Hello,
After visiting almost every google result for "mdadm reshape stuck"
and other variants, I am calling out to the experts for help.
History:
I have had a linux raid5 array running mostly issue free for many
years now. It started with 3 x 3TB drives and has grown over the years
to 5 disks. Each new drive addition has added without a problem with a
mdadm --add and mdadm --grow.
I recently purchased disk 6, to be safe I did a long smartctl test
first, I got no error so proceeded with a mdadm add/grow. But this
time the reshape got stuck almost immediately. I have rebooted many
times and re-assembled but each time I get the same result.
Reshape never progresses and eventually speed reduces to 0K/sec (I
have let it go for days)
$ cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5]
[raid4] [raid10]
md0 : active raid5 sdf1[8] sdb1[10] sdc1[7] sde1[9] sdd1[5] sdg1[6]
11721054208 blocks super 1.2 level 5, 512k chunk, algorithm 2
[6/6] [UUUUUU]
[>....................] reshape = 0.0% (120220/2930263552)
finish=9147785.2min speed=5K/sec
What I have tried:
* Force assemble
* Purchased another drive and used ddrescue to clone the other new
drive and assemble with that instead
* Upgrading mdadm
* Booting with SystemRescueCD and attempting an assemble
All of above result in the same thing, a stuck reshape at 0%
Logs and output:
https://pastebin.com/fi9pUQgD also at the end of this message. Please
let me know if I can provide anything else
Hardware:
* i3, 16GB Ram
* System disk 256G SSD
* All raid drives are running off a LSI 9211-8i HBA.
* All raid drives are segate NAS drives
If anyone has ideas I would be eternally grateful!
Cheers,
Jeremy
Directly after reboot
---------------------
$ cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5]
[raid4] [raid10]
md0 : inactive sdc1[7](S) sdb1[10](S) sde1[9](S) sdd1[5](S) sdg1[6](S)
sdf1[8](S)
17581584384 blocks super 1.2
unused devices: <none>
$ mdadm --detail /dev/md0
/dev/md0:
Version : 1.2
Raid Level : raid0
Total Devices : 6
Persistence : Superblock is persistent
State : inactive
Delta Devices : 1, (-1->0)
New Level : raid5
New Layout : left-symmetric
New Chunksize : 512K
Name : homer2:1
UUID : f39f89d2:1bcd3d55:d173d206:d85b8bbc
Events : 4830576
Number Major Minor RaidDevice
- 8 17 - /dev/sdb1
- 8 33 - /dev/sdc1
- 8 49 - /dev/sdd1
- 8 65 - /dev/sde1
- 8 81 - /dev/sdf1
- 8 97 - /dev/sdg1
Assemble the array
------------------
$ export MDADM_GROW_ALLOW_OLD=1
** Grow allow old used as thought the new drive was faulty and
attempted to assemble array with it unplugged **
$ mdadm --stop /dev/md0
mdadm: stopped /dev/md0
$ mdadm --assemble -v /dev/md0 /dev/sd[bcdefg]1
mdadm: looking for devices for /dev/md0
mdadm: /dev/sdb1 is identified as a member of /dev/md0, slot 5.
mdadm: /dev/sdc1 is identified as a member of /dev/md0, slot 4.
mdadm: /dev/sdd1 is identified as a member of /dev/md0, slot 2.
mdadm: /dev/sde1 is identified as a member of /dev/md0, slot 3.
mdadm: /dev/sdf1 is identified as a member of /dev/md0, slot 0.
mdadm: /dev/sdg1 is identified as a member of /dev/md0, slot 1.
mdadm: /dev/md0 has an active reshape - checking if critical section
needs to be restored
mdadm: accepting backup with timestamp 1511984338 for array with
timestamp 1512378131
mdadm: backup-metadata found on device-5 but is not needed
mdadm: added /dev/sdg1 to /dev/md0 as 1
mdadm: added /dev/sdd1 to /dev/md0 as 2
mdadm: added /dev/sde1 to /dev/md0 as 3
mdadm: added /dev/sdc1 to /dev/md0 as 4
mdadm: added /dev/sdb1 to /dev/md0 as 5
mdadm: added /dev/sdf1 to /dev/md0 as 0
mdadm: /dev/md0 has been started with 6 drives.
$ cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5]
[raid4] [raid10]
md0 : active raid5 sdf1[8] sdb1[10] sdc1[7] sde1[9] sdd1[5] sdg1[6]
11721054208 blocks super 1.2 level 5, 512k chunk, algorithm 2
[6/6] [UUUUUU]
[>....................] reshape = 0.0% (120220/2930263552)
finish=187144.1min speed=260K/sec
unused devices: <none>
** Progress never changes, speed reduces eventually to 0K/sec **
$ mdadm --examine /dev/sd[bcdefg]1
/dev/sdb1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x4
Array UUID : f39f89d2:1bcd3d55:d173d206:d85b8bbc
Name : homer2:1
Creation Time : Sun Dec 2 12:04:24 2012
Raid Level : raid5
Raid Devices : 6
Avail Dev Size : 5860528128 (2794.52 GiB 3000.59 GB)
Array Size : 14651317760 (13972.59 GiB 15002.95 GB)
Used Dev Size : 5860527104 (2794.52 GiB 3000.59 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
Unused Space : before=1960 sectors, after=1024 sectors
State : active
Device UUID : d185c556:52b345e2:244ff3c8:9210bf26
Reshape pos'n : 491520 (480.00 MiB 503.32 MB)
Delta Devices : 1 (5->6)
Update Time : Tue Dec 5 18:30:50 2017
Bad Block Log : 512 entries available at offset 72 sectors
Checksum : b8e49d67 - correct
Events : 4830578
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 5
Array State : AAAAAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdc1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x4
Array UUID : f39f89d2:1bcd3d55:d173d206:d85b8bbc
Name : homer2:1
Creation Time : Sun Dec 2 12:04:24 2012
Raid Level : raid5
Raid Devices : 6
Avail Dev Size : 5860528128 (2794.52 GiB 3000.59 GB)
Array Size : 14651317760 (13972.59 GiB 15002.95 GB)
Used Dev Size : 5860527104 (2794.52 GiB 3000.59 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
Unused Space : before=1968 sectors, after=1024 sectors
State : active
Device UUID : 96958379:2ca77922:2065aa7b:26b9afae
Reshape pos'n : 491520 (480.00 MiB 503.32 MB)
Delta Devices : 1 (5->6)
Update Time : Tue Dec 5 18:30:50 2017
Checksum : 56765f4b - correct
Events : 4830578
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 4
Array State : AAAAAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdd1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x4
Array UUID : f39f89d2:1bcd3d55:d173d206:d85b8bbc
Name : homer2:1
Creation Time : Sun Dec 2 12:04:24 2012
Raid Level : raid5
Raid Devices : 6
Avail Dev Size : 5860528128 (2794.52 GiB 3000.59 GB)
Array Size : 14651317760 (13972.59 GiB 15002.95 GB)
Used Dev Size : 5860527104 (2794.52 GiB 3000.59 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
Unused Space : before=1968 sectors, after=1024 sectors
State : active
Device UUID : b9fc27cb:36f08923:64d5979a:45d24263
Reshape pos'n : 491520 (480.00 MiB 503.32 MB)
Delta Devices : 1 (5->6)
Update Time : Tue Dec 5 18:30:50 2017
Checksum : 7cab98d9 - correct
Events : 4830578
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 2
Array State : AAAAAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sde1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0xc
Array UUID : f39f89d2:1bcd3d55:d173d206:d85b8bbc
Name : homer2:1
Creation Time : Sun Dec 2 12:04:24 2012
Raid Level : raid5
Raid Devices : 6
Avail Dev Size : 5860528128 (2794.52 GiB 3000.59 GB)
Array Size : 14651317760 (13972.59 GiB 15002.95 GB)
Used Dev Size : 5860527104 (2794.52 GiB 3000.59 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
Unused Space : before=1960 sectors, after=1024 sectors
State : active
Device UUID : a33aacb4:00d283ef:5715be52:a0678279
Reshape pos'n : 491520 (480.00 MiB 503.32 MB)
Delta Devices : 1 (5->6)
Update Time : Tue Dec 5 18:30:50 2017
Bad Block Log : 512 entries available at offset 72 sectors - bad
blocks present.
Checksum : 978e30 - correct
Events : 4830578
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 3
Array State : AAAAAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdf1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0xc
Array UUID : f39f89d2:1bcd3d55:d173d206:d85b8bbc
Name : homer2:1
Creation Time : Sun Dec 2 12:04:24 2012
Raid Level : raid5
Raid Devices : 6
Avail Dev Size : 5860528128 (2794.52 GiB 3000.59 GB)
Array Size : 14651317760 (13972.59 GiB 15002.95 GB)
Used Dev Size : 5860527104 (2794.52 GiB 3000.59 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
Unused Space : before=1960 sectors, after=1024 sectors
State : active
Device UUID : cabeb84a:b5df18c9:cb378062:be0f8998
Reshape pos'n : 491520 (480.00 MiB 503.32 MB)
Delta Devices : 1 (5->6)
Update Time : Tue Dec 5 18:30:50 2017
Bad Block Log : 512 entries available at offset 72 sectors - bad
blocks present.
Checksum : 9f01ea9c - correct
Events : 4830578
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 0
Array State : AAAAAA ('A' == active, '.' == missing, 'R' == replacing)
/dev/sdg1:
Magic : a92b4efc
Version : 1.2
Feature Map : 0x4
Array UUID : f39f89d2:1bcd3d55:d173d206:d85b8bbc
Name : homer2:1
Creation Time : Sun Dec 2 12:04:24 2012
Raid Level : raid5
Raid Devices : 6
Avail Dev Size : 5860528128 (2794.52 GiB 3000.59 GB)
Array Size : 14651317760 (13972.59 GiB 15002.95 GB)
Used Dev Size : 5860527104 (2794.52 GiB 3000.59 GB)
Data Offset : 2048 sectors
Super Offset : 8 sectors
Unused Space : before=1968 sectors, after=1024 sectors
State : active
Device UUID : 35c83ff2:9c960c86:4982f67a:e4720c3b
Reshape pos'n : 491520 (480.00 MiB 503.32 MB)
Delta Devices : 1 (5->6)
Update Time : Tue Dec 5 18:30:50 2017
Checksum : be6e5840 - correct
Events : 4830578
Layout : left-symmetric
Chunk Size : 512K
Device Role : Active device 1
Array State : AAAAAA ('A' == active, '.' == missing, 'R' == replacing)
** Reshape pos'n is always: 491520 (480.00 MiB 503.32 MB) **
$ mdadm --examine /dev/sd[bcdefg]
/dev/sdb:
MBR Magic : aa55
Partition[0] : 4294967295 sectors at 1 (type ee)
/dev/sdc:
MBR Magic : aa55
Partition[0] : 4294967295 sectors at 1 (type ee)
/dev/sdd:
MBR Magic : aa55
Partition[0] : 4294967295 sectors at 1 (type ee)
/dev/sde:
MBR Magic : aa55
Partition[0] : 4294967295 sectors at 1 (type ee)
/dev/sdf:
MBR Magic : aa55
Partition[0] : 4294967295 sectors at 1 (type ee)
/dev/sdg:
MBR Magic : aa55
Partition[0] : 4294967295 sectors at 1 (type ee)
$ mdadm --detail /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Sun Dec 2 12:04:24 2012
Raid Level : raid5
Array Size : 11721054208 (11178.07 GiB 12002.36 GB)
Used Dev Size : 2930263552 (2794.52 GiB 3000.59 GB)
Raid Devices : 6
Total Devices : 6
Persistence : Superblock is persistent
Update Time : Tue Dec 5 18:30:50 2017
State : active, reshaping
Active Devices : 6
Working Devices : 6
Failed Devices : 0
Spare Devices : 0
Layout : left-symmetric
Chunk Size : 512K
Reshape Status : 0% complete
Delta Devices : 1, (5->6)
Name : homer2:1
UUID : f39f89d2:1bcd3d55:d173d206:d85b8bbc
Events : 4830578
Number Major Minor RaidDevice State
8 8 81 0 active sync /dev/sdf1
6 8 97 1 active sync /dev/sdg1
5 8 49 2 active sync /dev/sdd1
9 8 65 3 active sync /dev/sde1
7 8 33 4 active sync /dev/sdc1
10 8 17 5 active sync /dev/sdb1
$ dmesg
[69979.860466] md: md0 stopped.
