http://www.opengroupware.org/ James Williams Network Systems Engineer -----Original Message----- From: redhat-list-admin@xxxxxxxxxx [mailto:redhat-list-admin@xxxxxxxxxx] On Behalf Of Mike Koponick Sent: Thursday, October 16, 2003 9:36 AM To: redhat-list@xxxxxxxxxx Subject: Alternative for Exchange Hello, I'm sure this has been talked about previously, but I was looking for an alternative to MicroSoft Exchange. I've seen a few options on the web, but thy have a $$$$ amount to them that's out of the range of my budget. I searched on Freshmeat without much luck. Any suggestions? Thanks! Mike ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify security@xxxxxxxxxxxxx ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: Brett Franck [mailto:bfranck@xxxxxxxxxxxxxxxxx] Sent: Wednesday, October 15, 2003 10:28 PM To: redhat-list@xxxxxxxxxx Subject: Re: SNMP + MRTG... WTF? From: "Rodolfo J. Paiz" <rpaiz@xxxxxxxxxxxxxx> To: <redhat-list@xxxxxxxxxx> Sent: Wednesday, October 15, 2003 8:13 PM Subject: RE: SNMP + MRTG... WTF? > First off, it WORKED! Thanks to Brett and Steve for the key pieces of help. > Of course, some further questions on the subject for resolution: > > At 05:23 10/15/2003, you wrote: > >You might consider running a less restrictive snmpd until you get things > >figured out, try changing the sec.model section to any. i.e. > > > >group MyRWGroup any local > >group MyROGroup any mynetwork > > > >Now you can make a v1 or v2c type query. > > Based on the error messages (many hundreds of them) which I got from MRTG > in the course of testing, it seems like MRTG uses v1 queries. Nevertheless, > I set this to "any" as you suggested, which is fine except for two errors > in /var/log/messages when snmpd is restarted. Those errors say: > > Oct 13 21:11:26 apollo ucd-snmp[22520]: /etc/snmp/snmpd.conf: line 76: > Error: bad security model "any" should be: v1, v2c or usm - installing anyway > Oct 13 21:11:26 apollo ucd-snmp[22520]: /etc/snmp/snmpd.conf: line 77: > Error: bad security model "any" should be: v1, v2c or usm - installing anyway > > What should I do here to correct this error and make it go away? > > Also, three more questions, now directly related to the MRTG output: > > 1. "The statistics were last updated... blah, blah... at which > time 'apollo.paiz.org' had been up for 2:01:10." The actual uptime is > around 12 days... where is snmpd/mrtg getting its data, and how can I make > sure that it gets the correct data? This is because the SNMPD module has been up and running for 2:01:10....snmpd restart will show "System Uptime" of 0:00:01 not the "timeticks" of the server itself. > > 2. I have a screen resolution of 1400x1050 on my notebook, and > 1280x1024 on my desktop. The charts seem to be optimized for 640x480 or > something... they look tiny. Can I either make them larger, or maybe put > two interface charts side by side? (This box only has two interfaces, so > being able to see both at once would be nice too.) Can't Help Yah Here. > > 3. I have a 256 Kbps link... should I set MaxBytes to exactly > 32000 or 32768? I know it's for display only, but what is the _correct_ value? > 256Kbps = 32KB See http://www.perfectnetusa.com/kilo.htm > Thanks again for all the help, guys. > > > -- > Rodolfo J. Paiz > rpaiz@xxxxxxxxxxxxxx > > > -- > redhat-list mailing list > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/redhat-list > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list
