root@jowahome:~# dmesg >before
root@jowahome:~# strace mdadm -A /dev/md2014 /dev/sdc1 /dev/sdb1
execve("/sbin/mdadm", ["mdadm", "-A", "/dev/md2014", "/dev/sdc1",
"/dev/sdb1"], [/* 15 vars */]) = 0
brk(NULL) = 0x55b9563e6000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap(NULL, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x7faf336f6000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=116207, ...}) = 0
mmap(NULL, 116207, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7faf336d9000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\r\0\0\0\0\0\0"...,
832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=14640, ...}) = 0
mmap(NULL, 2109680, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x7faf332d2000
mprotect(0x7faf332d5000, 2093056, PROT_NONE) = 0
mmap(0x7faf334d4000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7faf334d4000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\3\2\0\0\0\0\0"...,
832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1689360, ...}) = 0
mmap(NULL, 3795360, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0x7faf32f33000
mprotect(0x7faf330c8000, 2097152, PROT_NONE) = 0
mmap(0x7faf332c8000, 24576, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x195000) = 0x7faf332c8000
mmap(0x7faf332ce000, 14752, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7faf332ce000
close(3) = 0
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x7faf336d7000
arch_prctl(ARCH_SET_FS, 0x7faf336d7700) = 0
mprotect(0x7faf332c8000, 16384, PROT_READ) = 0
mprotect(0x7faf334d4000, 4096, PROT_READ) = 0
mprotect(0x55b9558df000, 4096, PROT_READ) = 0
mprotect(0x7faf336f9000, 4096, PROT_READ) = 0
munmap(0x7faf336d9000, 116207) = 0
getpid() = 19817
brk(NULL) = 0x55b9563e6000
brk(0x55b956407000) = 0x55b956407000
open("/dev/md2014", O_RDWR) = -1 ENOENT (No such file or directory)
open("/etc/mdadm/mdadm.conf", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=662, ...}) = 0
fstat(3, {st_mode=S_IFREG|0644, st_size=662, ...}) = 0
read(3, "# mdadm.conf\n#\n# Please refer to"..., 4096) = 662
read(3, "", 4096) = 0
read(3, "", 4096) = 0
fstat(3, {st_mode=S_IFREG|0644, st_size=662, ...}) = 0
close(3) = 0
open("/etc/mdadm/mdadm.conf.d", O_RDONLY) = -1 ENOENT (No such file or
directory)
uname({sysname="Linux", nodename="jowahome", ...}) = 0
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=116207, ...}) = 0
mmap(NULL, 116207, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7faf336d9000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/tls/x86_64/libdlm_lt.so.3",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/lib/x86_64-linux-gnu/tls/x86_64", 0x7ffdf2b634c0) = -1 ENOENT
(No such file or directory)
open("/lib/x86_64-linux-gnu/tls/libdlm_lt.so.3", O_RDONLY|O_CLOEXEC) =
-1 ENOENT (No such file or directory)
stat("/lib/x86_64-linux-gnu/tls", 0x7ffdf2b634c0) = -1 ENOENT (No such
file or directory)
open("/lib/x86_64-linux-gnu/x86_64/libdlm_lt.so.3",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/lib/x86_64-linux-gnu/x86_64", 0x7ffdf2b634c0) = -1 ENOENT (No
such file or directory)
open("/lib/x86_64-linux-gnu/libdlm_lt.so.3", O_RDONLY|O_CLOEXEC) = -1
ENOENT (No such file or directory)
stat("/lib/x86_64-linux-gnu", {st_mode=S_IFDIR|0755, st_size=12288, ...}) = 0
open("/usr/lib/x86_64-linux-gnu/tls/x86_64/libdlm_lt.so.3",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/usr/lib/x86_64-linux-gnu/tls/x86_64", 0x7ffdf2b634c0) = -1
ENOENT (No such file or directory)
open("/usr/lib/x86_64-linux-gnu/tls/libdlm_lt.so.3",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/usr/lib/x86_64-linux-gnu/tls", 0x7ffdf2b634c0) = -1 ENOENT (No
such file or directory)
open("/usr/lib/x86_64-linux-gnu/x86_64/libdlm_lt.so.3",
O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/usr/lib/x86_64-linux-gnu/x86_64", 0x7ffdf2b634c0) = -1 ENOENT
(No such file or directory)
open("/usr/lib/x86_64-linux-gnu/libdlm_lt.so.3", O_RDONLY|O_CLOEXEC) =
-1 ENOENT (No such file or directory)
stat("/usr/lib/x86_64-linux-gnu", {st_mode=S_IFDIR|0755,
st_size=90112, ...}) = 0
open("/lib/tls/x86_64/libdlm_lt.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT
(No such file or directory)
stat("/lib/tls/x86_64", 0x7ffdf2b634c0) = -1 ENOENT (No such file or directory)
open("/lib/tls/libdlm_lt.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No
such file or directory)
stat("/lib/tls", 0x7ffdf2b634c0) = -1 ENOENT (No such file or directory)
open("/lib/x86_64/libdlm_lt.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No
such file or directory)
stat("/lib/x86_64", 0x7ffdf2b634c0) = -1 ENOENT (No such file or directory)
open("/lib/libdlm_lt.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such
file or directory)
stat("/lib", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
open("/usr/lib/tls/x86_64/libdlm_lt.so.3", O_RDONLY|O_CLOEXEC) = -1
ENOENT (No such file or directory)
stat("/usr/lib/tls/x86_64", 0x7ffdf2b634c0) = -1 ENOENT (No such file
or directory)
open("/usr/lib/tls/libdlm_lt.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT
(No such file or directory)
stat("/usr/lib/tls", 0x7ffdf2b634c0) = -1 ENOENT (No such file or directory)
open("/usr/lib/x86_64/libdlm_lt.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT
(No such file or directory)
stat("/usr/lib/x86_64", 0x7ffdf2b634c0) = -1 ENOENT (No such file or directory)
open("/usr/lib/libdlm_lt.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No
such file or directory)
stat("/usr/lib", {st_mode=S_IFDIR|0755, st_size=16384, ...}) = 0
munmap(0x7faf336d9000, 116207) = 0
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=116207, ...}) = 0
mmap(NULL, 116207, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7faf336d9000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/x86_64-linux-gnu/libcmap.so.4", O_RDONLY|O_CLOEXEC) = -1
ENOENT (No such file or directory)
open("/usr/lib/x86_64-linux-gnu/libcmap.so.4", O_RDONLY|O_CLOEXEC) =
-1 ENOENT (No such file or directory)
open("/lib/libcmap.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such
file or directory)
open("/usr/lib/libcmap.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such
file or directory)
munmap(0x7faf336d9000, 116207) = 0
geteuid() = 0
open("/dev/sdc1", O_RDONLY|O_DIRECT) = 3
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, RAID_VERSION, 0x7ffdf2b63450) = -1 ENOTTY (Inappropriate
ioctl for device)
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
lseek(3, 3000591384576, SEEK_SET) = 3000591384576
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
4096) = 4096
ioctl(3, BLKSSZGET, [512]) = 0
ioctl(3, BLKSSZGET, [512]) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
lseek(3, 3000591441920, SEEK_SET) = 3000591441920
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
4096) = 4096
lseek(3, 0, SEEK_CUR) = 3000591446016
ioctl(3, BLKSSZGET, [512]) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
lseek(3, 0, SEEK_SET) = 0
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
4096) = 4096
lseek(3, 0, SEEK_CUR) = 4096
ioctl(3, BLKSSZGET, [512]) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
lseek(3, 4096, SEEK_SET) = 4096
read(3, "\374N+\251\1\0\0\0\0\0\0\0\0\0\0\0C\333\256\306[\26}\250\1\277#-\302\30\353l"...,
4096) = 4096
lseek(3, 0, SEEK_CUR) = 8192
ioctl(3, BLKSSZGET, [512]) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
lseek(3, 4096, SEEK_SET) = 4096
read(3, "\374N+\251\1\0\0\0\0\0\0\0\0\0\0\0C\333\256\306[\26}\250\1\277#-\302\30\353l"...,
4096) = 4096
lseek(3, 0, SEEK_CUR) = 8192
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
ioctl(3, BLKPG, {BLKPG_DEL_PARTITION, flags=0, datalen=152,
data={start=0, length=0, pno=1073741824, devname="", volname=""}}) =
-1 EINVAL (Invalid argument)
ioctl(3, BLKPG, {BLKPG_DEL_PARTITION, flags=0, datalen=152,
data={start=0, length=0, pno=1073741824, devname="", volname=""}}) =
-1 EINVAL (Invalid argument)
lseek(3, 0, SEEK_SET) = 0
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
512) = 512
lseek(3, 0, SEEK_SET) = 0
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
512) = 512
ioctl(3, BLKSSZGET, [512]) = 0
ioctl(3, BLKSSZGET, [512]) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
lseek(3, 3000591441920, SEEK_SET) = 3000591441920
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
4096) = 4096
lseek(3, 0, SEEK_CUR) = 3000591446016
ioctl(3, BLKSSZGET, [512]) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
lseek(3, 0, SEEK_SET) = 0
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"...,
4096) = 4096
lseek(3, 0, SEEK_CUR) = 4096
ioctl(3, BLKSSZGET, [512]) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
lseek(3, 4096, SEEK_SET) = 4096
read(3, "\374N+\251\1\0\0\0\0\0\0\0\0\0\0\0C\333\256\306[\26}\250\1\277#-\302\30\353l"...,
4096) = 4096
lseek(3, 0, SEEK_CUR) = 8192
ioctl(3, BLKSSZGET, [512]) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
lseek(3, 4096, SEEK_SET) = 4096
read(3, "\374N+\251\1\0\0\0\0\0\0\0\0\0\0\0C\333\256\306[\26}\250\1\277#-\302\30\353l"...,
4096) = 4096
lseek(3, 0, SEEK_CUR) = 8192
ioctl(3, BLKSSZGET, [512]) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 33), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
lseek(3, 4096, SEEK_SET) = 4096
read(3, "\374N+\251\1\0\0\0\0\0\0\0\0\0\0\0C\333\256\306[\26}\250\1\277#-\302\30\353l"...,
4096) = 4096
lseek(3, 0, SEEK_CUR) = 8192
close(3) = 0
open("/dev/sdc1", O_RDONLY|O_EXCL|O_DIRECT) = 3
close(3) = 0
stat("/sys/dev/block/8:33/partition", {st_mode=S_IFREG|0444,
st_size=4096, ...}) = 0
open("/dev/sdb1", O_RDONLY|O_DIRECT) = 3
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 17), ...}) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 17), ...}) = 0
ioctl(3, RAID_VERSION, 0x7ffdf2b63450) = -1 ENOTTY (Inappropriate
ioctl for device)
ioctl(3, BLKSSZGET, [512]) = 0
fstat(3, {st_mode=S_IFBLK|0660, st_rdev=makedev(8, 17), ...}) = 0
ioctl(3, BLKGETSIZE64, [3000591450112]) = 0
lseek(3, 4096, SEEK_SET) = 4096
read(3, "\374N+\251\1\0\0\0\0\0\0\0\0\0\0\0C\333\256\306[\26}\250\1\277#-\302\30\353l"...,
4096) = 4096
lseek(3, 0, SEEK_CUR) = 8192
close(3) = 0
open("/dev/sdb1", O_RDONLY|O_EXCL|O_DIRECT) = 3
close(3) = 0
stat("/sys/dev/block/8:17/partition", {st_mode=S_IFREG|0444,
st_size=4096, ...}) = 0
mkdir("/run/mdadm", 0755) = -1 EEXIST (File exists)
open("/run/mdadm/map.lock", O_RDWR|O_CREAT|O_TRUNC, 0600) = 3
fcntl(3, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE)
flock(3, LOCK_EX) = 0
fstat(3, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
open("/run/mdadm/map", O_RDONLY) = 4
fcntl(4, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
fstat(4, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
read(4, "", 4096) = 0
close(4) = 0
open("/run/mdadm/map", O_RDONLY) = 4
fcntl(4, F_GETFL) = 0x8000 (flags O_RDONLY|O_LARGEFILE)
fstat(4, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
read(4, "", 4096) = 0
close(4) = 0
open("/proc/mdstat", O_RDONLY) = 4
fcntl(4, F_SETFD, FD_CLOEXEC) = 0
fstat(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(4, "Personalities : [linear] [multip"..., 1024) = 110
read(4, "", 1024) = 0
read(4, "", 1024) = 0
close(4) = 0
stat("/dev/.udev", 0x7ffdf2b631f0) = -1 ENOENT (No such file or directory)
stat("/run/udev", {st_mode=S_IFDIR|0755, st_size=220, ...}) = 0
open("/sys/block/md2014/dev", O_RDONLY) = -1 ENOENT (No such file or directory)
getpid() = 19817
mknod("/dev/.tmp.md.19817:9:2014", S_IFBLK|0600, makedev(9, 2014)) = 0
open("/dev/.tmp.md.19817:9:2014", O_RDWR|O_EXCL|O_DIRECT) = -1 ENXIO
(No such device or address)
unlink("/dev/.tmp.md.19817:9:2014") = 0
getpid() = 19817
mknod("/tmp/.tmp.md.19817:9:2014", S_IFBLK|0600, makedev(9, 2014)) = 0
open("/tmp/.tmp.md.19817:9:2014", O_RDWR|O_EXCL|O_DIRECT) = -1 ENXIO
(No such device or address)
unlink("/tmp/.tmp.md.19817:9:2014") = 0
write(2, "mdadm: unexpected failure openin"..., 46mdadm: unexpected
failure opening /dev/md2014
) = 46
exit_group(1) = ?
+++ exited with 1 +++
root@jowahome:~# dmesg >after
root@jowahome:~# diff before after
On Thu, Aug 31, 2017 at 7:02 AM, Jack Wang <jack.wang.usish@xxxxxxxxx> wrote:
> 2017-08-31 14:06 GMT+02:00 Joel Walberg <joel.walberg@xxxxxxxxx>:
>> ## If you have any ideas or suggestions, I would appreciate it.
>> ##
>> ## ==issue====================================
>> ## ===========================================
>> ## System has 3 hard drives, 1=OS, 2=RAID1 members
>> ## Prior OS: Debian 7
>> ## Installed Debian 9 on OS drive, unable to now get RAID1
>> assembled/started/missing special device files
>> ##
>> ## root@jowahome:~# mdadm -A /dev/md2014 /dev/sdc1 /dev/sdb1
>> ## mdadm: unexpected failure opening /dev/md2014
>> ## root@jowahome:~# mdadm -A /dev/md/md2014 /dev/sdc1 /dev/sdb1
>> ## mdadm: unexpected failure opening /dev/md2014
>> ##
> Can you do strace and share the output, also better share the dmesg
> when it happens?
> The metadata looks fine on both drives.
>
>
> Regards,
> Jack
>
>> ##
>> ## ==output===================================
>> ## ===========================================
>> ## root@jowahome:~# mdadm -E -s
>> ## ARRAY /dev/md/md2014 metadata=1.2
>> UUID=43dbaec6:5b167da8:01bf232d:c218eb6c name=jowahome:md2014
>> ## ==output===================================
>> ## ===========================================
>> ## root@jowahome:~# mdadm -E /dev/sdb1
>> ## /dev/sdb1:
>> ## Magic : a92b4efc
>> ## Version : 1.2
>> ## Feature Map : 0x0
>> ## Array UUID : 43dbaec6:5b167da8:01bf232d:c218eb6c
>> ## Name : jowahome:md2014 (local to host jowahome)
>> ## Creation Time : Thu Dec 4 17:44:01 2014
>> ## Raid Level : raid1
>> ## Raid Devices : 2
>> ##
>> ## Avail Dev Size : 5860268032 (2794.39 GiB 3000.46 GB)
>> ## Array Size : 2930133824 (2794.39 GiB 3000.46 GB)
>> ## Used Dev Size : 5860267648 (2794.39 GiB 3000.46 GB)
>> ## Data Offset : 262144 sectors
>> ## Super Offset : 8 sectors
>> ## Unused Space : before=262064 sectors, after=384 sectors
>> ## State : clean
>> ## Device UUID : 3d78e679:e1ec930a:92f60635:3f8d79b5
>> ##
>> ## Update Time : Wed Aug 30 10:01:33 2017
>> ## Checksum : 83624b92 - correct
>> ## Events : 48385
>> ##
>> ##
>> ## Device Role : Active device 1
>> ## Array State : AA ('A' == active, '.' == missing, 'R' == replacing)
>> ## ==output===================================
>> ## ===========================================
>> ## root@jowahome:~# mdadm -E /dev/sdc1
>> ## /dev/sdc1:
>> ## Magic : a92b4efc
>> ## Version : 1.2
>> ## Feature Map : 0x0
>> ## Array UUID : 43dbaec6:5b167da8:01bf232d:c218eb6c
>> ## Name : jowahome:md2014 (local to host jowahome)
>> ## Creation Time : Thu Dec 4 17:44:01 2014
>> ## Raid Level : raid1
>> ## Raid Devices : 2
>> ##
>> ## Avail Dev Size : 5860268032 (2794.39 GiB 3000.46 GB)
>> ## Array Size : 2930133824 (2794.39 GiB 3000.46 GB)
>> ## Used Dev Size : 5860267648 (2794.39 GiB 3000.46 GB)
>> ## Data Offset : 262144 sectors
>> ## Super Offset : 8 sectors
>> ## Unused Space : before=262064 sectors, after=384 sectors
>> ## State : clean
>> ## Device UUID : ffb6f0de:43aa75a9:3feb8c8e:b7c41993
>> ##
>> ## Update Time : Wed Aug 30 10:01:33 2017
>> ## Checksum : be7473da - correct
>> ## Events : 48385
>> ##
>> ##
>> ## Device Role : Active device 0
>> ## Array State : AA ('A' == active, '.' == missing, 'R' == replacing)
>> ## ==output===================================
>> ## ===========================================
>> ## root@jowahome:~# smartctl --xall /dev/sdb
>> ## smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
>> ## Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>> ##
>> ## === START OF INFORMATION SECTION ===
>> ## Model Family: Seagate Barracuda 7200.14 (AF)
>> ## Device Model: ST3000DM001-1ER166
>> ## Serial Number: Z5009M1W
>> ## LU WWN Device Id: 5 000c50 07903c6be
>> ## Firmware Version: CC43
>> ## User Capacity: 3,000,592,982,016 bytes [3.00 TB]
>> ## Sector Sizes: 512 bytes logical, 4096 bytes physical
>> ## Rotation Rate: 7200 rpm
>> ## Form Factor: 3.5 inches
>> ## Device is: In smartctl database [for details use: -P show]
>> ## ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
>> ## SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
>> ## Local Time is: Thu Aug 31 05:31:38 2017 MDT
>> ## SMART support is: Available - device has SMART capability.
>> ## SMART support is: Enabled
>> ## AAM feature is: Unavailable
>> ## APM level is: 254 (maximum performance)
>> ## Rd look-ahead is: Enabled
>> ## Write cache is: Enabled
>> ## ATA Security is: Disabled, frozen [SEC2]
>> ## Wt Cache Reorder: Unavailable
>> ##
>> ## === START OF READ SMART DATA SECTION ===
>> ## SMART overall-health self-assessment test result: PASSED
>> ##
>> ## General SMART Values:
>> ## Offline data collection status: (0x82) Offline data collection activity
>> ## was completed without error.
>> ## Auto Offline Data
>> Collection: Enabled.
>> ## Self-test execution status: ( 0) The previous self-test
>> routine completed
>> ## without error or no
>> self-test has ever
>> ## been run.
>> ## Total time to complete Offline
>> ## data collection: ( 80) seconds.
