Adding these three fields will allow more common code to be moved
to handle_stripe()
Signed-off-by: NeilBrown <neilb@xxxxxxx>
---
drivers/md/raid5.c | 54 +++++++++++++++++++++++-----------------------------
drivers/md/raid5.h | 4 ++++
2 files changed, 28 insertions(+), 30 deletions(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c32ffb5..3327e82 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3003,12 +3003,9 @@ static void handle_stripe5(struct stripe_head *sh)
{
raid5_conf_t *conf = sh->raid_conf;
int disks = sh->disks, i;
- struct bio *return_bi = NULL;
struct stripe_head_state s;
struct r5dev *dev;
- mdk_rdev_t *blocked_rdev = NULL;
int prexor;
- int dec_preread_active = 0;
memset(&s, 0, sizeof(s));
pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d check:%d "
@@ -3058,9 +3055,9 @@ static void handle_stripe5(struct stripe_head *sh)
if (dev->written)
s.written++;
rdev = rcu_dereference(conf->disks[i].rdev);
- if (blocked_rdev == NULL &&
+ if (s.blocked_rdev == NULL &&
rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
- blocked_rdev = rdev;
+ s.blocked_rdev = rdev;
atomic_inc(&rdev->nr_pending);
}
clear_bit(R5_Insync, &dev->flags);
@@ -3088,15 +3085,15 @@ static void handle_stripe5(struct stripe_head *sh)
spin_unlock_irq(&conf->device_lock);
rcu_read_unlock();
- if (unlikely(blocked_rdev)) {
+ if (unlikely(s.blocked_rdev)) {
if (s.syncing || s.expanding || s.expanded ||
s.to_write || s.written) {
set_bit(STRIPE_HANDLE, &sh->state);
goto unlock;
}
/* There is nothing for the blocked_rdev to block */
- rdev_dec_pending(blocked_rdev, conf->mddev);
- blocked_rdev = NULL;
+ rdev_dec_pending(s.blocked_rdev, conf->mddev);
+ s.blocked_rdev = NULL;
}
if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
@@ -3112,7 +3109,7 @@ static void handle_stripe5(struct stripe_head *sh)
* need to be failed
*/
if (s.failed > 1 && s.to_read+s.to_write+s.written)
- handle_failed_stripe(conf, sh, &s, disks, &return_bi);
+ handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
if (s.failed > 1 && s.syncing) {
md_done_sync(conf->mddev, STRIPE_SECTORS,0);
clear_bit(STRIPE_SYNCING, &sh->state);
@@ -3128,7 +3125,7 @@ static void handle_stripe5(struct stripe_head *sh)
!test_bit(R5_LOCKED, &dev->flags) &&
test_bit(R5_UPTODATE, &dev->flags)) ||
(s.failed == 1 && s.failed_num[0] == sh->pd_idx)))
- handle_stripe_clean_event(conf, sh, disks, &return_bi);
+ handle_stripe_clean_event(conf, sh, disks, &s.return_bi);
/* Now we might consider reading some blocks, either to check/generate
* parity, or to satisfy requests
@@ -3166,7 +3163,7 @@ static void handle_stripe5(struct stripe_head *sh)
}
}
if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
- dec_preread_active = 1;
+ s.dec_preread_active = 1;
}
/* Now to consider new write requests and what else, if anything
@@ -3264,15 +3261,15 @@ static void handle_stripe5(struct stripe_head *sh)
unlock:
/* wait for this device to become unblocked */
- if (unlikely(blocked_rdev))
- md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
+ if (unlikely(s.blocked_rdev))
+ md_wait_for_blocked_rdev(s.blocked_rdev, conf->mddev);
if (s.ops_request)
raid_run_ops(sh, s.ops_request);
ops_run_io(sh, &s);
- if (dec_preread_active) {
+ if (s.dec_preread_active) {
/* We delay this until after ops_run_io so that if make_request
* is waiting on a flush, it won't continue until the writes
* have actually been submitted.
@@ -3282,19 +3279,16 @@ static void handle_stripe5(struct stripe_head *sh)
IO_THRESHOLD)
md_wakeup_thread(conf->mddev->thread);
}
- return_io(return_bi);
+ return_io(s.return_bi);
}
static void handle_stripe6(struct stripe_head *sh)
{
raid5_conf_t *conf = sh->raid_conf;
int disks = sh->disks;
- struct bio *return_bi = NULL;
int i, pd_idx = sh->pd_idx, qd_idx = sh->qd_idx;
struct stripe_head_state s;
struct r5dev *dev, *pdev, *qdev;
- mdk_rdev_t *blocked_rdev = NULL;
- int dec_preread_active = 0;
pr_debug("handling stripe %llu, state=%#lx cnt=%d, "
"pd_idx=%d, qd_idx=%d\n, check:%d, reconstruct:%d\n",
@@ -3345,9 +3339,9 @@ static void handle_stripe6(struct stripe_head *sh)
if (dev->written)
s.written++;
rdev = rcu_dereference(conf->disks[i].rdev);
- if (blocked_rdev == NULL &&
+ if (s.blocked_rdev == NULL &&
rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
- blocked_rdev = rdev;
+ s.blocked_rdev = rdev;
atomic_inc(&rdev->nr_pending);
}
clear_bit(R5_Insync, &dev->flags);
@@ -3376,15 +3370,15 @@ static void handle_stripe6(struct stripe_head *sh)
spin_unlock_irq(&conf->device_lock);
rcu_read_unlock();
- if (unlikely(blocked_rdev)) {
+ if (unlikely(s.blocked_rdev)) {
if (s.syncing || s.expanding || s.expanded ||
s.to_write || s.written) {
set_bit(STRIPE_HANDLE, &sh->state);
goto unlock;
}
/* There is nothing for the blocked_rdev to block */
- rdev_dec_pending(blocked_rdev, conf->mddev);
- blocked_rdev = NULL;
+ rdev_dec_pending(s.blocked_rdev, conf->mddev);
+ s.blocked_rdev = NULL;
}
if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
@@ -3400,7 +3394,7 @@ static void handle_stripe6(struct stripe_head *sh)
* might need to be failed
*/
if (s.failed > 2 && s.to_read+s.to_write+s.written)
- handle_failed_stripe(conf, sh, &s, disks, &return_bi);
+ handle_failed_stripe(conf, sh, &s, disks, &s.return_bi);
if (s.failed > 2 && s.syncing) {
md_done_sync(conf->mddev, STRIPE_SECTORS,0);
clear_bit(STRIPE_SYNCING, &sh->state);
@@ -3425,7 +3419,7 @@ static void handle_stripe6(struct stripe_head *sh)
(s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
&& !test_bit(R5_LOCKED, &qdev->flags)
&& test_bit(R5_UPTODATE, &qdev->flags)))))
- handle_stripe_clean_event(conf, sh, disks, &return_bi);
+ handle_stripe_clean_event(conf, sh, disks, &s.return_bi);
/* Now we might consider reading some blocks, either to check/generate
* parity, or to satisfy requests
@@ -3461,7 +3455,7 @@ static void handle_stripe6(struct stripe_head *sh)
}
}
if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
- dec_preread_active = 1;
+ s.dec_preread_active = 1;
}
/* Now to consider new write requests and what else, if anything
@@ -3561,8 +3555,8 @@ static void handle_stripe6(struct stripe_head *sh)
unlock:
/* wait for this device to become unblocked */
- if (unlikely(blocked_rdev))
- md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
+ if (unlikely(s.blocked_rdev))
+ md_wait_for_blocked_rdev(s.blocked_rdev, conf->mddev);
if (s.ops_request)
raid_run_ops(sh, s.ops_request);
@@ -3570,7 +3564,7 @@ static void handle_stripe6(struct stripe_head *sh)
ops_run_io(sh, &s);
- if (dec_preread_active) {
+ if (s.dec_preread_active) {
/* We delay this until after ops_run_io so that if make_request
* is waiting on a flush, it won't continue until the writes
* have actually been submitted.
@@ -3581,7 +3575,7 @@ static void handle_stripe6(struct stripe_head *sh)
md_wakeup_thread(conf->mddev->thread);
}
- return_io(return_bi);
+ return_io(s.return_bi);
}
static void handle_stripe(struct stripe_head *sh)
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h
index d3c61d3..9ceb574 100644
--- a/drivers/md/raid5.h
+++ b/drivers/md/raid5.h
@@ -248,6 +248,10 @@ struct stripe_head_state {
int failed_num[2];
unsigned long ops_request;
int p_failed, q_failed;
+
+ struct bio *return_bi;
+ mdk_rdev_t *blocked_rdev;
+ int dec_preread_active;
};
/* Flags */
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
