Hi,
Overnight my server had problems with its RAID5 (xfs corrupt inodes), on reboot the raid comes up inactive.
* Smarttools suggest disks (3x2TB) are healthy. I have powered down and checked all the SATA leads are still plugged correctly.
* MDADM is unable to assembled to raid from 1 drive:
# mdadm --assemble /dev/md0 /dev/sda1 /dev/sdc1 /dev/sdd1
mdadm: /dev/md0 assembled from 1 drive - not enough to start the array.
* Event counts are well off on one drive ( 290391/182871/290391)
* SCT Error Recovery Control was disabled on all drives prior to this failure but I have since modified the boot scripts to set to 7s as per the wiki (no improvement)
I am considering whether to try --force and would like advice from experts first
Thanks in advance
INFO/LOGS
=========
lsdrv
-----
**Warning** The following utility(ies) failed to execute:
sginfo
lsusb
Some information may be missing.
PCI [ahci] 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
├scsi 2:0:0:0 ATA ST2000LM003 HN-M {S377J9CH203224}
│└sda 1.82t [8:0] Partitioned (dos)
│ └sda1 1.82t [8:1] MD (none/) (w/ sdc1,sdd1) spare 'aries:0' {3ea30608-7eb5-6154-7292-5febd0aacd1b}
│ └md0 0.00k [9:0] MD v1.2 () inactive, None (None) None {3ea30608:7eb56154:72925feb:d0aacd1b}
│ Empty/Unknown
├scsi 3:0:0:0 ATA KINGSTON SV300S3 {50026B776309F7A2}
│└sdb 111.79g [8:16] Partitioned (dos)
│ ├sdb1 500.00m [8:17] xfs {1614cf64-410a-4678-ac06-f82589c36982}
│ │└Mounted as /dev/sdb1 @ /boot
│ └sdb2 111.30g [8:18] PV LVM2_member 111.23g used, 64.00m free {8sbVtL-KkdE-NAGc-I9HB-vkRL-PUJD-pZRQDK}
│ └VG centos_aries <111.30g 64.00m free {71qn5Y-A97p-5ZXX-34OB-XatW-U2c4-DgoN15}
│ ├dm-2 53.42g [253:2] LV home xfs {cfc1ac5f-c6a6-43d4-b3c7-8f14e54f3082}
│ │└Mounted as /dev/mapper/centos_aries-home @ /home
│ ├dm-0 50.00g [253:0] LV root xfs {fc7d8004-521a-47ac-975a-33bba095d10c}
│ │└Mounted as /dev/mapper/centos_aries-root @ /
│ └dm-1 7.81g [253:1] LV swap swap {a6692126-26fe-4496-853d-05823f2d8d9e}
├scsi 4:0:0:0 ATA ST2000LM003 HN-M {S377J9EGC04604}
│└sdc 1.82t [8:32] Partitioned (dos)
│ └sdc1 1.82t [8:33] MD (none/) (w/ sda1,sdd1) spare 'aries:0' {3ea30608-7eb5-6154-7292-5febd0aacd1b}
│ └md0 0.00k [9:0] MD v1.2 () inactive, None (None) None {3ea30608:7eb56154:72925feb:d0aacd1b}
│ Empty/Unknown
└scsi 5:0:0:0 ATA ST2000LM003 HN-M {S377J9CGC02746}
└sdd 1.82t [8:48] Partitioned (dos)
└sdd1 1.82t [8:49] MD (none/) (w/ sda1,sdc1) spare 'aries:0' {3ea30608-7eb5-6154-7292-5febd0aacd1b}
└md0 0.00k [9:0] MD v1.2 () inactive, None (None) None {3ea30608:7eb56154:72925feb:d0aacd1b}
Empty/Unknown
USB [usb-storage] {50E549C2020CFE21296F8789}
└scsi 6:0:0:0 Kingston DataTraveler 2.0
└sde 7.22g [8:64] Partitioned (dos)
└sde1 7.21g [8:65] xfs {cf6b16b8-d423-4a51-9096-7f56feb70bfe}
mdadm --detail
--------------
/dev/md0:
Version : 1.2
Raid Level : raid0
Total Devices : 3
Persistence : Superblock is persistent
State : inactive
Working Devices : 3
Name : aries:0 (local to host aries)
UUID : 3ea30608:7eb56154:72925feb:d0aacd1b
Events : 290407
Number Major Minor RaidDevice
- 8 1 - /dev/sda1
- 8 33 - /dev/sdc1
- 8 49 - /dev/sdd1
mdadm examine
-------------
[root@aries scripts]# mdadm --examine /dev/sda
/dev/sda:
MBR Magic : aa55
Partition[0] : 3907027118 sectors at 2048 (type 83)
[root@aries scripts]# mdadm --examine /dev/sdc
/dev/sdc:
MBR Magic : aa55
Partition[0] : 3907027120 sectors at 2048 (type 83)
[root@aries scripts]# mdadm --examine /dev/sdd
/dev/sdd:
MBR Magic : aa55
Partition[0] : 3907027120 sectors at 2048 (type 83)
/dev/sda1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : 3ea30608:7eb56154:72925feb:d0aacd1b
Name : aries:0 (local to host aries)
Creation Time : Sun May 22 14:10:35 2016
Raid Level : raid5
Raid Devices : 3
Avail Dev Size : 3906764974 (1862.89 GiB 2000.26 GB)
Array Size : 3906764800 (3725.78 GiB 4000.53 GB)
Used Dev Size : 3906764800 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=174 sectors
State : clean
Device UUID : 9090435f:2cda0d24:beb17f3d:f8192b0d
Internal Bitmap : 8 sectors from superblock
Update Time : Thu Aug 2 07:08:12 2018
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : c4838b97 - correct
Events : 290407
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 0
Array State : A.. ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdc1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : 3ea30608:7eb56154:72925feb:d0aacd1b
Name : aries:0 (local to host aries)
Creation Time : Sun May 22 14:10:35 2016
Raid Level : raid5
Raid Devices : 3
Avail Dev Size : 3906764976 (1862.89 GiB 2000.26 GB)
Array Size : 3906764800 (3725.78 GiB 4000.53 GB)
Used Dev Size : 3906764800 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=176 sectors
State : active
Device UUID : a78aacff:e0a33538:c86bd6ed:03d6cae1
Internal Bitmap : 8 sectors from superblock
Update Time : Mon Jul 30 04:24:19 2018
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : fe0c0681 - correct
Events : 182871
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 1
Array State : AAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdd1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x1
Array UUID : 3ea30608:7eb56154:72925feb:d0aacd1b
Name : aries:0 (local to host aries)
Creation Time : Sun May 22 14:10:35 2016
Raid Level : raid5
Raid Devices : 3
Avail Dev Size : 3906764976 (1862.89 GiB 2000.26 GB)
Array Size : 3906764800 (3725.78 GiB 4000.53 GB)
Used Dev Size : 3906764800 (1862.89 GiB 2000.26 GB)
Data Offset : 262144 sectors
Super Offset : 8 sectors
Unused Space : before=262056 sectors, after=176 sectors
State : clean
Device UUID : 2859efad:60065876:10826bf5:d38849c8
Internal Bitmap : 8 sectors from superblock
Update Time : Thu Aug 2 01:15:02 2018
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : d8876cc0 - correct
Events : 290391
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 2
Array State : A.A ('A' == active, '.' == missing, 'R' == replacing)
SMARTCTL SDA
------------
[root@aries scripts]# smartctl --xall /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-862.6.3.el7.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M9T
Device Model: ST2000LM003 HN-M201RAD
Serial Number: S377J9CH203224
LU WWN Device Id: 5 0004cf 211e05aa1
Firmware Version: 2BE10001
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Aug 2 08:50:11 2018 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: (22020) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 367) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0
2 Throughput_Performance -OS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 091 091 025 - 2856
4 Start_Stop_Count -O--CK 100 100 000 - 110
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 18896
10 Spin_Retry_Count -O--CK 252 252 051 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 27
191 G-Sense_Error_Rate -O---K 252 252 000 - 0
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 055 046 000 - 45 (Min/Max 20/54)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 14
223 Load_Retry_Count -O--CK 100 100 000 - 61
225 Load_Cycle_Count -O--CK 001 001 000 - 1272917
241 Total_LBAs_Written -O--CK 100 094 000 - 1127907
242 Total_LBAs_Read -O--CK 097 094 000 - 5367764
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xc0-0xdf GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 18896 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Self_test_in_progress [90% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 45 Celsius
Power Cycle Min/Max Temperature: 36/52 Celsius
Lifetime Min/Max Temperature: 19/54 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (57)
Index Estimated Time Temperature Celsius
58 2018-08-01 22:15 45 **************************
59 2018-08-01 22:20 40 *********************
... ..( 10 skipped). .. *********************
70 2018-08-01 23:15 40 *********************
71 2018-08-01 23:20 41 **********************
... ..( 14 skipped). .. **********************
86 2018-08-02 00:35 41 **********************
87 2018-08-02 00:40 42 ***********************
... ..( 6 skipped). .. ***********************
94 2018-08-02 01:15 42 ***********************
