On 12/10/2013 09:52 AM, Robin Hill wrote: >> Dec 8 14:30:01 c2RAID6 mdadm[1838]: RebuildStarted event detected on >> md device /dev/md/3 >> Dec 8 15:03:21 c2RAID6 mdadm[1838]: Rebuild26 event detected on md >> device /dev/md/3 >> Dec 8 15:36:41 c2RAID6 mdadm[1838]: Rebuild49 event detected on md >> device /dev/md/3 >> Dec 8 16:10:01 c2RAID6 mdadm[1838]: Rebuild70 event detected on md >> device /dev/md/3 >> Dec 8 16:43:21 c2RAID6 mdadm[1838]: Rebuild87 event detected on md >> device /dev/md/3 >> > > They're perfectly normal if you're doing a repair - I don't think they > should be there for a check though. It's just mdadm in monitor mode > reporting the progress (the numbers are the percentage completed) to > syslog. According to the manual the default reporting interval is 20 > percent, but I think it actually triggers on a completed stripe (or > block of stripes) so the numbers aren't exactly on the interval. I see them as well during checks. Although I can't find documentation stating so I regard them as normal. -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