>> ## Offline data collection
>> ## capabilities: (0x7b) SMART execute Offline immediate.
>> ## Auto Offline data
>> collection on/off support.
>> ## Suspend Offline collection upon new
>> ## command.
>> ## Offline surface scan supported.
>> ## Self-test supported.
>> ## Conveyance Self-test supported.
>> ## Selective Self-test supported.
>> ## SMART capabilities: (0x0003) Saves SMART data before entering
>> ## power-saving mode.
>> ## Supports SMART auto save timer.
>> ## Error logging capability: (0x01) Error logging supported.
>> ## General Purpose Logging supported.
>> ## Short self-test routine
>> ## recommended polling time: ( 1) minutes.
>> ## Extended self-test routine
>> ## recommended polling time: ( 331) minutes.
>> ## Conveyance self-test routine
>> ## recommended polling time: ( 2) minutes.
>> ## SCT capabilities: (0x1085) SCT Status supported.
>> ##
>> ## SMART Attributes Data Structure revision number: 10
>> ## Vendor Specific SMART Attributes with Thresholds:
>> ## ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
>> ## 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 186165552
>> ## 3 Spin_Up_Time PO---- 094 092 000 - 0
>> ## 4 Start_Stop_Count -O--CK 100 100 020 - 54
>> ## 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
>> ## 7 Seek_Error_Rate POSR-- 070 060 030 - 10955017
>> ## 9 Power_On_Hours -O--CK 075 075 000 - 22641
>> ## 10 Spin_Retry_Count PO--C- 100 100 097 - 0
>> ## 12 Power_Cycle_Count -O--CK 100 100 020 - 54
>> ## 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
>> ## 184 End-to-End_Error -O--CK 100 100 099 - 0
>> ## 187 Reported_Uncorrect -O--CK 100 100 000 - 0
>> ## 188 Command_Timeout -O--CK 100 100 000 - 0 0 0
>> ## 189 High_Fly_Writes -O-RCK 088 088 000 - 12
>> ## 190 Airflow_Temperature_Cel -O---K 062 056 045 - 38
>> (Min/Max 37/42)
>> ## 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
>> ## 192 Power-Off_Retract_Count -O--CK 100 100 000 - 32
>> ## 193 Load_Cycle_Count -O--CK 100 100 000 - 439
>> ## 194 Temperature_Celsius -O---K 038 044 000 - 38 (0 15 0 0 0)
>> ## 197 Current_Pending_Sector -O--C- 100 100 000 - 0
>> ## 198 Offline_Uncorrectable ----C- 100 100 000 - 0
>> ## 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
>> ## 240 Head_Flying_Hours ------ 100 253 000 -
>> 20087h+17m+38.336s
>> ## 241 Total_LBAs_Written ------ 100 253 000 - 40747055745
>> ## 242 Total_LBAs_Read ------ 100 253 000 - 208387242739
>> ## ||||||_ K auto-keep
>> ## |||||__ C event count
>> ## ||||___ R error rate
>> ## |||____ S speed/performance
>> ## ||_____ O updated online
>> ## |______ P prefailure warning
>> ##
>> ## General Purpose Log Directory Version 1
>> ## SMART Log Directory Version 1 [multi-sector log support]
>> ## Address Access R/W Size Description
>> ## 0x00 GPL,SL R/O 1 Log Directory
>> ## 0x01 SL R/O 1 Summary SMART error log
>> ## 0x02 SL R/O 5 Comprehensive SMART error log
>> ## 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
>> ## 0x06 SL R/O 1 SMART self-test log
>> ## 0x07 GPL R/O 1 Extended self-test log
>> ## 0x09 SL R/W 1 Selective self-test log
>> ## 0x10 GPL R/O 1 SATA NCQ Queued Error log
>> ## 0x11 GPL R/O 1 SATA Phy Event Counters log
>> ## 0x21 GPL R/O 1 Write stream error log
>> ## 0x22 GPL R/O 1 Read stream error log
>> ## 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
>> ## 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
>> ## 0xa1 GPL,SL VS 20 Device vendor specific log
>> ## 0xa2 GPL VS 4496 Device vendor specific log
>> ## 0xa8 GPL,SL VS 129 Device vendor specific log
>> ## 0xa9 GPL,SL VS 1 Device vendor specific log
>> ## 0xab GPL VS 1 Device vendor specific log
>> ## 0xb0 GPL VS 5176 Device vendor specific log
>> ## 0xbe-0xbf GPL VS 65535 Device vendor specific log
>> ## 0xc0 GPL,SL VS 1 Device vendor specific log
>> ## 0xc1 GPL,SL VS 10 Device vendor specific log
>> ## 0xc3 GPL,SL VS 8 Device vendor specific log
>> ## 0xc4 GPL,SL VS 5 Device vendor specific log
>> ## 0xe0 GPL,SL R/W 1 SCT Command/Status
>> ## 0xe1 GPL,SL R/W 1 SCT Data Transfer
>> ##
>> ## SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
>> ## No Errors Logged
>> ##
>> ## SMART Extended Self-test Log Version: 1 (1 sectors)
>> ## Num Test_Description Status Remaining
>> LifeTime(hours) LBA_of_first_error
>> ## # 1 Short offline Completed without error 00%
>> 21086 -
>> ##
>> ## SMART Selective self-test log data structure revision number 1
>> ## SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
>> ## 1 0 0 Not_testing
>> ## 2 0 0 Not_testing
>> ## 3 0 0 Not_testing
>> ## 4 0 0 Not_testing
>> ## 5 0 0 Not_testing
>> ## Selective self-test flags (0x0):
>> ## After scanning selected spans, do NOT read-scan remainder of disk.