95 2018-08-02 01:20 43 ************************
96 2018-08-02 01:25 45 **************************
97 2018-08-02 01:30 45 **************************
98 2018-08-02 01:35 45 **************************
99 2018-08-02 01:40 46 ***************************
... ..( 8 skipped). .. ***************************
108 2018-08-02 02:25 46 ***************************
109 2018-08-02 02:30 47 ****************************
... ..( 11 skipped). .. ****************************
121 2018-08-02 03:30 47 ****************************
122 2018-08-02 03:35 46 ***************************
123 2018-08-02 03:40 45 **************************
... ..( 2 skipped). .. **************************
126 2018-08-02 03:55 45 **************************
127 2018-08-02 04:00 44 *************************
0 2018-08-02 04:05 44 *************************
1 2018-08-02 04:10 47 ****************************
2 2018-08-02 04:15 46 ***************************
3 2018-08-02 04:20 47 ****************************
4 2018-08-02 04:25 48 *****************************
5 2018-08-02 04:30 47 ****************************
6 2018-08-02 04:35 49 ******************************
7 2018-08-02 04:40 47 ****************************
8 2018-08-02 04:45 48 *****************************
9 2018-08-02 04:50 49 ******************************
10 2018-08-02 04:55 47 ****************************
11 2018-08-02 05:00 48 *****************************
12 2018-08-02 05:05 45 **************************
13 2018-08-02 05:10 44 *************************
... ..( 4 skipped). .. *************************
18 2018-08-02 05:35 44 *************************
19 2018-08-02 05:40 43 ************************
20 2018-08-02 05:45 43 ************************
21 2018-08-02 05:50 42 ***********************
... ..( 17 skipped). .. ***********************
39 2018-08-02 07:20 42 ***********************
40 2018-08-02 07:25 41 **********************
... ..( 5 skipped). .. **********************
46 2018-08-02 07:55 41 **********************
47 2018-08-02 08:00 42 ***********************
48 2018-08-02 08:05 41 **********************
... ..( 8 skipped). .. **********************
57 2018-08-02 08:50 41 **********************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 8 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00 4 0 Vendor specific
0x8e01 4 0 Vendor specific
0x8e02 4 0 Vendor specific
0x8e03 4 0 Vendor specific
0x8e04 4 0 Vendor specific
0x8e05 4 0 Vendor specific
0x8e06 4 0 Vendor specific
0x8e07 4 0 Vendor specific
0x8e08 4 0 Vendor specific
0x8e09 4 0 Vendor specific
0x8e0a 4 0 Vendor specific
0x8e0b 4 0 Vendor specific
0x8e0c 4 0 Vendor specific
0x8e0d 4 0 Vendor specific
0x8e0e 4 0 Vendor specific
0x8e0f 4 0 Vendor specific
0x8e10 4 0 Vendor specific
0x8e11 4 0 Vendor specific
SMART_CTL SDC
-------------
[root@aries scripts]# smartctl --xall /dev/sdc
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-862.6.3.el7.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M9T
Device Model: ST2000LM003 HN-M201RAD
Serial Number: S377J9EGC04604
LU WWN Device Id: 5 0004cf 2116269cb
Firmware Version: 2BE10001
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Aug 2 08:51:36 2018 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (23100) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 385) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0
2 Throughput_Performance -OS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 084 082 025 - 5120
4 Start_Stop_Count -O--CK 100 100 000 - 110
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 18851
10 Spin_Retry_Count -O--CK 252 252 051 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 196
191 G-Sense_Error_Rate -O---K 252 252 000 - 0
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 055 038 000 - 45 (Min/Max 20/62)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 68
223 Load_Retry_Count -O--CK 100 100 000 - 21
225 Load_Cycle_Count -O--CK 001 001 000 - 1268887
241 Total_LBAs_Written -O--CK 097 089 000 - 5286991
242 Total_LBAs_Read -O--CK 093 088 000 - 10712309
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xc0-0xdf GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 18851 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 45 Celsius
Power Cycle Min/Max Temperature: 44/45 Celsius
Lifetime Min/Max Temperature: 20/62 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (62)
Index Estimated Time Temperature Celsius
63 2018-08-01 22:15 45 **************************
64 2018-08-01 22:20 43 ************************
65 2018-08-01 22:25 43 ************************
66 2018-08-01 22:30 44 *************************
67 2018-08-01 22:35 44 *************************
68 2018-08-01 22:40 43 ************************
... ..( 18 skipped). .. ************************
87 2018-08-02 00:15 43 ************************
88 2018-08-02 00:20 42 ***********************
89 2018-08-02 00:25 42 ***********************
90 2018-08-02 00:30 41 **********************
91 2018-08-02 00:35 40 *********************
92 2018-08-02 00:40 40 *********************
93 2018-08-02 00:45 39 ********************
... ..( 4 skipped). .. ********************
98 2018-08-02 01:10 39 ********************
99 2018-08-02 01:15 40 *********************
100 2018-08-02 01:20 40 *********************
101 2018-08-02 01:25 40 *********************
102 2018-08-02 01:30 41 **********************
103 2018-08-02 01:35 41 **********************
104 2018-08-02 01:40 41 **********************
105 2018-08-02 01:45 42 ***********************
106 2018-08-02 01:50 42 ***********************
107 2018-08-02 01:55 42 ***********************
108 2018-08-02 02:00 43 ************************
... ..( 5 skipped). .. ************************
114 2018-08-02 02:30 43 ************************
115 2018-08-02 02:35 44 *************************
... ..( 10 skipped). .. *************************
126 2018-08-02 03:30 44 *************************
127 2018-08-02 03:35 45 **************************
0 2018-08-02 03:40 46 ***************************
1 2018-08-02 03:45 47 ****************************
2 2018-08-02 03:50 48 *****************************
... ..( 5 skipped). .. *****************************
8 2018-08-02 04:20 48 *****************************
9 2018-08-02 04:25 49 ******************************
... ..( 13 skipped). .. ******************************
23 2018-08-02 05:35 49 ******************************
24 2018-08-02 05:40 48 *****************************
25 2018-08-02 05:45 49 ******************************
26 2018-08-02 05:50 49 ******************************
27 2018-08-02 05:55 48 *****************************
28 2018-08-02 06:00 47 ****************************
29 2018-08-02 06:05 47 ****************************
30 2018-08-02 06:10 46 ***************************
... ..( 2 skipped). .. ***************************
33 2018-08-02 06:25 46 ***************************
34 2018-08-02 06:30 45 **************************
... ..( 20 skipped). .. **************************
55 2018-08-02 08:15 45 **************************
56 2018-08-02 08:20 44 *************************
... ..( 4 skipped). .. *************************
61 2018-08-02 08:45 44 *************************
62 2018-08-02 08:50 45 **************************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00 4 0 Vendor specific
0x8e01 4 0 Vendor specific
0x8e02 4 0 Vendor specific
0x8e03 4 0 Vendor specific
0x8e04 4 0 Vendor specific
0x8e05 4 0 Vendor specific
0x8e06 4 0 Vendor specific
0x8e07 4 0 Vendor specific
0x8e08 4 0 Vendor specific
0x8e09 4 0 Vendor specific
0x8e0a 4 0 Vendor specific
0x8e0b 4 0 Vendor specific
0x8e0c 4 0 Vendor specific
0x8e0d 4 0 Vendor specific
0x8e0e 4 0 Vendor specific
0x8e0f 4 0 Vendor specific
0x8e10 4 0 Vendor specific
0x8e11 4 0 Vendor specific
SMART_CTL SDD
-------------
[root@aries scripts]# smartctl --xall /dev/sdd
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-862.6.3.el7.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M9T
Device Model: ST2000LM003 HN-M201RAD
Serial Number: S377J9CGC02746
LU WWN Device Id: 5 0004cf 211627645
Firmware Version: 2BE10001
