Here are the smart reports for all six drives. drive sda was not co-operating...
/dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.2.0-27-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: /2:0:0:0
Product:
User Capacity: 600,332,565,813,390,450 bytes [600 PB]
Logical block size: 774843950 bytes
>> Terminate command early due to bad response to IEC mode page
=== START OF READ SMART DATA SECTION ===
Error Counter logging not supported
Device does not support Self Test logging
/dev/sdb
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.2.0-27-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-9YN162
Serial Number: Z1D05TKG
LU WWN Device Id: 5 000c50 03ec23134
Firmware Version: CC9C
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Jul 7 18:58:22 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 116) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3081) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail
Always - 205143226
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 152
5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail
Always - 7808
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail
Always - 4573741014
9 Power_On_Hours 0x0032 067 067 000 Old_age
Always - 29429
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 151
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age
Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age
Always - 4 5 5
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 069 035 045 Old_age
Always In_the_past 31 (0 101 31 30 0)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 149
193 Load_Cycle_Count 0x0032 087 087 000 Old_age
Always - 26214
194 Temperature_Celsius 0x0022 031 065 000 Old_age
Always - 31 (0 14 0 0 0)
197 Current_Pending_Sector 0x0012 080 080 000 Old_age
Always - 3359
198 Offline_Uncorrectable 0x0010 080 080 000 Old_age
Offline - 3359
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 15576h+39m+12.722s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 42665052319107
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 234087115868324
SMART Error Log Version: 1
ATA Error Count: 342 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 342 occurred at disk power-on lifetime: 29429 hours (1226 days + 5 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 09 f8 0e 00 Error: UNC at LBA = 0x000ef809 = 981001
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 08 f8 0e 40 00 02:57:13.845 READ FPDMA QUEUED
60 00 08 00 f8 0e 40 00 02:57:13.845 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 02:57:13.844 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 02:57:13.844 READ FPDMA QUEUED
b0 da 00 00 4f c2 00 00 02:49:00.670 SMART RETURN STATUS
Error 341 occurred at disk power-on lifetime: 29429 hours (1226 days + 5 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 09 f8 0e 00 Error: UNC at LBA = 0x000ef809 = 981001
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 08 f8 0e 40 00 02:57:13.845 READ FPDMA QUEUED
60 00 08 00 f8 0e 40 00 02:57:13.845 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 02:57:13.844 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 02:57:13.844 READ FPDMA QUEUED
b0 da 00 00 4f c2 00 00 02:49:00.670 SMART RETURN STATUS
Error 340 occurred at disk power-on lifetime: 29428 hours (1226 days + 4 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 09 f8 0e 00 Error: UNC at LBA = 0x000ef809 = 981001
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 08 f8 0e 40 00 01:36:54.470 READ FPDMA QUEUED
60 00 08 00 f8 0e 40 00 01:36:54.470 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 01:36:54.470 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 01:36:54.469 READ FPDMA QUEUED
60 00 08 08 10 00 40 00 01:36:12.430 READ FPDMA QUEUED
Error 339 occurred at disk power-on lifetime: 29428 hours (1226 days + 4 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 09 f8 0e 00 Error: UNC at LBA = 0x000ef809 = 981001
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 08 f8 0e 40 00 01:36:54.470 READ FPDMA QUEUED
60 00 08 00 f8 0e 40 00 01:36:54.470 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 01:36:54.470 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 01:36:54.469 READ FPDMA QUEUED
60 00 08 08 10 00 40 00 01:36:12.430 READ FPDMA QUEUED
Error 338 occurred at disk power-on lifetime: 29427 hours (1226 days + 3 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 09 f8 0e 00 Error: UNC at LBA = 0x000ef809 = 981001
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 08 f8 0e 40 00 01:28:40.063 READ FPDMA QUEUED
60 00 08 08 00 00 40 00 01:28:37.685 READ FPDMA QUEUED
60 00 08 08 08 00 40 00 01:28:37.685 READ FPDMA QUEUED
60 00 08 08 10 00 40 00 01:28:37.684 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 01:28:37.684 SET FEATURES [Enable SATA feature]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
/dev/sdc
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.2.0-27-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation ES (SATA 6Gb/s)
Device Model: ST1000NM0011
Serial Number: Z1N4DQG8
LU WWN Device Id: 5 000c50 064169d91
Firmware Version: SN03
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7202 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Jul 7 18:58:31 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 149) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 069 064 044 Pre-fail
Always - 10352612
3 Spin_Up_Time 0x0003 096 096 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 21
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail
Always - 129759408
9 Power_On_Hours 0x0032 080 080 000 Old_age
Always - 17545
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 21
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age
Always - 3
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 069 062 045 Old_age
Always - 31 (Min/Max 30/31)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 16
193 Load_Cycle_Count 0x0032 096 096 000 Old_age
Always - 9383
194 Temperature_Celsius 0x0022 031 040 000 Old_age
Always - 31 (0 14 0 0 0)
195 Hardware_ECC_Recovered 0x001a 105 100 000 Old_age
Always - 10352612
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age
Always - 66
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
/dev/sdc
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.2.0-27-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation ES (SATA 6Gb/s)
Device Model: ST1000NM0011
Serial Number: Z1N4DQG8
LU WWN Device Id: 5 000c50 064169d91
Firmware Version: SN03
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7202 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Jul 7 18:58:31 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 149) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 069 064 044 Pre-fail
Always - 10352612
3 Spin_Up_Time 0x0003 096 096 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 21
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail
Always - 129759408
9 Power_On_Hours 0x0032 080 080 000 Old_age
Always - 17545
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 21
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age
Always - 3
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 069 062 045 Old_age
Always - 31 (Min/Max 30/31)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 16
193 Load_Cycle_Count 0x0032 096 096 000 Old_age
Always - 9383
194 Temperature_Celsius 0x0022 031 040 000 Old_age
Always - 31 (0 14 0 0 0)
195 Hardware_ECC_Recovered 0x001a 105 100 000 Old_age
Always - 10352612
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age
Always - 66
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
/dev/sdd
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.2.0-27-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Constellation ES (SATA 6Gb/s)
Device Model: ST1000NM0011
Serial Number: Z1N4DX3G
LU WWN Device Id: 5 000c50 06416d153
Firmware Version: SN03
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7202 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Jul 7 18:58:38 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 153) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10bd) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 078 063 044 Pre-fail
Always - 59676424
3 Spin_Up_Time 0x0003 096 094 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 64
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail
Always - 202527202
9 Power_On_Hours 0x0032 074 074 000 Old_age
Always - 23267
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 60
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age
Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 067 032 045 Old_age
Always In_the_past 33 (0 111 33 31 0)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 51
193 Load_Cycle_Count 0x0032 095 095 000 Old_age
Always - 10161
194 Temperature_Celsius 0x0022 033 068 000 Old_age
Always - 33 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 114 099 000 Old_age
Always - 59676424
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 478 -
# 2 Extended offline Aborted by host 80% 462 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
/dev/sde
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.2.0-27-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1CH162
Serial Number: S1D8EGH8
LU WWN Device Id: 5 000c50 05c135595
Firmware Version: CC46
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Jul 7 18:58:46 2016 UTC
==> WARNING: A firmware update for this drive is available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail
Always - 203719328
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 122
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail
Always - 156895542
9 Power_On_Hours 0x0032 068 068 000 Old_age
Always - 28487
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 121
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age
Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age
Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age
Always - 0 0 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 071 033 045 Old_age
Always In_the_past 29 (0 200 29 27 0)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 119
193 Load_Cycle_Count 0x0032 095 095 000 Old_age
Always - 11202
194 Temperature_Celsius 0x0022 029 067 000 Old_age
Always - 29 (0 11 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 27611h+29m+28.145s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 10984310419
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 42457231761
