On Tue, Feb 12, 2013 at 6:25 AM, Arun Khan <knura9@xxxxxxxxx> wrote: > I used 'watch cat /proc/mdstat' to watch the rebuild progress and the > progress bar showed completion (100%) mark. > When I broke out of this session and thereafter did 'cat /proc/mdstat' > I noticed that not only was /dev/sdb1 not added but /dev/sdc1 was > also not part of the array anymore. With two failed devices, > /dev/md0 was still working mounted on /mnt/md0. > have you tried adding the --force option to assemble? I would leave out sdb since its an empty drive. If that brings it online you can try a read-only fsck with -n to check the consistency of your data. -- Dave Cundiff System Administrator A2Hosting, Inc http://www.a2hosting.com -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
