Hi Neil,
around a couple of weeks ago I sent two patches, one
was the ":offset" change for "restripe.c" and another
(here below) a complete standalone RAID-6 check.
Since then I did not get any feedback, are the patches
OK and are just in the waiting queue or there are issues?
I also have a couple of items I would like to clarify,
still in the text below (TODO list).
Thanks,
bye,
pg
On Mon, Feb 21, 2011 at 09:45:51PM +0100, Piergiorgio Sartor wrote:
> Hi Neil,
>
> please find attached a patch, to mdadm-3.2 base, including
> a standalone versione of the raid-6 check.
>
> This is basically a re-working (and hopefully improvement)
> of the already implemented check in "restripe.c".
>
> I splitted the check function into "collect" and "stats",
> so that the second one could be easily replaced.
> The API is also simplified.
>
> The command line option are reduced, since we only level
> is raid-6, but the ":offset" option is included.
>
> The output reports the block/stripe rotation, P/Q errors
> and the possible HDD (or unknown).
>
> BTW, the patch applies also to the already patched "restripe.c",
> including the last ":offset" patch (which is not yet in git).
>
> Other item is that due to "sysfs.c" linking (see below) the
> "Makefile" needed some changes, I hope this is not a problem.
>
> Next steps (TODO list you like) would be:
>
> 1) Add the "sysfs.c" code in order to retrieve the HDDs info
> from the MD device. It is already linked, together with the
> whole (mdadm) universe, since it seems it cannot leave alone.
> I'll need some advice or hint on how to do use it. I checked
> "sysfs.c", but before I dig deep into it maybe better to
> have some advice (maybe just one function call will do it).
>
> 2) Add the suspend lo/hi control. Fellow John Robinson was
> suggesting to look into "Grow.c", which I did, but I guess
> the same story as 1) is valid: better to have some hint on
> where to look before wasting time.
>
> 3) Add a repair option (future). This should have different
> levels, like "all", "disk", "stripe". That is, fix everything
> (more or less like "repair"), fix only if a disk is clearly
> having problems, fix each stripe which has clearly a problem
> (but maybe different stripes may belong to different HDDs).
>
> So, for the point 1) and 2) would be nice to have some more
> detail on where to look what. Point 3) we will discuss later.
>
> Thanks, please consider for inclusion,
>
> bye,
>
> pg
>
>
> diff -urN a/Makefile b/Makefile
> --- a/Makefile 2011-02-01 05:31:07.000000000 +0100
> +++ b/Makefile 2011-02-20 00:03:44.929998038 +0100
> @@ -98,7 +98,7 @@
> MAN5DIR = $(MANDIR)/man5
> MAN8DIR = $(MANDIR)/man8
>
> -OBJS = mdadm.o config.o policy.o mdstat.o ReadMe.o util.o Manage.o Assemble.o Build.o \
> +OBJSX = config.o policy.o mdstat.o ReadMe.o util.o Manage.o Assemble.o Build.o \
> Create.o Detail.o Examine.o Grow.o Monitor.o dlink.o Kill.o Query.o \
> Incremental.o \
> mdopen.o super0.o super1.o super-ddf.o super-intel.o bitmap.o \
> @@ -106,6 +106,8 @@
> restripe.o sysfs.o sha1.o mapfile.o crc32.o sg_io.o msg.o \
> platform-intel.o probe_roms.o
>
> +OBJS = mdadm.o $(OBJSX)
> +
> SRCS = mdadm.c config.c policy.c mdstat.c ReadMe.c util.c Manage.c Assemble.c Build.c \
> Create.c Detail.c Examine.c Grow.c Monitor.c dlink.c Kill.c Query.c \
> Incremental.c \
> @@ -182,6 +184,9 @@
> test_stripe : restripe.c mdadm.h
> $(CC) $(CXFLAGS) $(LDFLAGS) -o test_stripe -DMAIN restripe.c
>
> +raid6check : raid6check.o mdadm.h $(OBJSX)
> + $(CC) $(CXFLAGS) $(LDFLAGS) -o raid6check raid6check.o $(OBJSX)
> +
> mdassemble : $(ASSEMBLE_SRCS) $(INCL)
> rm -f $(OBJS)
> $(DIET_GCC) $(ASSEMBLE_FLAGS) -o mdassemble $(ASSEMBLE_SRCS) $(STATICSRC)
> @@ -265,7 +270,7 @@
> mdadm.Os mdadm.O2 mdmon.O2 \