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
/dev/sdf
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.2.0-27-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-9YN162
Serial Number: Z1D04N3L
LU WWN Device Id: 5 000c50 03633f4d6
Firmware Version: CC9C
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Jul 7 18:58:53 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3081) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 089 087 006 Pre-fail
Always - 107847548
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 148
5 Reallocated_Sector_Ct 0x0033 072 051 036 Pre-fail
Always - 37616
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail
Always - 235958313
9 Power_On_Hours 0x0032 066 066 000 Old_age
Always - 30474
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age
Always - 147
183 Runtime_Bad_Block 0x0032 098 098 000 Old_age
Always - 2
184 End-to-End_Error 0x0032 100 100 099 Old_age
Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age
Always - 587
188 Command_Timeout 0x0032 100 098 000 Old_age
Always - 13 13 13
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 069 034 045 Old_age
Always In_the_past 31 (0 102 31 29 0)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 145
193 Load_Cycle_Count 0x0032 088 088 000 Old_age
Always - 24193
194 Temperature_Celsius 0x0022 031 066 000 Old_age
Always - 31 (0 13 0 0 0)
197 Current_Pending_Sector 0x0012 001 001 000 Old_age
Always - 33664
198 Offline_Uncorrectable 0x0010 001 001 000 Old_age
Offline - 33664
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age
Offline - 29478h+42m+45.934s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age
Offline - 35126025198006
242 Total_LBAs_Read 0x0000 100 253 000 Old_age
Offline - 233821549666301
SMART Error Log Version: 1
ATA Error Count: 561 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 561 occurred at disk power-on lifetime: 28893 hours (1203 days + 21 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 12d+01:32:01.326 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 12d+01:32:01.325 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 12d+01:32:01.325 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 12d+01:32:01.325 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 12d+01:32:01.325 READ FPDMA QUEUED
Error 560 occurred at disk power-on lifetime: 28893 hours (1203 days + 21 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 12d+01:31:16.334 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+01:31:15.803 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+01:31:13.683 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+01:31:13.683 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 12d+01:31:13.683 WRITE FPDMA QUEUED
Error 559 occurred at disk power-on lifetime: 28893 hours (1203 days + 21 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 12d+01:31:10.402 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+01:31:07.982 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+01:31:07.982 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 12d+01:31:07.982 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 12d+01:31:07.922 SET FEATURES [Enable SATA feature]
Error 558 occurred at disk power-on lifetime: 28893 hours (1203 days + 21 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 12d+01:31:04.755 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+01:31:04.755 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 12d+01:31:04.755 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 12d+01:31:04.694 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 12d+01:31:04.694 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
Error 557 occurred at disk power-on lifetime: 28893 hours (1203 days + 21 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 12d+01:31:01.457 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 12d+01:31:01.457 READ FPDMA QUEUED
61 00 08 ff ff ff 4f 00 12d+01:31:01.457 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 12d+01:31:01.444 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 12d+01:31:01.444 READ NATIVE MAX ADDRESS
EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Amit Biswas
Lab Manager
CSE Department
NYU Tandon School Of Engineering
Office: 1-646-997-3023
On Tue, Jul 19, 2016 at 3:57 PM, Wols Lists <antlists@xxxxxxxxxxxxxxx> wrote:
> Another bit of useful information - can you post the output of smartctl
> on all your drives?
>
> smartctl -x /dev/sd[a,b,c...]
>
> Seeing as the drives are Seagate 1TB drives, I suspect they do support
> ERC and timeout mismatch is not the problem, but this will tell us.
>
> I'll let others chime in with recovery info, but this information will
> definitely help them.
>
> Cheers,
> Wol
>
> On 19/07/16 17:29, Amit Biswas wrote:
>> Greetings!
>>
>> Backup server was acting up and the issue was the drives (all of them)
>> :( Could use some guidance or verdict.
>>
>> It has a total of 6 drives: sda,b,c,d,e,f. From the superblock info
>> (attached), there is a raid 1, and a raid 10 volume. Problem is all
>> the disks are part of both raid volumes (according to superblock).
>>
>> I am currently booted into an ubuntu live disk shell.
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