>> ## If Selective self-test is pending on power-up, resume after 0 minute delay.
>> ##
>> ## SCT Status Version: 3
>> ## SCT Version (vendor specific): 522 (0x020a)
>> ## SCT Support Level: 1
>> ## Device State: Active (0)
>> ## Current Temperature: 38 Celsius
>> ## Power Cycle Min/Max Temperature: 37/41 Celsius
>> ## Lifetime Min/Max Temperature: 15/44 Celsius
>> ## Under/Over Temperature Limit Count: 0/0
>> ##
>> ## SCT Data Table command not supported
>> ##
>> ## SCT Error Recovery Control command not supported
>> ##
>> ## Device Statistics (GP/SMART Log 0x04) not supported
>> ##
>> ## SATA Phy Event Counters (GP Log 0x11)
>> ## ID Size Value Description
>> ## 0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
>> ## 0x0001 2 0 Command failed due to ICRC error
>> ## 0x0003 2 0 R_ERR response for device-to-host data FIS
>> ## 0x0004 2 0 R_ERR response for host-to-device data FIS
>> ## 0x0006 2 0 R_ERR response for device-to-host non-data FIS
>> ## 0x0007 2 0 R_ERR response for host-to-device non-data FIS
>> ##
>> ## ==output===================================
>> ## ===========================================
>> ## root@jowahome:~# smartctl --xall /dev/sdc
>> ## smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-3-amd64] (local build)
>> ## Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
>> ##
>> ## === START OF INFORMATION SECTION ===
>> ## Model Family: Seagate Barracuda 7200.14 (AF)
>> ## Device Model: ST3000DM001-1ER166
>> ## Serial Number: Z5009W5Z
>> ## LU WWN Device Id: 5 000c50 079052344
>> ## Firmware Version: CC43
>> ## User Capacity: 3,000,592,982,016 bytes [3.00 TB]
>> ## Sector Sizes: 512 bytes logical, 4096 bytes physical
>> ## Rotation Rate: 7200 rpm
>> ## Form Factor: 3.5 inches
>> ## Device is: In smartctl database [for details use: -P show]
>> ## ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
>> ## SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
>> ## Local Time is: Thu Aug 31 05:31:41 2017 MDT
>> ## SMART support is: Available - device has SMART capability.
>> ## SMART support is: Enabled
>> ## AAM feature is: Unavailable
>> ## APM level is: 254 (maximum performance)
>> ## Rd look-ahead is: Enabled
>> ## Write cache is: Enabled
>> ## ATA Security is: Disabled, frozen [SEC2]
>> ## Wt Cache Reorder: Unavailable
>> ##
>> ## === START OF READ SMART DATA SECTION ===
>> ## SMART overall-health self-assessment test result: PASSED
>> ##
>> ## General SMART Values:
>> ## Offline data collection status: (0x82) Offline data collection activity
>> ## was completed without error.
>> ## Auto Offline Data
>> Collection: Enabled.
>> ## Self-test execution status: ( 0) The previous self-test
>> routine completed
>> ## without error or no
>> self-test has ever
>> ## been run.
>> ## Total time to complete Offline
>> ## data collection: ( 89) seconds.
>> ## Offline data collection
>> ## capabilities: (0x7b) SMART execute Offline immediate.
>> ## Auto Offline data
>> collection on/off support.
>> ## Suspend Offline collection upon new
>> ## command.
>> ## Offline surface scan supported.
>> ## Self-test supported.
>> ## Conveyance Self-test supported.
>> ## Selective Self-test supported.
>> ## SMART capabilities: (0x0003) Saves SMART data before entering
>> ## power-saving mode.
>> ## Supports SMART auto save timer.
>> ## Error logging capability: (0x01) Error logging supported.
>> ## General Purpose Logging supported.
>> ## Short self-test routine
>> ## recommended polling time: ( 1) minutes.
>> ## Extended self-test routine
>> ## recommended polling time: ( 332) minutes.
>> ## Conveyance self-test routine
>> ## recommended polling time: ( 2) minutes.
>> ## SCT capabilities: (0x1085) SCT Status supported.