[69979.884579] md: bind<sdg1>
[69979.903373] md: bind<sdd1>
[69979.903750] md: bind<sde1>
[69979.903939] md: bind<sdc1>
[69979.922600] md: bind<sdb1>
[69979.922958] md: bind<sdf1>
[69979.932462] md/raid:md0: not clean -- starting background reconstruction
[69979.932467] md/raid:md0: reshape will continue
[69979.932486] md/raid:md0: device sdf1 operational as raid disk 0
[69979.932488] md/raid:md0: device sdb1 operational as raid disk 5
[69979.932489] md/raid:md0: device sdc1 operational as raid disk 4
[69979.932490] md/raid:md0: device sde1 operational as raid disk 3
[69979.932491] md/raid:md0: device sdd1 operational as raid disk 2
[69979.932493] md/raid:md0: device sdg1 operational as raid disk 1
[69979.932912] md/raid:md0: allocated 6490kB
[69979.932943] md/raid:md0: raid level 5 active with 6 out of 6
devices, algorithm 2
[69979.932945] RAID conf printout:
[69979.932947] --- level:5 rd:6 wd:6
[69979.932948] disk 0, o:1, dev:sdf1
[69979.932950] disk 1, o:1, dev:sdg1
[69979.932951] disk 2, o:1, dev:sdd1
[69979.932952] disk 3, o:1, dev:sde1
[69979.932954] disk 4, o:1, dev:sdc1
[69979.932955] disk 5, o:1, dev:sdb1
[69979.933007] md0: detected capacity change from 0 to 12002359508992
[69979.933130] md: reshape of RAID array md0
[69979.933132] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[69979.933134] md: using maximum available idle IO bandwidth (but not
more than 200000 KB/sec) for reshape.
[69979.933139] md: using 128k window, over a total of 2930263552k.
[70197.635112] INFO: task md0_reshape:30529 blocked for more than 120 seconds.
[70197.635142] Not tainted 4.4.0-101-generic #124-Ubuntu
[70197.635161] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[70197.635187] md0_reshape D ffff88011da37aa8 0 30529 2 0x00000000
[70197.635191] ffff88011da37aa8 ffff88011da37a78 ffff880214a40e00
ffff880210577000
[70197.635193] ffff88011da38000 ffff8800d49de424 ffff8800d49de658
ffff8800d49de638
[70197.635194] ffff8800d49de670 ffff88011da37ac0 ffffffff818406d5
ffff8800d49de400
[70197.635196] Call Trace:
[70197.635202] [<ffffffff818406d5>] schedule+0x35/0x80
[70197.635206] [<ffffffffc034045f>]
raid5_get_active_stripe+0x31f/0x700 [raid456]
[70197.635210] [<ffffffff810c4420>] ? wake_atomic_t_function+0x60/0x60
[70197.635212] [<ffffffffc0344da4>] reshape_request+0x584/0x950 [raid456]
[70197.635215] [<ffffffff810a9c6a>] ? finish_task_switch+0x7a/0x220
[70197.635218] [<ffffffffc034548c>] sync_request+0x31c/0x3a0 [raid456]
[70197.635219] [<ffffffff81840026>] ? __schedule+0x3b6/0xa30
[70197.635222] [<ffffffff814102b5>] ? find_next_bit+0x15/0x20
[70197.635225] [<ffffffff81710bb1>] ? is_mddev_idle+0x9c/0xfa
[70197.635227] [<ffffffff816adbbc>] md_do_sync+0x89c/0xe60
[70197.635229] [<ffffffff810c4420>] ? wake_atomic_t_function+0x60/0x60
[70197.635231] [<ffffffff816aa319>] md_thread+0x139/0x150
[70197.635233] [<ffffffff810c4420>] ? wake_atomic_t_function+0x60/0x60
[70197.635234] [<ffffffff816aa1e0>] ? find_pers+0x70/0x70
[70197.635236] [<ffffffff810a0c75>] kthread+0xe5/0x100
[70197.635237] [<ffffffff810a0b90>] ? kthread_create_on_node+0x1e0/0x1e0
[70197.635239] [<ffffffff81844b8f>] ret_from_fork+0x3f/0x70
[70197.635241] [<ffffffff810a0b90>] ? kthread_create_on_node+0x1e0/0x1e0
[70317.630767] INFO: task md0_reshape:30529 blocked for more than 120 seconds.
[70317.630796] Not tainted 4.4.0-101-generic #124-Ubuntu
[70317.630815] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[70317.630841] md0_reshape D ffff88011da37aa8 0 30529 2 0x00000000
[70317.630844] ffff88011da37aa8 ffff88011da37a78 ffff880214a40e00
ffff880210577000
[70317.630846] ffff88011da38000 ffff8800d49de424 ffff8800d49de658
ffff8800d49de638
[70317.630848] ffff8800d49de670 ffff88011da37ac0 ffffffff818406d5
ffff8800d49de400
[70317.630850] Call Trace:
[70317.630855] [<ffffffff818406d5>] schedule+0x35/0x80
[70317.630860] [<ffffffffc034045f>]
raid5_get_active_stripe+0x31f/0x700 [raid456]
[70317.630863] [<ffffffff810c4420>] ? wake_atomic_t_function+0x60/0x60
[70317.630866] [<ffffffffc0344da4>] reshape_request+0x584/0x950 [raid456]
[70317.630868] [<ffffffff810a9c6a>] ? finish_task_switch+0x7a/0x220
[70317.630871] [<ffffffffc034548c>] sync_request+0x31c/0x3a0 [raid456]
[70317.630872] [<ffffffff81840026>] ? __schedule+0x3b6/0xa30
[70317.630876] [<ffffffff814102b5>] ? find_next_bit+0x15/0x20
[70317.630878] [<ffffffff81710bb1>] ? is_mddev_idle+0x9c/0xfa
[70317.630881] [<ffffffff816adbbc>] md_do_sync+0x89c/0xe60
[70317.630883] [<ffffffff810c4420>] ? wake_atomic_t_function+0x60/0x60
[70317.630885] [<ffffffff816aa319>] md_thread+0x139/0x150
[70317.630886] [<ffffffff810c4420>] ? wake_atomic_t_function+0x60/0x60
[70317.630888] [<ffffffff816aa1e0>] ? find_pers+0x70/0x70
[70317.630890] [<ffffffff810a0c75>] kthread+0xe5/0x100
[70317.630892] [<ffffffff810a0b90>] ? kthread_create_on_node+0x1e0/0x1e0
[70317.630894] [<ffffffff81844b8f>] ret_from_fork+0x3f/0x70
[70317.630896] [<ffffffff810a0b90>] ? kthread_create_on_node+0x1e0/0x1e0
$ uname -a
Linux homer 4.4.0-101-generic #124-Ubuntu SMP Fri Nov 10 18:29:59 UTC
2017 x86_64 x86_64 x86_64 GNU/Linux
$ mdadm --version
mdadm - v3.4 - 28th January 2016
$ ps aux | grep md0
root 2086 0.0 0.0 14220 940 pts/0 S+ 18:49 0:00 grep
--color=auto md0
root 30528 99.9 0.0 0 0 ? R 18:30 18:35 [md0_raid5]
root 30529 0.0 0.0 0 0 ? D 18:30 0:00 [md0_reshape]
** md0_raid5 always at 100%, md0_reshape always at 0% **
$ cat /sys/block/md0/md/stripe_cache_size
513
$ echo 16384 > /sys/block/md0/md/stripe_cache_size
$ cat /sys/block/md0/md/stripe_cache_size
16384
$ iostat
Linux 4.4.0-101-generic (homer) 12/05/2017 _x86_64_ (4 CPU)
avg-cpu: %user %nice %system %iowait %steal %idle
2.71 0.03 1.11 0.37 0.00 95.78
Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn
sda 122.04 126.50 1068.10 9006825 76047672
sdb 0.00 0.04 0.31 2543 21918
sdc 0.01 0.47 0.31 33113 21918
sdd 0.01 0.47 0.31 33141 21918
sdf 0.01 0.47 0.31 33665 21922
sde 0.01 0.47 0.31 33637 21922
sdg 0.01 0.47 0.31 33125 21918
md0 0.00 0.01 0.00 1036 0
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 223.6G 0 disk
├─sda1 8:1 0 215.7G 0 part /
├─sda2 8:2 0 1K 0 part
└─sda5 8:5 0 7.9G 0 part [SWAP]
sdb 8:16 0 2.7T 0 disk
└─sdb1 8:17 0 2.7T 0 part
└─md0 9:0 0 10.9T 0 raid5
sdc 8:32 0 2.7T 0 disk
└─sdc1 8:33 0 2.7T 0 part
└─md0 9:0 0 10.9T 0 raid5
sdd 8:48 0 2.7T 0 disk
└─sdd1 8:49 0 2.7T 0 part
└─md0 9:0 0 10.9T 0 raid5
sde 8:64 0 2.7T 0 disk
└─sde1 8:65 0 2.7T 0 part
└─md0 9:0 0 10.9T 0 raid5
sdf 8:80 0 2.7T 0 disk
└─sdf1 8:81 0 2.7T 0 part
└─md0 9:0 0 10.9T 0 raid5
sdg 8:96 0 2.7T 0 disk
└─sdg1 8:97 0 2.7T 0 part
└─md0 9:0 0 10.9T 0 raid5
$ for disk in {b,c,d,e,f,g}; do smartctl -a /dev/sd${disk}1; done
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-101-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST3000VN007-2E4166
Serial Number: Z6A0Z4MY
LU WWN Device Id: 5 000c50 0a3c31b28
Firmware Version: SC60
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5900 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Dec 5 19:00:40 2017 AEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 107) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 376) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 006 Pre-fail
Always - 209008
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 4
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail
Always - 45978
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 78
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 4
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 088 088 000 Old_age
Always - 12
190 Airflow_Temperature_Cel 0x0022 061 058 045 Old_age
Always - 39 (Min/Max 38/40)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 4
193 Load_Cycle_Count 0x0032 100 100 000 Old_age
Always - 4
194 Temperature_Celsius 0x0022 039 042 000 Old_age
Always - 39 (0 22 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 78 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-101-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate NAS HDD
Device Model: ST3000VN000-1HJ166
Serial Number: W6A077L9
LU WWN Device Id: 5 000c50 07d588414
Firmware Version: SC60
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5900 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Dec 5 19:00:40 2017 AEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 107) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 389) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail
Always - 163598304
3 Spin_Up_Time 0x0003 094 093 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 42
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail
Always - 108755626
9 Power_On_Hours 0x0032 074 074 000 Old_age
Always - 23572
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 42
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 019 019 000 Old_age
Always - 81
190 Airflow_Temperature_Cel 0x0022 067 060 045 Old_age
Always - 33 (Min/Max 32/34)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 26
193 Load_Cycle_Count 0x0032 100 100 000 Old_age
Always - 1011
194 Temperature_Celsius 0x0022 033 040 000 Old_age
Always - 33 (0 23 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 12035 -
# 2 Short offline Completed without error 00% 11911 -
# 3 Short offline Completed without error 00% 10759 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-101-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate NAS HDD
Device Model: ST3000VN000-1HJ166
Serial Number: W6A07K5E
LU WWN Device Id: 5 000c50 07d5cca73
Firmware Version: SC60
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5900 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Dec 5 19:00:41 2017 AEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 97) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 386) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail
Always - 85334928
3 Spin_Up_Time 0x0003 094 093 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 60
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail
Always - 107935868
9 Power_On_Hours 0x0032 073 073 000 Old_age
Always - 23904
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 60
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 001 001 000 Old_age
Always - 118
190 Airflow_Temperature_Cel 0x0022 066 058 045 Old_age
Always - 34 (Min/Max 33/35)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 39
193 Load_Cycle_Count 0x0032 100 100 000 Old_age
Always - 1043
194 Temperature_Celsius 0x0022 034 042 000 Old_age
Always - 34 (0 23 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 12367 -
# 2 Short offline Completed without error 00% 12243 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-101-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate NAS HDD
Device Model: ST3000VN000-1HJ166
Serial Number: W6A1GLG8
LU WWN Device Id: 5 000c50 09b618897
Firmware Version: SC60
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5900 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Dec 5 19:00:41 2017 AEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 107) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 379) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 099 006 Pre-fail
Always - 169536040
3 Spin_Up_Time 0x0003 094 093 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 27
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail
Always - 46431252
9 Power_On_Hours 0x0032 086 086 000 Old_age
Always - 12765
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 27
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 083 083 000 Old_age
Always - 17
190 Airflow_Temperature_Cel 0x0022 065 059 045 Old_age
Always - 35 (Min/Max 34/36)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 22
193 Load_Cycle_Count 0x0032 100 100 000 Old_age
Always - 62
194 Temperature_Celsius 0x0022 035 041 000 Old_age
Always - 35 (0 19 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 1229 -
# 2 Short offline Completed without error 00% 1105 -
# 3 Short offline Completed without error 00% 1090 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-101-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate NAS HDD
Device Model: ST3000VN000-1HJ166
Serial Number: W6A0TLA6
LU WWN Device Id: 5 000c50 08b715e4e
Firmware Version: SC60
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5900 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Dec 5 19:00:41 2017 AEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 107) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 387) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail
Always - 83913088
3 Spin_Up_Time 0x0003 094 093 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 31
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail
Always - 47812930
9 Power_On_Hours 0x0032 086 086 000 Old_age
Always - 12820
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 31
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 034 034 000 Old_age
Always - 66
190 Airflow_Temperature_Cel 0x0022 063 057 045 Old_age
Always - 37 (Min/Max 35/38)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 23
193 Load_Cycle_Count 0x0032 100 100 000 Old_age
Always - 559
194 Temperature_Celsius 0x0022 037 043 000 Old_age
Always - 37 (0 21 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 1284 -
# 2 Short offline Completed without error 00% 1160 -
# 3 Short offline Completed without error 00% 1145 -
# 4 Short offline Completed without error 00% 8 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.4.0-101-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate NAS HDD
Device Model: ST3000VN000-1HJ166
Serial Number: W6A07KJY
LU WWN Device Id: 5 000c50 07d5cb95b
Firmware Version: SC60
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5900 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Dec 5 19:00:41 2017 AEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 107) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 392) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail
Always - 109735048
3 Spin_Up_Time 0x0003 094 093 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 48
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail
Always - 108007271
9 Power_On_Hours 0x0032 073 073 000 Old_age
Always - 23829
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 48
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age
Always - 8
189 High_Fly_Writes 0x003a 015 015 000 Old_age
Always - 85
190 Airflow_Temperature_Cel 0x0022 063 058 045 Old_age
Always - 37 (Min/Max 35/38)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 29
193 Load_Cycle_Count 0x0032 100 100 000 Old_age
Always - 1029
194 Temperature_Celsius 0x0022 037 042 000 Old_age
Always - 37 (0 24 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age
Always - 3577
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 12293 -
# 2 Short offline Completed without error 00% 12169 -
# 3 Extended offline Completed without error 00% 475 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
end<div id="DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2"><br />
<table style="border-top: 1px solid #D3D4DE;">
<tr>
<td style="width: 55px; padding-top: 13px;"><a
href="http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail";
target="_blank"><img
src="https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png";
alt="" width="46" height="29" style="width: 46px; height: 29px;"
/></a></td>
<td style="width: 470px; padding-top: 12px; color: #41424e;
font-size: 13px; font-family: Arial, Helvetica, sans-serif;
line-height: 18px;">Virus-free. <a
href="http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail";
target="_blank" style="color: #4453ea;">www.avg.com</a>
</td>
</tr>
</table><a href="#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2" width="1"
height="1"></a></div>
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
![https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png"](https://ipmcdn.avast.com/images/icons/icon-envelope-tick-green-avg-v1.png"){kind=link}