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Aug 2 08:52:03 2018 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Disabled
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (21180) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 353) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 10
2 Throughput_Performance -OS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 095 090 025 - 1710
4 Start_Stop_Count -O--CK 100 100 000 - 117
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 18852
10 Spin_Retry_Count -O--CK 252 252 051 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 237
191 G-Sense_Error_Rate -O---K 252 252 000 - 0
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 056 040 000 - 44 (Min/Max 20/60)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 98
223 Load_Retry_Count -O--CK 100 100 000 - 97
225 Load_Cycle_Count -O--CK 001 001 000 - 1270967
241 Total_LBAs_Written -O--CK 099 089 000 - 1543620
242 Total_LBAs_Read -O--CK 093 088 000 - 10371670
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xc0-0xdf GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 18852 -
# 2 Short offline Interrupted (host reset) 90% 18851 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 44 Celsius
Power Cycle Min/Max Temperature: 44/44 Celsius
Lifetime Min/Max Temperature: 20/61 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (9)
Index Estimated Time Temperature Celsius
10 2018-08-01 22:15 44 *************************
11 2018-08-01 22:20 39 ********************
... ..( 2 skipped). .. ********************
14 2018-08-01 22:35 39 ********************
15 2018-08-01 22:40 40 *********************
16 2018-08-01 22:45 40 *********************
17 2018-08-01 22:50 40 *********************
18 2018-08-01 22:55 41 **********************
... ..( 3 skipped). .. **********************
22 2018-08-01 23:15 41 **********************
23 2018-08-01 23:20 42 ***********************
... ..( 6 skipped). .. ***********************
30 2018-08-01 23:55 42 ***********************
31 2018-08-02 00:00 43 ************************
... ..( 17 skipped). .. ************************
49 2018-08-02 01:30 43 ************************
50 2018-08-02 01:35 44 *************************
... ..( 15 skipped). .. *************************
66 2018-08-02 02:55 44 *************************
67 2018-08-02 03:00 46 ***************************
68 2018-08-02 03:05 48 *****************************
69 2018-08-02 03:10 49 ******************************
... ..( 3 skipped). .. ******************************
73 2018-08-02 03:30 49 ******************************
74 2018-08-02 03:35 50 *******************************
... ..( 20 skipped). .. *******************************
95 2018-08-02 05:20 50 *******************************
96 2018-08-02 05:25 49 ******************************
97 2018-08-02 05:30 47 ****************************
98 2018-08-02 05:35 49 ******************************
99 2018-08-02 05:40 48 *****************************
... ..( 4 skipped). .. *****************************
104 2018-08-02 06:05 48 *****************************
105 2018-08-02 06:10 47 ****************************
106 2018-08-02 06:15 46 ***************************
107 2018-08-02 06:20 46 ***************************
108 2018-08-02 06:25 45 **************************
... ..( 5 skipped). .. **************************
114 2018-08-02 06:55 45 **************************
115 2018-08-02 07:00 44 *************************
... ..( 21 skipped). .. *************************
9 2018-08-02 08:50 44 *************************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00 4 0 Vendor specific
0x8e01 4 0 Vendor specific
0x8e02 4 0 Vendor specific
0x8e03 4 0 Vendor specific
0x8e04 4 0 Vendor specific
0x8e05 4 0 Vendor specific
0x8e06 4 0 Vendor specific
0x8e07 4 0 Vendor specific
0x8e08 4 0 Vendor specific
0x8e09 4 0 Vendor specific
0x8e0a 4 0 Vendor specific
0x8e0b 4 0 Vendor specific
0x8e0c 4 0 Vendor specific
0x8e0d 4 0 Vendor specific
0x8e0e 4 0 Vendor specific
0x8e0f 4 0 Vendor specific
0x8e10 4 0 Vendor specific
0x8e11 4 0 Vendor specific