>> ##
>> ## SMART Attributes Data Structure revision number: 10
>> ## Vendor Specific SMART Attributes with Thresholds:
>> ## ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
>> ## 1 Raw_Read_Error_Rate POSR-- 119 099 006 - 205036280
>> ## 3 Spin_Up_Time PO---- 094 093 000 - 0
>> ## 4 Start_Stop_Count -O--CK 100 100 020 - 59
>> ## 5 Reallocated_Sector_Ct PO--CK 097 097 010 - 3344
>> ## 7 Seek_Error_Rate POSR-- 070 060 030 - 11270536
>> ## 9 Power_On_Hours -O--CK 075 075 000 - 22632
>> ## 10 Spin_Retry_Count PO--C- 100 100 097 - 0
>> ## 12 Power_Cycle_Count -O--CK 100 100 020 - 60
>> ## 183 Runtime_Bad_Block -O--CK 098 098 000 - 2
>> ## 184 End-to-End_Error -O--CK 100 100 099 - 0
>> ## 187 Reported_Uncorrect -O--CK 100 100 000 - 0
>> ## 188 Command_Timeout -O--CK 100 098 000 - 5 5 5
>> ## 189 High_Fly_Writes -O-RCK 099 099 000 - 1
>> ## 190 Airflow_Temperature_Cel -O---K 057 052 045 - 43
>> (Min/Max 42/46)
>> ## 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
>> ## 192 Power-Off_Retract_Count -O--CK 100 100 000 - 34
>> ## 193 Load_Cycle_Count -O--CK 100 100 000 - 456
>> ## 194 Temperature_Celsius -O---K 043 048 000 - 43 (0 15 0 0 0)
>> ## 197 Current_Pending_Sector -O--C- 100 100 000 - 0
>> ## 198 Offline_Uncorrectable ----C- 100 100 000 - 0
>> ## 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
>> ## 240 Head_Flying_Hours ------ 100 253 000 -
>> 20088h+20m+07.582s
>> ## 241 Total_LBAs_Written ------ 100 253 000 - 24949386363
>> ## 242 Total_LBAs_Read ------ 100 253 000 - 226511888729
>> ## ||||||_ K auto-keep
>> ## |||||__ C event count
>> ## ||||___ R error rate
>> ## |||____ S speed/performance
>> ## ||_____ O updated online
>> ## |______ P prefailure warning
>> ##
>> ## General Purpose Log Directory Version 1
>> ## SMART Log Directory Version 1 [multi-sector log support]
>> ## Address Access R/W Size Description
>> ## 0x00 GPL,SL R/O 1 Log Directory
>> ## 0x01 SL R/O 1 Summary SMART error log
>> ## 0x02 SL R/O 5 Comprehensive SMART error log
>> ## 0x03 GPL R/O 5 Ext. Comprehensive SMART error log
>> ## 0x06 SL R/O 1 SMART self-test log
>> ## 0x07 GPL R/O 1 Extended self-test log
>> ## 0x09 SL R/W 1 Selective self-test log
>> ## 0x10 GPL R/O 1 SATA NCQ Queued Error log
>> ## 0x11 GPL R/O 1 SATA Phy Event Counters log
>> ## 0x21 GPL R/O 1 Write stream error log
>> ## 0x22 GPL R/O 1 Read stream error log
>> ## 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
>> ## 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
>> ## 0xa1 GPL,SL VS 20 Device vendor specific log
>> ## 0xa2 GPL VS 4496 Device vendor specific log
>> ## 0xa8 GPL,SL VS 129 Device vendor specific log
>> ## 0xa9 GPL,SL VS 1 Device vendor specific log
>> ## 0xab GPL VS 1 Device vendor specific log
>> ## 0xb0 GPL VS 5176 Device vendor specific log
>> ## 0xbe-0xbf GPL VS 65535 Device vendor specific log
>> ## 0xc0 GPL,SL VS 1 Device vendor specific log
>> ## 0xc1 GPL,SL VS 10 Device vendor specific log
>> ## 0xc3 GPL,SL VS 8 Device vendor specific log
>> ## 0xc4 GPL,SL VS 5 Device vendor specific log
>> ## 0xe0 GPL,SL R/W 1 SCT Command/Status
>> ## 0xe1 GPL,SL R/W 1 SCT Data Transfer
>> ##
>> ## SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
>> ## No Errors Logged
>> ##
>> ## SMART Extended Self-test Log Version: 1 (1 sectors)
>> ## Num Test_Description Status Remaining
>> LifeTime(hours) LBA_of_first_error
>> ## # 1 Short offline Completed without error 00%
>> 21078 -
>> ##
>> ## SMART Selective self-test log data structure revision number 1
>> ## SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
>> ## 1 0 0 Not_testing
>> ## 2 0 0 Not_testing
>> ## 3 0 0 Not_testing
>> ## 4 0 0 Not_testing
>> ## 5 0 0 Not_testing
>> ## Selective self-test flags (0x0):
>> ## After scanning selected spans, do NOT read-scan remainder of disk.
>> ## If Selective self-test is pending on power-up, resume after 0 minute delay.
>> ##
>> ## SCT Status Version: 3
>> ## SCT Version (vendor specific): 522 (0x020a)
>> ## SCT Support Level: 1
>> ## Device State: Active (0)
>> ## Current Temperature: 42 Celsius
>> ## Power Cycle Min/Max Temperature: 42/46 Celsius
>> ## Lifetime Min/Max Temperature: 15/48 Celsius
>> ## Under/Over Temperature Limit Count: 0/0
>> ##
>> ## SCT Data Table command not supported
>> ##
>> ## SCT Error Recovery Control command not supported
>> ##
>> ## Device Statistics (GP/SMART Log 0x04) not supported
>> ##
>> ## SATA Phy Event Counters (GP Log 0x11)
>> ## ID Size Value Description
>> ## 0x000a 2 18 Device-to-host register FISes sent due to a COMRESET
>> ## 0x0001 2 0 Command failed due to ICRC error
>> ## 0x0003 2 0 R_ERR response for device-to-host data FIS
>> ## 0x0004 2 0 R_ERR response for host-to-device data FIS
>> ## 0x0006 2 0 R_ERR response for device-to-host non-data FIS
>> ## 0x0007 2 0 R_ERR response for host-to-device non-data FIS
>> ##
>> ## ==output===================================
>> ## ===========================================
>> ## root@jowahome:~# mdadm --examine /dev/sdb
>> ## /dev/sdb:
>> ## MBR Magic : aa55
>> ## Partition[0] : 4294967295 sectors at 1 (type ee)
>> ##
>> ## ==output===================================
>> ## ===========================================
>> ## root@jowahome:~# mdadm --examine /dev/sdc
>> ## /dev/sdc:
>> ## MBR Magic : aa55
>> ## Partition[0] : 4294967295 sectors at 1 (type ee)
>> ##
>> ## ==output===================================
>> ## ===========================================
>> ## root@jowahome:~/lsdrv# ./lsdrv
>> ## **Warning** The following utility(ies) failed to execute:
>> ## sginfo
>> ## Some information may be missing.
>> ##
>> ## PCI [ata_piix] 00:1f.2 IDE interface: Intel Corporation 7
>> Series/C210 Series Chipset Family 4-port SATA Controller [IDE mode]
>> (rev 04)
>> ## ├scsi 0:0:0:0 ATA WDC WD20EARX-00P {WD-WCAZAA923311}
>> ## │└sda 1.82t [8:0] Partitioned (dos)
>> ## │ ├sda1 1.79t [8:1] ext4 {f714c162-9d48-48d1-9b25-34c7a36d0ae5}
>> ## │ │└Mounted as /dev/sda1 @ /
>> ## │ ├sda2 1.00k [8:2] Partitioned (dos)
>> ## │ └sda5 31.78g [8:5] swap {e3367b07-46bf-4903-871f-83f6b8d6d823}
>> ## ├scsi 0:0:1:0 ATA ST3000DM001-1ER1 {Z5009M1W}
>> ## │└sdb 2.73t [8:16] Partitioned (gpt)
>> ## │ └sdb1 2.73t [8:17] MD raid1 (2) inactive 'jowahome:md2014'
>> {43dbaec6-5b16-7da8-01bf-232dc218eb6c}
>> ## └scsi 1:0:1:0 ATA ST3000DM001-1ER1 {Z5009W5Z}
>> ## └sdc 2.73t [8:32] Partitioned (gpt)
>> ## └sdc1 2.73t [8:33] MD raid1 (2) inactive 'jowahome:md2014'
>> {43dbaec6-5b16-7da8-01bf-232dc218eb6c}
>> ## PCI [ata_piix] 00:1f.5 IDE interface: Intel Corporation 7
>> Series/C210 Series Chipset Family 2-port SATA Controller [IDE mode]
>> (rev 04)
>> ## ├scsi 2:x:x:x [Empty]
>> ## └scsi 3:0:0:0 ATAPI DVD A DH24ACSH {2A8215504489}
>> ## └sr0 1.00g [11:0] Empty/Unknown
>> ## USB [usb-storage] Bus 001 Device 003: ID 058f:6362 Alcor Micro
>> Corp. Flash Card Reader/Writer {058F63626420}
>> ## ├scsi 4:0:0:0 Generic- SD/MMC
>> ## │└sdd 0.00k [8:48] Empty/Unknown
>> ## ├scsi 4:0:0:1 Generic- Compact Flash
>> ## │└sde 0.00k [8:64] Empty/Unknown
>> ## ├scsi 4:0:0:2 Generic- SM/xD Picture
>> ## │└sdf 0.00k [8:80] Empty/Unknown
>> ## └scsi 4:0:0:3 Generic- MS/MS-Pro
>> ## └sdg 0.00k [8:96] Empty/Unknown
>> ##
>> ## ==output===================================
>> ## ===========================================
>> ## root@jowahome:~/lsdrv# cat /proc/mdstat
>> ## Personalities : [linear] [multipath] [raid0] [raid1] [raid6]
>> [raid5] [raid4] [raid10]
>> ## unused devices: <none>
>> ##
>> ## ==output===================================
>> ## ===========================================
>> ##
>>
>>
>> --
>>
>> ___________________________
>> Joel A. Walberg
>> joel.walberg@xxxxxxxxx
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
___________________________
Joel A. Walberg
joel.walberg@xxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