> mdassemble mdassemble.static mdassemble.auto mdassemble.uclibc \
> mdassemble.klibc swap_super \
> - init.cpio.gz mdadm.uclibc.static test_stripe mdmon \
> + init.cpio.gz mdadm.uclibc.static test_stripe raid6check raid6check.o mdmon \
> mdadm.8
>
> dist : clean
> diff -urN a/raid6check.c b/raid6check.c
> --- a/raid6check.c 1970-01-01 01:00:00.000000000 +0100
> +++ b/raid6check.c 2011-02-21 21:40:27.813656214 +0100
> @@ -0,0 +1,263 @@
> +/*
> + * raid6check - extended consistency check for RAID-6
> + *
> + * Copyright (C) 2011 Piergiorgio Sartor
> + *
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + * Author: Piergiorgio Sartor
> + * Based on "restripe.c" from "mdadm" codebase
> + */
> +
> +#include "mdadm.h"
> +#include <stdint.h>
> +
> +int geo_map(int block, unsigned long long stripe, int raid_disks,
> + int level, int layout);
> +void qsyndrome(uint8_t *p, uint8_t *q, uint8_t **sources, int disks, int size);
> +void make_tables(void);
> +
> +/* Collect per stripe consistency information */
> +void raid6_collect(int chunk_size, uint8_t *p, uint8_t *q,
> + char *chunkP, char *chunkQ, int *results)
> +{
> + int i;
> + int data_id;
> + uint8_t Px, Qx;
> + extern uint8_t raid6_gflog[];
> +
> + for(i = 0; i < chunk_size; i++) {
> + Px = (uint8_t)chunkP[i] ^ (uint8_t)p[i];
> + Qx = (uint8_t)chunkQ[i] ^ (uint8_t)q[i];
> +
> + if((Px != 0) && (Qx == 0))
> + results[i] = -1;
> +
> + if((Px == 0) && (Qx != 0))
> + results[i] = -2;
> +
> + if((Px != 0) && (Qx != 0)) {
> + data_id = (raid6_gflog[Qx] - raid6_gflog[Px]);
> + if(data_id < 0) data_id += 255;
> + results[i] = data_id;
> + }
> +
> + if((Px == 0) && (Qx == 0))
> + results[i] = -255;
> + }
> +}
> +
> +/* Try to find out if a specific disk has problems */
> +int raid6_stats(int *results, int raid_disks, int chunk_size)
> +{
> + int i;
> + int curr_broken_disk = -255;
> + int prev_broken_disk = -255;
> + int broken_status = 0;
> +
> + for(i = 0; i < chunk_size; i++) {
> +
> + if(results[i] != -255)
> + curr_broken_disk = results[i];
> +
> + if(curr_broken_disk >= raid_disks)
> + broken_status = 2;
> +
> + switch(broken_status) {
> + case 0:
> + if(curr_broken_disk != -255) {
> + prev_broken_disk = curr_broken_disk;
> + broken_status = 1;
> + }
> + break;
> +
> + case 1:
> + if(curr_broken_disk != prev_broken_disk)
> + broken_status = 2;
> + break;
> +
> + case 2:
> + default:
> + curr_broken_disk = prev_broken_disk = -65535;
> + break;
> + }
> + }
> +
> + return curr_broken_disk;
> +}
> +
> +int check_stripes(int *source, unsigned long long *offsets,
> + int raid_disks, int chunk_size, int level, int layout,
> + unsigned long long start, unsigned long long length, char *name[])
> +{
> + /* read the data and p and q blocks, and check we got them right */
> + char *stripe_buf = malloc(raid_disks * chunk_size);
> + char **stripes = malloc(raid_disks * sizeof(char*));
> + char **blocks = malloc(raid_disks * sizeof(char*));
> + uint8_t *p = malloc(chunk_size);
> + uint8_t *q = malloc(chunk_size);
> + int *results = malloc(chunk_size * sizeof(int));
> +
> + int i;
> + int diskP, diskQ;
> + int data_disks = raid_disks - 2;
> +
> + extern int tables_ready;
> +
> + if (!tables_ready)
> + make_tables();
> +
> + for ( i = 0 ; i < raid_disks ; i++)
> + stripes[i] = stripe_buf + i * chunk_size;
> +
> + while (length > 0) {
> + int disk;
> +
> + for (i = 0 ; i < raid_disks ; i++) {
> + lseek64(source[i], offsets[i]+start, 0);
> + read(source[i], stripes[i], chunk_size);
> + }
> + for (i = 0 ; i < data_disks ; i++) {
> + int disk = geo_map(i, start/chunk_size, raid_disks,
> + level, layout);
> + blocks[i] = stripes[disk];
> + printf("%d->%d\n", i, disk);
> + }
> +
> + qsyndrome(p, q, (uint8_t**)blocks, data_disks, chunk_size);
