Re: [regression] Bug 217074 - upgrading to kernel 6.1.12 from 5.15.x can no longer assemble software raid0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 04 Mar 2023, Song Liu wrote:
> + Jes.
> 
> It appeared to me that we can assemble the array if we have any of the
> following:
> 1. Enable CONFIG_BLOCK_LEGACY_AUTOLOAD;
> 2. Have a valid /etc/mdadm.conf;
> 3. Update mdadm to handle this case. (I tried some ugly hacks, which worked but
>     weren't clean).
> 
> Since we eventually would like to get rid of CONFIG_BLOCK_LEGACY_AUTOLOAD, I
> think we need mdadm to handle this properly. But the logistics might
> be complicated, as
> mdadm are shipped separately.
> 
> Jes, what do you think about this? AFAICT, we need to update the logic in
> mdopen.c:create_mddev().

mdadm already handles this, but only if 
   CREATE names=yes
is present in /etc/mdadm.conf

Maybe we should flip the default for the next mdadm release, and patch
the kernel (with a stable backport) to select BLOCK_LEGACY_AUTOLOAD if
BLK_DEV_MD=m 
Then revert that - say - 6 months after the new mdadm is released.

NeilBrown


> 
> Thanks,
> Song
> 
> 
> On Thu, Feb 23, 2023 at 8:06 AM Linux regression tracking (Thorsten
> Leemhuis) <regressions@xxxxxxxxxxxxx> wrote:
> >
> > Hi, this is your Linux kernel regression tracker.
> >
> > I noticed a regression report in bugzilla.kernel.org. As many (most?)
> > kernel developer don't keep an eye on it, I decided to forward it by
> > mail. Quoting from https://bugzilla.kernel.org/show_bug.cgi?id=217074 :
> >
> > > Hello,
> > > Installing a new kernel 6.1.12 does not allow assembly of raid0 device.
> > >
> > > Going back to previous working kernels: 5.15.65, 5.15.75 assembles the raid0 without any problems.
> > >
> > > Kernel command line parameters:
> > > ... ro kvm_amd.nested=0 kvm_amd.avic=1 kvm_amd.npt=1 raid0.default_layout=2
> > >
> > > mdadm assembly attempt fails with:
> > > 'mdadm: unexpected failure opening /dev/md<NR>'
> > >
> > > Tried with mdadm-4.1 and mdadm-4.2, but as it works with either versions of mdadm, I rule out the mdadm software.
> > >
> > > strace -f output, last few lines:
> > >
> > > mkdir("/run/mdadm", 0755)               = -1 EEXIST (File exists)
> > > openat(AT_FDCWD, "/run/mdadm/map.lock", O_RDWR|O_CREAT|O_TRUNC, 0600) = 3
> > > fcntl(3, F_GETFL)                       = 0x8002 (flags O_RDWR|O_LARGEFILE)
> > > flock(3, LOCK_EX)                       = 0
> > > newfstatat(3, "", {st_mode=S_IFREG|0600, st_size=0, ...}, AT_EMPTY_PATH) = 0
> > > openat(AT_FDCWD, "/run/mdadm/map", O_RDONLY) = 4
> > > fcntl(4, F_GETFL)                       = 0x8000 (flags O_RDONLY|O_LARGEFILE)
> > > newfstatat(4, "", {st_mode=S_IFREG|0600, st_size=0, ...}, AT_EMPTY_PATH) = 0
> > > read(4, "", 4096)                       = 0
> > > close(4)                                = 0
> > > openat(AT_FDCWD, "/run/mdadm/map", O_RDONLY) = 4
> > > fcntl(4, F_GETFL)                       = 0x8000 (flags O_RDONLY|O_LARGEFILE)
> > > newfstatat(4, "", {st_mode=S_IFREG|0600, st_size=0, ...}, AT_EMPTY_PATH) = 0
> > > read(4, "", 4096)                       = 0
> > > close(4)                                = 0
> > > newfstatat(AT_FDCWD, "/dev/.udev", 0x7ffcd8243c90, 0) = -1 ENOENT (No such file or directory)
> > > newfstatat(AT_FDCWD, "/run/udev", {st_mode=S_IFDIR|0755, st_size=160, ...}, 0) = 0
> > > openat(AT_FDCWD, "/proc/mdstat", O_RDONLY) = 4
> > > fcntl(4, F_SETFD, FD_CLOEXEC)           = 0
> > > newfstatat(4, "", {st_mode=S_IFREG|0444, st_size=0, ...}, AT_EMPTY_PATH) = 0
> > > read(4, "Personalities : [raid1] [raid0] "..., 1024) = 56
> > > read(4, "", 1024)                       = 0
