Re: raid1 issue after disk failure: both disks of the array are still active

[Niccolò Belli <darkbasic@xxxxxxxxxxxxxxx>]

I also would like to know if the raid1 will *surely* use data from the 
other disk to write on the broken sector after a CHECK. I mean, i did 
nothing even after a read error on md0 with a "failed command: READ DMA" 
in dmesg (possibly because after a few reads it succeeded reading?). I 
read that when raid1 is in doubt there is a 50%-50% chance it uses data 
from the good disk, wouldn't be better to fail the broken disk and then 
re-add it to the array?

Cheers,
Niccolò
--
http://www.linuxsystems.it
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html