Re: raid1 issue after disk failure: both disks of the array are still active

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> "check" records errors, no action is taken by the md driver to correct it, although the disk firmware itself may try reallocation. So far, that appears to not be the case.
>
> "repair" causes the md driver to write correct data (from copy or reconstructed from parity), which should force the disk firmware to reallocate the affected LBAs from bad physical sectors to good ones.
>
> It seems in this case "repair" is indicated.
>
Or replace the bad disk =)


-- 
Roberto Spadim
Spadim Technology / SPAEmpresarial
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux