Sorry, I hit the wrong button.On Thu, 21 Jun 2012 22:44:10 +0000, Ramon Hofer wrote: > Is it possible to start md1 again to be able to start the linear array > md0 so that I can accesss the data? Stan will probably be angry with me but I did the following: I found the recovery page in your wiki: https://raid.wiki.kernel.org/index.php/RAID_Recovery So I followed the process there. This is what I did: ~$ mdadm --examine /dev/sd[abcd] > raid.status.md1 ~$ mdadm --create --assume-clean -c 128 --level=5 --raid-devices=4 /dev/ md1 /dev/sda /dev/sdb /dev/sdc /dev/sdd It was up and clean. ~$ mdadm --examine /dev/md[12] > raid.status.md0 ~$ mdadm -C --assume-clean -n2 -l linear /dev/md0 /dev/md[12] Now I could mount md0 and all my data is still there :-D Thanks for this great wiki page! Best regards Ramon -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
