I try to mount the device, using
mount -t msdos /dev/sda1 /mnt/floppy
I get the bad fs or superblock error message. If I use a different device
number it makes no difference.
Anyone got any ideas?
[root@dcomp2 usb]# lsmod |grep usb
usb-storage 67968 0
scsi_mod 106956 2 [sd_mod usb-storage]
usb-uhci 24612 0 (unused)
usbcore 73792 1 [usb-storage usb-uhci]
[root@dcomp2 usb]# mount -t msdos /dev/sda1 /mnt/floppy/
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
or too many mounted file systems
[root@dcomp2 usb]# cat devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 11/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 1
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04bb ProdID=2515 Rev= 0.01
S: Manufacturer=Freecom Technologies
S: Product=USB Embedded Hub
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=12ms
T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04bb ProdID=0c01 Rev= 0.01
S: Manufacturer=Freecom Technologies
S: Product=USB Mass Storage Device
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
[root@dcomp2 usb]#
--
Gary Stainburn
This email does not contain private or confidential material as it
may be snooped on by interested government parties for unknown
and undisclosed purposes - Regulation of Investigatory Powers Act, 2000
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
