Re: read errors corrected

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 31 Dec 2010 01:48:07 +0000 James <jtp@xxxxxxxxx> wrote:

> Neil,
> 
> I'm runinng 2.6.35.
> 
> Although an expensive route, the only thing I can think to do to
> determine 100% whether the issue is software or hardware (and, if
> hardware, whether SATA controller or the drives) is to swap the drives
> out.
> 
> Ouch!
> 
> Any other ideas, however, would be appreciated before I drop a few
> hundred bucks. :)

Buy a PCIe SATA controller, plug it in and move some/all drives over to that?
Should be a lot less than $100.  Make sure it is a different chipset to what
you have on your motherboard.

NeilBrown
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux