Hi,
I have a raid1 array with two disks, distro is Squeeze amd64. /dev/sda
is slowly dying, here is a snippet of "smartctl -a /dev/sda":
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 2
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline
- 1
The bad sector is in the second half-MB of the disk, in fact with "dd
if=/dev/sda1 of=/dev/null bs=524228 count=1 skip=1" I get this output in
/var/log/syslog:
root@asterisk:~# dd if=/dev/sda1 of=/dev/null bs=524228 count=1 skip=1
0+1 record dentro
0+1 record fuori
430140 byte (430 kB) copiati, 11,7265 s, 36,7 kB/s
Sep 12 22:15:02 asterisk kernel: [ 8921.561978] dd: sending ioctl
80306d02 to a partition!
Sep 12 22:15:02 asterisk kernel: [ 8921.561986] dd: sending ioctl
80306d02 to a partition!
Sep 12 22:15:03 asterisk kernel: [ 8922.529099] ata3.00: exception Emask
0x0 SAct 0x0 SErr 0x0 action 0x0
Sep 12 22:15:03 asterisk kernel: [ 8922.531774] ata3.00: BMDMA stat 0x44
Sep 12 22:15:03 asterisk kernel: [ 8922.533547] ata3.00: failed command:
READ DMA
Sep 12 22:15:03 asterisk kernel: [ 8922.535313] ata3.00: cmd
c8/00:08:48:0f:00/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep 12 22:15:03 asterisk kernel: [ 8922.535316] res
51/40:00:48:0f:00/40:00:00:00:00/e0 Emask 0x9 (media error)
Sep 12 22:15:03 asterisk kernel: [ 8922.538891] ata3.00: status: { DRDY
ERR }
Sep 12 22:15:03 asterisk kernel: [ 8922.540675] ata3.00: error: { UNC }
Sep 12 22:15:04 asterisk kernel: [ 8923.508206] ata3.00: configured for
UDMA/133
Sep 12 22:15:04 asterisk kernel: [ 8923.508220] ata3: EH complete
Sep 12 22:15:05 asterisk kernel: [ 8924.469512] ata3.00: exception Emask
0x0 SAct 0x0 SErr 0x0 action 0x0
Sep 12 22:15:05 asterisk kernel: [ 8924.472323] ata3.00: BMDMA stat 0x44
Sep 12 22:15:05 asterisk kernel: [ 8924.475260] ata3.00: failed command:
READ DMA
Sep 12 22:15:05 asterisk kernel: [ 8924.477023] ata3.00: cmd
c8/00:08:48:0f:00/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep 12 22:15:05 asterisk kernel: [ 8924.477025] res
51/40:00:48:0f:00/40:00:00:00:00/e0 Emask 0x9 (media error)
Sep 12 22:15:05 asterisk kernel: [ 8924.480595] ata3.00: status: { DRDY
ERR }
Sep 12 22:15:05 asterisk kernel: [ 8924.482370] ata3.00: error: { UNC }
Sep 12 22:15:06 asterisk kernel: [ 8925.452209] ata3.00: configured for
UDMA/133
Sep 12 22:15:06 asterisk kernel: [ 8925.452224] ata3: EH complete
Sep 12 22:15:07 asterisk kernel: [ 8926.418504] ata3.00: exception Emask
0x0 SAct 0x0 SErr 0x0 action 0x0
Sep 12 22:15:07 asterisk kernel: [ 8926.420741] ata3.00: BMDMA stat 0x44
Sep 12 22:15:07 asterisk kernel: [ 8926.422486] ata3.00: failed command:
READ DMA
Sep 12 22:15:07 asterisk kernel: [ 8926.424279] ata3.00: cmd
c8/00:08:48:0f:00/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep 12 22:15:07 asterisk kernel: [ 8926.424281] res
51/40:00:48:0f:00/40:00:00:00:00/e0 Emask 0x9 (media error)
Sep 12 22:15:07 asterisk kernel: [ 8926.427861] ata3.00: status: { DRDY
ERR }
Sep 12 22:15:07 asterisk kernel: [ 8926.429660] ata3.00: error: { UNC }
Sep 12 22:15:08 asterisk kernel: [ 8927.396270] ata3.00: configured for
UDMA/133
Sep 12 22:15:08 asterisk kernel: [ 8927.396285] ata3: EH complete
Sep 12 22:15:09 asterisk kernel: [ 8928.359173] ata3.00: exception Emask
0x0 SAct 0x0 SErr 0x0 action 0x0
Sep 12 22:15:09 asterisk kernel: [ 8928.361647] ata3.00: BMDMA stat 0x44
Sep 12 22:15:09 asterisk kernel: [ 8928.364273] ata3.00: failed command:
READ DMA
Sep 12 22:15:09 asterisk kernel: [ 8928.366028] ata3.00: cmd
c8/00:08:48:0f:00/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep 12 22:15:09 asterisk kernel: [ 8928.366030] res
51/40:00:48:0f:00/40:00:00:00:00/e0 Emask 0x9 (media error)
Sep 12 22:15:09 asterisk kernel: [ 8928.369643] ata3.00: status: { DRDY
ERR }
Sep 12 22:15:09 asterisk kernel: [ 8928.371420] ata3.00: error: { UNC }
Sep 12 22:15:10 asterisk kernel: [ 8929.340218] ata3.00: configured for
UDMA/133
Sep 12 22:15:10 asterisk kernel: [ 8929.340233] ata3: EH complete
Sep 12 22:15:11 asterisk kernel: [ 8930.332648] ata3.00: exception Emask
0x0 SAct 0x0 SErr 0x0 action 0x0
Sep 12 22:15:11 asterisk kernel: [ 8930.334453] ata3.00: BMDMA stat 0x44
Sep 12 22:15:11 asterisk kernel: [ 8930.336245] ata3.00: failed command:
READ DMA
Sep 12 22:15:11 asterisk kernel: [ 8930.337995] ata3.00: cmd
c8/00:08:48:0f:00/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep 12 22:15:11 asterisk kernel: [ 8930.337998] res
51/40:00:48:0f:00/40:00:00:00:00/e0 Emask 0x9 (media error)
Sep 12 22:15:11 asterisk kernel: [ 8930.341583] ata3.00: status: { DRDY
ERR }
Sep 12 22:15:11 asterisk kernel: [ 8930.343360] ata3.00: error: { UNC }
Sep 12 22:15:12 asterisk kernel: [ 8931.344205] ata3.00: configured for
UDMA/133
Sep 12 22:15:12 asterisk kernel: [ 8931.344220] ata3: EH complete
Sep 12 22:15:13 asterisk kernel: [ 8932.306376] ata3.00: exception Emask
0x0 SAct 0x0 SErr 0x0 action 0x0
Sep 12 22:15:13 asterisk kernel: [ 8932.308201] ata3.00: BMDMA stat 0x44
Sep 12 22:15:13 asterisk kernel: [ 8932.309948] ata3.00: failed command:
READ DMA
Sep 12 22:15:13 asterisk kernel: [ 8932.311695] ata3.00: cmd
c8/00:08:48:0f:00/00:00:00:00:00/e0 tag 0 dma 4096 in
Sep 12 22:15:13 asterisk kernel: [ 8932.311697] res
51/40:00:48:0f:00/40:00:00:00:00/e0 Emask 0x9 (media error)
Sep 12 22:15:13 asterisk kernel: [ 8932.315262] ata3.00: status: { DRDY
ERR }
Sep 12 22:15:13 asterisk kernel: [ 8932.317070] ata3.00: error: { UNC }
Sep 12 22:15:14 asterisk kernel: [ 8933.284204] ata3.00: configured for
UDMA/133
Sep 12 22:15:14 asterisk kernel: [ 8933.284234] sd 2:0:0:0: [sda]
Unhandled sense code
Sep 12 22:15:14 asterisk kernel: [ 8933.284237] sd 2:0:0:0: [sda]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Sep 12 22:15:14 asterisk kernel: [ 8933.284241] sd 2:0:0:0: [sda] Sense
Key : Medium Error [current] [descriptor]
Sep 12 22:15:14 asterisk kernel: [ 8933.284246] Descriptor sense data
with sense descriptors (in hex):
Sep 12 22:15:14 asterisk kernel: [ 8933.284248] 72 03 11 04 00
00 00 0c 00 0a 80 00 00 00 00 00
Sep 12 22:15:14 asterisk kernel: [ 8933.284256] 00 00 0f 48
Sep 12 22:15:14 asterisk kernel: [ 8933.284260] sd 2:0:0:0: [sda] Add.
Sense: Unrecovered read error - auto reallocate failed
Sep 12 22:15:14 asterisk kernel: [ 8933.284267] sd 2:0:0:0: [sda] CDB:
Read(10): 28 00 00 00 0f 48 00 00 08 00
Sep 12 22:15:14 asterisk kernel: [ 8933.284274] end_request: I/O error,
dev sda, sector 3912
Sep 12 22:15:14 asterisk kernel: [ 8933.286065] Buffer I/O error on
device sda1, logical block 233
Sep 12 22:15:14 asterisk kernel: [ 8933.287889] ata3: EH complete
*Why doesn't it fail the first hard disk of the array!!??*
root@asterisk:~# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sda2[0] sdb2[1]
949236 blocks super 1.2 [2/2] [UU]
md0 : active raid1 sda1[0] sdb1[1]
311619448 blocks super 1.2 [2/2] [UU]
unused devices: <none>
root@asterisk:~# mdadm --detail /dev/md0
/dev/md0:
Version : 1.2
Creation Time : Fri Jun 15 22:45:13 2012
Raid Level : raid1
Array Size : 311619448 (297.18 GiB 319.10 GB)
Used Dev Size : 311619448 (297.18 GiB 319.10 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Wed Sep 12 22:07:58 2012
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : asterisk:0 (local to host asterisk)
UUID : cea0c4c3:181e2ee3:e4d1f3c0:1008ea62
Events : 68
Number Major Minor RaidDevice State
0 8 1 0 active sync /dev/sda1
1 8 17 1 active sync /dev/sdb1
As you can see the firmware of the hard disk reports a read error and
linux still doesn't fail the drive: this is the best way to corrupt data
As far as I know it should fail the bad drive or at least try to resync
it allowing the firmware to reallocate the bad sectors on write.
I really want to understand how raid1 is expected to work, I simply
cannot trust something like this. I'd like to take advantage of the
failure to learn something about linux's raid1 behavior.
Thanks,
Niccolò
More info about the failed disk:
root@asterisk:~# smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-2-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint F1 DT
Device Model: SAMSUNG HD322HJ
Serial Number: S17AJDWQ402689
LU WWN Device Id: 5 0000f0 003046298
Firmware Version: 1AC01110
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Wed Sep 12 22:27:56 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 114) The previous self-test completed
having
the read element of the test
failed.
Total time to complete Offline
data collection: ( 3888) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 66) minutes.
Conveyance self-test routine
recommended polling time: ( 8) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control
supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 099 099 051 Pre-fail Always
- 428
3 Spin_Up_Time 0x0007 094 094 011 Pre-fail Always
- 2810
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always
- 1077
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail
Offline - 9666
9 Power_On_Hours 0x0032 098 098 000 Old_age Always
- 8915
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always
- 1077
13 Read_Soft_Error_Rate 0x000e 099 099 000 Old_age Always
- 400
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always
- 0
184 End-to-End_Error 0x0033 100 100 099 Pre-fail Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 400
188 Command_Timeout 0x0032 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 063 055 000 Old_age Always
- 37 (Min/Max 28/45)
194 Temperature_Celsius 0x0022 063 054 000 Old_age Always
- 37 (Min/Max 28/46)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 355155576
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 2
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline
- 1
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 096 096 000 Old_age Always
- 361
SMART Error Log Version: 1
ATA Error Count: 173 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 173 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 48 0f 00 e0 Error: UNC at LBA = 0x00000f48 = 3912
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 48 0f 00 e0 08 18d+09:02:03.824 READ DMA
ec 00 00 00 00 00 a0 08 18d+09:02:03.814 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 18d+09:02:03.814 SET FEATURES [Set transfer
mode]
ec 00 00 00 00 00 a0 08 18d+09:02:02.824 IDENTIFY DEVICE
Error 172 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 48 0f 00 e0 Error: UNC at LBA = 0x00000f48 = 3912
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 48 0f 00 e0 08 18d+09:02:01.814 READ DMA
ec 00 00 00 00 00 a0 08 18d+09:02:01.804 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 18d+09:02:01.804 SET FEATURES [Set transfer
mode]
ec 00 00 00 00 00 a0 08 18d+09:02:00.854 IDENTIFY DEVICE
Error 171 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 48 0f 00 e0 Error: UNC at LBA = 0x00000f48 = 3912
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 48 0f 00 e0 08 18d+09:01:59.874 READ DMA
ec 00 00 00 00 00 a0 08 18d+09:01:59.864 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 18d+09:01:59.864 SET FEATURES [Set transfer
mode]
ec 00 00 00 00 00 a0 08 18d+09:01:58.904 IDENTIFY DEVICE
Error 170 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 48 0f 00 e0 Error: UNC at LBA = 0x00000f48 = 3912
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 48 0f 00 e0 08 18d+09:01:57.924 READ DMA
ec 00 00 00 00 00 a0 08 18d+09:01:57.924 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 18d+09:01:57.924 SET FEATURES [Set transfer
mode]
ec 00 00 00 00 00 a0 08 18d+09:01:56.964 IDENTIFY DEVICE
Error 169 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 48 0f 00 e0 Error: UNC at LBA = 0x00000f48 = 3912
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 48 0f 00 e0 08 18d+09:01:55.984 READ DMA
ec 00 00 00 00 00 a0 08 18d+09:01:55.974 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 18d+09:01:55.974 SET FEATURES [Set transfer
mode]
ec 00 00 00 00 00 a0 08 18d+09:01:55.014 IDENTIFY DEVICE
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision
number = 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 20% 8895
3912
# 2 Short offline Aborted by host 20% 8871 -
# 3 Short offline Aborted by host 20% 8847 -
# 4 Short offline Aborted by host 20% 8823 -
# 5 Extended offline Aborted by host 90% 8800 -
# 6 Short offline Aborted by host 20% 8799 -
# 7 Short offline Aborted by host 20% 8775 -
# 8 Short offline Aborted by host 20% 8751 -
# 9 Short offline Aborted by host 20% 8727 -
#10 Short offline Aborted by host 20% 8703 -
#11 Short offline Aborted by host 20% 8679 -
#12 Short offline Aborted by host 20% 8655 -
#13 Extended offline Aborted by host 90% 8632 -
#14 Short offline Aborted by host 20% 8631 -
#15 Short offline Aborted by host 20% 8607 -
#16 Short offline Aborted by host 20% 8583 -
#17 Short offline Aborted by host 20% 8559 -
#18 Short offline Aborted by host 20% 8535 -
#19 Short offline Aborted by host 20% 8511 -
#20 Short offline Aborted by host 20% 8487 -
#21 Extended offline Aborted by host 90% 8464 -
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever
been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
http://www.linuxsystems.it
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