> + diskP = geo_map(-1, start/chunk_size, raid_disks,
> + level, layout);
> + if (memcmp(p, stripes[diskP], chunk_size) != 0) {
> + printf("P(%d) wrong at %llu\n", diskP,
> + start / chunk_size);
> + }
> + diskQ = geo_map(-2, start/chunk_size, raid_disks,
> + level, layout);
> + if (memcmp(q, stripes[diskQ], chunk_size) != 0) {
> + printf("Q(%d) wrong at %llu\n", diskQ,
> + start / chunk_size);
> + }
> + raid6_collect(chunk_size, p, q,
> + stripes[diskP], stripes[diskQ], results);
> + disk = raid6_stats(results, raid_disks, chunk_size);
> +
> + if(disk >= -2) {
> + disk = geo_map(disk, start/chunk_size, raid_disks,
> + level, layout);
> + }
> + if(disk >= 0) {
> + printf("Possible failed disk: %d --> %s\n", disk, name[disk]);
> + }
> + if(disk == -65535) {
> + printf("Failure detected, but disk unknown\n");
> + }
> +
> + length -= chunk_size;
> + start += chunk_size;
> + }
> +
> + free(stripe_buf);
> + free(stripes);
> + free(blocks);
> + free(p);
> + free(q);
> + free(results);
> +
> + return 0;
> +}
> +
> +unsigned long long getnum(char *str, char **err)
> +{
> + char *e;
> + unsigned long long rv = strtoull(str, &e, 10);
> + if (e==str || *e) {
> + *err = str;
> + return 0;
> + }
> + return rv;
> +}
> +
> +int main(int argc, char *argv[])
> +{
> + /* raid_disks chunk_size layout start length devices...
> + */
> + int *fds;
> + char *buf;
> + unsigned long long *offsets;
> + int raid_disks, chunk_size, layout;
> + int level = 6;
> + unsigned long long start, length;
> + int i;
> +
> + char *err = NULL;
> + if (argc < 8) {
> + fprintf(stderr, "Usage: raid6check raid_disks"
> + " chunk_size layout start length devices...\n");
> + exit(1);
> + }
> +
> + raid_disks = getnum(argv[1], &err);
> + chunk_size = getnum(argv[2], &err);
> + layout = getnum(argv[3], &err);
> + start = getnum(argv[4], &err);
> + length = getnum(argv[5], &err);
> + if (err) {
> + fprintf(stderr, "test_stripe: Bad number: %s\n", err);
> + exit(2);
> + }
> + if (argc != raid_disks + 6) {
> + fprintf(stderr, "test_stripe: wrong number of devices: want %d found %d\n",
> + raid_disks, argc-6);
> + exit(2);
> + }
> + fds = malloc(raid_disks * sizeof(*fds));
> + offsets = malloc(raid_disks * sizeof(*offsets));
> + memset(offsets, 0, raid_disks * sizeof(*offsets));
> +
> + for (i=0; i<raid_disks; i++) {
> + char *p;
> + p = strchr(argv[6+i], ':');
> +
> + if(p != NULL) {
> + *p++ = '\0';
> + offsets[i] = atoll(p) * 512;
> + }
> + fds[i] = open(argv[6+i], O_RDWR);
> + if (fds[i] < 0) {
> + perror(argv[6+i]);
> + fprintf(stderr,"test_stripe: cannot open %s.\n", argv[6+i]);
> + exit(3);
> + }
> + }
> +
> + buf = malloc(raid_disks * chunk_size);
> +
> + int rv = check_stripes(fds, offsets,
> + raid_disks, chunk_size, level, layout,
> + start, length, &argv[6]);
> + if (rv != 0) {
> + fprintf(stderr,
> + "test_stripe: test_stripes returned %d\n", rv);
> + exit(1);
> + }
> +
> + free(fds);
> + free(offsets);
> + free(buf);
> +
> + exit(0);
> +}
> +
> diff -urN a/restripe.c b/restripe.c
> --- a/restripe.c 2011-02-19 22:36:29.707651642 +0100
> +++ b/restripe.c 2011-02-19 18:13:14.468626986 +0100
> @@ -33,7 +33,7 @@
> *
> */
>
> -static int geo_map(int block, unsigned long long stripe, int raid_disks,
> +int geo_map(int block, unsigned long long stripe, int raid_disks,
> int level, int layout)
> {
> /* On the given stripe, find which disk in the array will have
> @@ -223,7 +223,7 @@
> }
> }
>
> -static void qsyndrome(uint8_t *p, uint8_t *q, uint8_t **sources, int disks, int size)
> +void qsyndrome(uint8_t *p, uint8_t *q, uint8_t **sources, int disks, int size)
> {
> int d, z;
> uint8_t wq0, wp0, wd0, w10, w20;
>
> --
>
> piergiorgio
> --
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
piergiorgio
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