> > > close(4)                                = 0
> > > openat(AT_FDCWD, "/sys/block/md127/dev", O_RDONLY) = -1 ENOENT (No such file or directory)
> > > getpid()                                = 18351
> > > mknodat(AT_FDCWD, "/dev/.tmp.md.18351:9:127", S_IFBLK|0600, makedev(0x9, 0x7f)) = 0
> > > openat(AT_FDCWD, "/dev/.tmp.md.18351:9:127", O_RDWR|O_EXCL|O_DIRECT) = -1 ENXIO (No such device or address)
> > > unlink("/dev/.tmp.md.18351:9:127")      = 0
> > > getpid()                                = 18351
> > > mknodat(AT_FDCWD, "/tmp/.tmp.md.18351:9:127", S_IFBLK|0600, makedev(0x9, 0x7f)) = 0
> > > openat(AT_FDCWD, "/tmp/.tmp.md.18351:9:127", O_RDWR|O_EXCL|O_DIRECT) = -1 ENXIO (No such device or address)
> > > unlink("/tmp/.tmp.md.18351:9:127")      = 0
> > > write(2, "mdadm: unexpected failure openin"..., 45mdadm: unexpected failure opening /dev/md127
> > > ) = 45
> > > unlink("/run/mdadm/map.lock")           = 0
> > > close(3)                                = 0
> > > exit_group(1)                           = ?
> > > +++ exited with 1 +++
> > >
> > >
> > > Tried with kernel compiled with either CONFIG_DEVTMPFS_SAFE=y or CONFIG_DEVTMPFS_SAFE=n, fails the same way.
> > >
> > > The raid consists of 4 devices, here is mdstat contents:
> > >
> > > Personalities : [raid0]
> > > md127 : active raid0 sda[0] sdc[2] sdd[3] sdb[1]
> > >       2929769472 blocks super 1.2 512k chunks
> > >
> > > unused devices: <none>
> > >
> > >
> > > Examining the 4 block devices:
> > >
> > > gnusystem /var/log # mdadm --misc -E /dev/sda
> > > /dev/sda:
> > >           Magic : a92b4efc
> > >         Version : 1.2
> > >     Feature Map : 0x0
> > >      Array UUID : bb710ce6:edd5d68d:a0a0a405:edd99547
> > >            Name : gnusystem:md0-store  (local to host gnusystem)
> > >   Creation Time : Wed Sep 29 22:28:09 2021
> > >      Raid Level : raid0
> > >    Raid Devices : 4
> > >
> > >  Avail Dev Size : 976508976 sectors (465.64 GiB 499.97 GB)
> > >     Data Offset : 264192 sectors
> > >    Super Offset : 8 sectors
> > >    Unused Space : before=264112 sectors, after=0 sectors
> > >           State : clean
> > >     Device UUID : 7f226c1c:23632b9d:e3d6c656:74522906
> > >
> > >     Update Time : Wed Sep 29 22:28:09 2021
> > >   Bad Block Log : 512 entries available at offset 8 sectors
> > >        Checksum : 51e99fb5 - correct
> > >          Events : 0
> > >
> > >      Chunk Size : 512K
> > >
> > >    Device Role : Active device 0
> > >    Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
> > > gnusystem /var/log # mdadm --misc -E /dev/sdb
> > > /dev/sdb:
> > >           Magic : a92b4efc
> > >         Version : 1.2
> > >     Feature Map : 0x0
> > >      Array UUID : bb710ce6:edd5d68d:a0a0a405:edd99547
> > >            Name : gnusystem:md0-store  (local to host gnusystem)
> > >   Creation Time : Wed Sep 29 22:28:09 2021
> > >      Raid Level : raid0
> > >    Raid Devices : 4
> > >
> > >  Avail Dev Size : 1953260976 sectors (931.39 GiB 1000.07 GB)
> > >     Data Offset : 264192 sectors
> > >    Super Offset : 8 sectors
> > >    Unused Space : before=264112 sectors, after=0 sectors
> > >           State : clean
> > >     Device UUID : ed8795fe:c7e6719a:165db37e:32ec0894
> > >
> > >     Update Time : Wed Sep 29 22:28:09 2021
> > >   Bad Block Log : 512 entries available at offset 8 sectors
> > >        Checksum : 215db63b - correct
> > >          Events : 0
> > >
> > >      Chunk Size : 512K
> > >
> > >    Device Role : Active device 1
> > >    Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
> > > gnusystem /var/log # mdadm --misc -E /dev/sdc
> > > /dev/sdc:
> > >           Magic : a92b4efc
> > >         Version : 1.2
> > >     Feature Map : 0x0
> > >      Array UUID : bb710ce6:edd5d68d:a0a0a405:edd99547
> > >            Name : gnusystem:md0-store  (local to host gnusystem)
> > >   Creation Time : Wed Sep 29 22:28:09 2021
> > >      Raid Level : raid0
> > >    Raid Devices : 4
> > >
> > >  Avail Dev Size : 976508976 sectors (465.64 GiB 499.97 GB)
> > >     Data Offset : 264192 sectors
> > >    Super Offset : 8 sectors
> > >    Unused Space : before=264112 sectors, after=0 sectors
> > >           State : clean
> > >     Device UUID : 3713dfff:d2e29aaf:3275039d:08b317bb
> > >
> > >     Update Time : Wed Sep 29 22:28:09 2021
> > >   Bad Block Log : 512 entries available at offset 8 sectors
> > >        Checksum : 42f70f03 - correct
> > >          Events : 0
> > >
> > >      Chunk Size : 512K
> > >
> > >    Device Role : Active device 2
> > >    Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
> > > gnusystem /var/log # mdadm --misc -E /dev/sdd
> > > /dev/sdd:
> > >           Magic : a92b4efc
> > >         Version : 1.2
> > >     Feature Map : 0x0
> > >      Array UUID : bb710ce6:edd5d68d:a0a0a405:edd99547
> > >            Name : gnusystem:md0-store  (local to host gnusystem)
> > >   Creation Time : Wed Sep 29 22:28:09 2021
> > >      Raid Level : raid0
> > >    Raid Devices : 4
> > >
> > >  Avail Dev Size : 1953260976 sectors (931.39 GiB 1000.07 GB)
> > >     Data Offset : 264192 sectors
> > >    Super Offset : 8 sectors
> > >    Unused Space : before=264112 sectors, after=0 sectors
> > >           State : clean
> > >     Device UUID : 7da858ae:c0d6ca51:0ecaaaf0:280367cc
> > >
> > >     Update Time : Wed Sep 29 22:28:09 2021
> > >   Bad Block Log : 512 entries available at offset 8 sectors
> > >        Checksum : 32cf4ab4 - correct
> > >          Events : 0
> > >
> > >      Chunk Size : 512K
> > >
> > >    Device Role : Active device 3
> > >    Array State : AAAA ('A' == active, '.' == missing, 'R' == replacing)
> > >
> > > If any more information is needed, let me know.
> >
> > See the ticket for details.
> >
> >
> > [TLDR for the rest of this mail: I'm adding this report to the list of
> > tracked Linux kernel regressions; the text you find below is based on a
> > few templates paragraphs you might have encountered already in similar
> > form.]
> >
> > BTW, let me use this mail to also add the report to the list of tracked
> > regressions to ensure it's doesn't fall through the cracks:
> >
> > #regzbot introduced: v5.15..v6.1.12
> > https://bugzilla.kernel.org/show_bug.cgi?id=217074
> > #regzbot title: block: md: raid0 no longer assembled
> > #regzbot ignore-activity
> >
> > This isn't a regression? This issue or a fix for it are already
> > discussed somewhere else? It was fixed already? You want to clarify when
> > the regression started to happen? Or point out I got the title or
> > something else totally wrong? Then just reply and tell me -- ideally
> > while also telling regzbot about it, as explained by the page listed in
> > the footer of this mail.
> >
> > Developers: When fixing the issue, remember to add 'Link:' tags pointing
> > to the report (e.g. the buzgzilla ticket and maybe this mail as well, if
> > this thread sees some discussion). See page linked in footer for details.
> >
> > Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
> > --
> > Everything you wanna know about Linux kernel regression tracking:
> > https://linux-regtracking.leemhuis.info/about/#tldr
> > If I did something stupid, please tell me, as explained on that page.
> 





[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux