On 10/16/13 14:10, Doll, Margaret Ann wrote:
Sorry. I moving between buildings. Below is the data.
df
/dev/mapper/VolGroup00-LogVol00 34% /
tmpfs 0% /dev.shm
/dev/sda3 45% /boot
/dev/sda5 92% /home
/dev/sdb1 1% /tycho-1
/dev/sde1 37% /raid
I had to mount everything except / by hand
service network start
Bringing up loopback interface:
Bringing up interface eth0:
Determining IP information for eth0...Can't create
/var/run/chclient-eth0.pid:
Read-only file system.
...
fdisk /dev/sda
p
/dev/sda1 1 5 40131 de Dell Utility
/dev/sda2 6 789 6290480 c W95 FAT32 (LBA)
/dev/sda3 790 815 204800 83 Linux
Parition 3 does not end on cylinder boundary.
/dev/sda4 815 121602 970218496 5 Extended
/dev/sda5 815 1337 4194304 83 Linux
/dev/sda6 1338 121602 966022144 8e Linux LVM
mount /dev/sda6 /tmp
mount: unknown filessystem type 'LVM2_member'
Ok, the rescue doesn't seem to understand LVM2.
fstab
/dev/mapper/VolGroup-LogVol100 / ext4
UUID=f1fa....466 /boot ext4
UUID=13a6e...eb5 /home ext4
/dev/mapper/VolGroup00-LogVol101 swap swap
tmpfs
devpts
sysfs
proc
/dev/sdb1 /tycho-1 ext4
/dev/sdd1 /raid ext4
Ahhhh.... when you boot via rescue, or if you've brought it up manually,
check the UUID of the drives. If they've changed, both /etc/fstab *AND*
/boot/grub/grub.conf need to be changed.
Or you can use e2label to label the filesystem, and then change /etc/fstab to
LABEL=/boot /boot...
etc.
mark
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list
