Re: argh!

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/30/2010 07:56 AM, Jon Hardcastle wrote:
> Guys,
> 
> a new HDD has failed on me during a scrub.... i tried to remove/fail it but
> it kept saying the device was busy. so i forced a reboot.
> 
> I have physically disconnected the drive..
> 
> can anyone take alook at the examine below and tell me if it is should
> assemble ok?
> 
> I tried
> 
> mdadm --assemble /dev/md4 /dev/sda1 /dev/sdb1 /dev/sdd1 /dev/sde1 /dev/sdf1
> /dev/sdg1

I'd try:

mdadm --assemble /dev/md4 /dev/sd{g,a,e}1 missing /dev/sd{d,b,f}1

HTH,

Phil
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux