On Wed, Jul 26, 2023 at 9:20 AM Kaushal Shriyan <kaushalshriyan@xxxxxxxxx> wrote: > > > On Tue, Jul 25, 2023 at 12:04 AM Mike Burger <mburger@xxxxxxxxxxxxxxxxx> > wrote: > >> On 2023-07-24 14:21, Kaushal Shriyan wrote: >> > Hi, >> > >> > I am trying to build >> > >> https://www.openldap.org/software/download/OpenLDAP/openldap-release/openldap-2.5.15.tgz >> > on Red Hat Enterprise Linux release 8.7 (Ootpa)# >> > >> > Is there a way to configure openldap on /etc directory for >> > configuration >> > files and generate systemctl openldap service unit file to start , stop >> > and >> > restart openldap service? >> > >> > >> ################################################################################################################################################ >> > ./configure --help >> > `configure' configures this package to adapt to many kinds of systems. >> > >> > Usage: ./configure [OPTION]... [VAR=VALUE]... >> > >> > To assign environment variables (e.g., CC, CFLAGS...), specify them as >> > VAR=VALUE. See below for descriptions of some of the useful variables. >> > >> > Defaults for the options are specified in brackets. >> > >> > Configuration: >> > -h, --help display this help and exit >> > --help=short display options specific to this package >> > --help=recursive display the short help of all the included >> > packages >> > -V, --version display version information and exit >> > -q, --quiet, --silent do not print `checking ...' messages >> > --cache-file=FILE cache test results in FILE [disabled] >> > -C, --config-cache alias for `--cache-file=config.cache' >> > -n, --no-create do not create output files >> > --srcdir=DIR find the sources in DIR [configure dir or >> > `..'] >> > >> > Installation directories: >> > --prefix=PREFIX install architecture-independent files in >> > PREFIX >> > [/usr/local] >> > --exec-prefix=EPREFIX install architecture-dependent files in >> > EPREFIX >> > [PREFIX] >> > >> > By default, `make install' will install all the files in >> > `/usr/local/bin', `/usr/local/lib' etc. You can specify >> > an installation prefix other than `/usr/local' using `--prefix', >> > for instance `--prefix=$HOME'. >> > >> > For better control, use the options below. >> > >> > Fine tuning of the installation directories: >> > --bindir=DIR user executables [EPREFIX/bin] >> > --sbindir=DIR system admin executables [EPREFIX/sbin] >> > --libexecdir=DIR program executables [EPREFIX/libexec] >> > --sysconfdir=DIR read-only single-machine data [PREFIX/etc] >> > --sharedstatedir=DIR modifiable architecture-independent data >> > [PREFIX/com] >> > --localstatedir=DIR modifiable single-machine data [PREFIX/var] >> > --libdir=DIR object code libraries [EPREFIX/lib] >> > --includedir=DIR C header files [PREFIX/include] >> > --oldincludedir=DIR C header files for non-gcc [/usr/include] >> > --datarootdir=DIR read-only arch.-independent data root >> > [PREFIX/share] >> > --datadir=DIR read-only architecture-independent data >> > [DATAROOTDIR] >> > --infodir=DIR info documentation [DATAROOTDIR/info] >> > --localedir=DIR locale-dependent data [DATAROOTDIR/locale] >> > --mandir=DIR man documentation [DATAROOTDIR/man] >> > --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] >> > --htmldir=DIR html documentation [DOCDIR] >> > --dvidir=DIR dvi documentation [DOCDIR] >> > --pdfdir=DIR pdf documentation [DOCDIR] >> > --psdir=DIR ps documentation [DOCDIR] >> > >> > System types: >> > --build=BUILD configure for building on BUILD [guessed] >> > --host=HOST cross-compile to build programs to run on HOST >> > [BUILD] >> > --target=TARGET configure for building compilers for TARGET [HOST] >> > >> > Optional Features: >> > --disable-option-checking ignore unrecognized --enable/--with >> > options >> > --disable-FEATURE do not include FEATURE (same as >> > --enable-FEATURE=no) >> > --enable-FEATURE[=ARG] include FEATURE [ARG=yes] >> > --enable-debug enable debugging no|yes|traditional [yes] >> > --enable-dynamic enable linking built binaries with dynamic >> > libs >> > [auto] >> > --enable-syslog enable syslog support [auto] >> > --enable-ipv6 enable IPv6 support [auto] >> > --enable-local enable AF_LOCAL (AF_UNIX) socket support >> > [auto] >> > >> > SLAPD (Standalone LDAP Daemon) Options: >> > --enable-slapd enable building slapd [yes] >> > --enable-dynacl enable run-time loadable ACL support >> > (experimental) [no] >> > --enable-aci enable per-object ACIs (experimental) >> > no|yes|mod >> > [no] >> > --enable-cleartext enable cleartext passwords [yes] >> > --enable-crypt enable crypt(3) passwords [no] >> > --enable-spasswd enable (Cyrus) SASL password verification >> > [no] >> > --enable-modules enable dynamic module support [no] >> > --enable-rlookups enable reverse lookups of client hostnames >> > [no] >> > --enable-slapi enable SLAPI support (experimental) [no] >> > --enable-slp enable SLPv2 support [no] >> > --enable-wrappers enable tcp wrapper support [no] >> > >> > SLAPD Backend Options: >> > --enable-backends enable all available backends no|yes|mod >> > --enable-dnssrv enable dnssrv backend no|yes|mod [no] >> > --enable-ldap enable ldap backend no|yes|mod [no] >> > --enable-mdb enable mdb database backend no|yes|mod [yes] >> > --enable-meta enable metadirectory backend no|yes|mod [no] >> > --enable-asyncmeta enable asynchronous metadirectory backend >> > no|yes|mod [no] >> > --enable-null enable null backend no|yes|mod [no] >> > --enable-passwd enable passwd backend no|yes|mod [no] >> > --enable-perl enable perl backend no|yes|mod [no] >> > --enable-relay enable relay backend no|yes|mod [yes] >> > --enable-sock enable sock backend no|yes|mod [no] >> > --enable-sql enable sql backend no|yes|mod [no] >> > --enable-wt enable WiredTiger backend no|yes|mod [no] >> > >> > SLAPD Overlay Options: >> > --enable-overlays enable all available overlays no|yes|mod >> > --enable-accesslog In-Directory Access Logging overlay >> > no|yes|mod >> > [no] >> > --enable-auditlog Audit Logging overlay no|yes|mod [no] >> > --enable-autoca Automatic Certificate Authority overlay >> > no|yes|mod [no] >> > --enable-collect Collect overlay no|yes|mod [no] >> > --enable-constraint Attribute Constraint overlay no|yes|mod [no] >> > --enable-dds Dynamic Directory Services overlay no|yes|mod >> > [no] >> > --enable-deref Dereference overlay no|yes|mod [no] >> > --enable-dyngroup Dynamic Group overlay no|yes|mod [no] >> > --enable-dynlist Dynamic List overlay no|yes|mod [no] >> > --enable-homedir Home Directory Management overlay no|yes|mod >> > [no] >> > --enable-memberof Reverse Group Membership overlay no|yes|mod >> > [no] >> > --enable-otp OTP 2-factor authentication overlay >> > no|yes|mod >> > [no] >> > --enable-ppolicy Password Policy overlay no|yes|mod [no] >> > --enable-proxycache Proxy Cache overlay no|yes|mod [no] >> > --enable-refint Referential Integrity overlay no|yes|mod [no] >> > --enable-remoteauth Deferred Authentication overlay no|yes|mod >> > [no] >> > --enable-retcode Return Code testing overlay no|yes|mod [no] >> > --enable-rwm Rewrite/Remap overlay no|yes|mod [no] >> > --enable-seqmod Sequential Modify overlay no|yes|mod [no] >> > --enable-sssvlv ServerSideSort/VLV overlay no|yes|mod [no] >> > --enable-syncprov Syncrepl Provider overlay no|yes|mod [yes] >> > --enable-translucent Translucent Proxy overlay no|yes|mod [no] >> > --enable-unique Attribute Uniqueness overlay no|yes|mod [no] >> > --enable-valsort Value Sorting overlay no|yes|mod [no] >> > >> > SLAPD Password Module Options: >> > --enable-argon2 Argon2 password hashing module no|yes [no] >> > >> > LLOADD (Load Balancer Daemon) Options: >> > --enable-balancer enable load balancer no|yes|mod [no] >> > >> > Library Generation & Linking Options >> > --enable-static[=PKGS] build static libraries [default=yes] >> > --enable-shared[=PKGS] build shared libraries [default=yes] >> > --enable-versioning Enable versioned symbols in shared library >> > no|yes|auto [auto] >> > --enable-fast-install[=PKGS] >> > optimize for fast installation [default=yes] >> > --disable-libtool-lock avoid locking (might break parallel builds) >> > >> > Optional Packages: >> > --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] >> > --without-PACKAGE do not use PACKAGE (same as >> > --with-PACKAGE=no) >> > --with-subdir=DIR change default subdirectory used for installs >> > --with-cyrus-sasl with Cyrus SASL support [auto] >> > --with-systemd with systemd service notification support >> > [auto] >> > --with-fetch with fetch(3) URL support [auto] >> > --with-threads with threads library >> > auto|nt|posix|pth|lwp|manual >> > [auto] >> > --with-tls with TLS/SSL support auto|openssl|gnutls >> > [auto] >> > --with-yielding-select with implicitly yielding select [auto] >> > --with-mp with multiple precision statistics >> > auto|longlong|long|bignum|gmp [auto] >> > --with-odbc with specific ODBC support >> > iodbc|unixodbc|odbc32|auto [auto] >> > --with-argon2 with argon2 support library >> > auto|libsodium|libargon2 [auto] >> > --with-pic[=PKGS] try to use only PIC/non-PIC objects >> > [default=use >> > both] >> > --with-aix-soname=aix|svr4|both >> > shared library versioning (aka "SONAME") >> > variant >> > to >> > provide on AIX, [default=aix]. >> > --with-gnu-ld assume the C compiler uses GNU ld >> > [default=no] >> > --with-sysroot[=DIR] Search for dependent libraries within DIR (or >> > the >> > compiler's sysroot if not specified). >> > >> > See INSTALL file for further details. >> > >> > Some influential environment variables: >> > CC C compiler command >> > CFLAGS C compiler flags >> > LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a >> > nonstandard directory <lib dir> >> > LIBS libraries to pass to the linker, e.g. -l<library> >> > CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include >> > dir> if >> > you have headers in a nonstandard directory <include dir> >> > LT_SYS_LIBRARY_PATH >> > User-defined run-time library search path. >> > CPP C preprocessor >> > PKG_CONFIG path to pkg-config utility >> > PKG_CONFIG_PATH >> > directories to add to pkg-config's search path >> > PKG_CONFIG_LIBDIR >> > path overriding pkg-config's built-in search path >> > WT_CFLAGS C compiler flags for WT, overriding pkg-config >> > WT_LIBS linker flags for WT, overriding pkg-config >> > systemdsystemunitdir >> > value of systemdsystemunitdir for systemd, overriding >> > pkg-config >> > >> > Use these variables to override the choices made by `configure' or to >> > help >> > it to find libraries and programs with nonstandard names/locations. >> > >> > Report bugs to the package provider. >> > >> ################################################################################################################################################ >> > >> > Please guide me. Thanks in advance. >> >> Out of curiosity, is there a specific reason you're building from >> source, rather than installing the prebuild openldap RPM package that is >> available for YUM/DNF installation from Red Hat's >> rhel-8-for-x86_64-baseos-rpms repository? >> -- >> https://poplme.co/hash/lqQkxj0F/1/es >> >> "It's always suicide-mission this, save-the-planet that. No one ever >> just >> stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1 >> >> -- >> redhat-list mailing list >> unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe >> https://listman.redhat.com/mailman/listinfo/redhat-list >> >> > > Hi Mike, > > Apologies for the late reply. Thanks a lot for the email response. > > # cat /etc/redhat-release > Red Hat Enterprise Linux release 8.7 (Ootpa) > #yum repolist enabledUpdating Subscription Management repositories. > repo id > repo name > epel > Extra Packages for Enterprise Linux 8 - x86_64 > nginx-stable > nginx stable repo > nodesource > Node.js Packages for Enterprise Linux 8 - x86_64 > rhel-8-for-x86_64-appstream-rpms > Red Hat Enterprise Linux 8 for x86_64 - AppStream (RPMs) > rhel-8-for-x86_64-baseos-rpms > Red Hat Enterprise Linux 8 for x86_64 - BaseOS (RPMs) > # yum search openldap > Updating Subscription Management repositories. > Last metadata expiration check: 3:52:35 ago on Wed 26 Jul 2023 05:22:54 AM > IST. > ====================================================================================== > Name Exactly Matched: openldap > ====================================================================================== > openldap.x86_64 : LDAP support libraries > openldap.i686 : LDAP support libraries > ===================================================================================== > Name & Summary Matched: openldap > ===================================================================================== > collectd-openldap.x86_64 : OpenLDAP plugin for collectd > ========================================================================================== > Name Matched: openldap > ========================================================================================== > openldap-clients.x86_64 : LDAP client utilities > openldap-devel.i686 : LDAP development libraries and header files > openldap-devel.x86_64 : LDAP development libraries and header files > ======================================================================================== > Summary Matched: openldap > ========================================================================================= > lua-ldap.x86_64 : LDAP client library for Lua, using OpenLDAP > lua-ldap-compat.x86_64 : LDAP client library for Lua 5.1, using OpenLDAP > perl-Mozilla-LDAP.x86_64 : LDAP Perl module that wraps the OpenLDAP C SDK > # > > I do not see *openldap-servers.x86_64 : LDAP server* as per the above > output. Am I missing anything? Please guide me. Thanks in advance. > > Best Regards, > > Kaushal > > Hi Mike, I just saw this https://access.redhat.com/solutions/3816971 link. Looks like it is not available now on Red Hat Enterprise Linux release 8.7 (Ootpa) Best Regards, Kaushal -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
