This was ment to goto the list. Keep forgetting, this list uses
responder instead of list for reply address.
-------- Original Message --------
Subject: Re: possible bus loading problem during resync
Date: Wed, 10 Mar 2010 17:04:07 -0700
From: Timothy D. Lenz <tlenz@xxxxxxxxxx>
To: Asdo <asdo@xxxxxxxxxxxxx>
On 3/9/2010 4:00 AM, Asdo wrote:
Kristleifur Daðason wrote:
On Tue, Mar 9, 2010 at 6:31 AM, Timothy D. Lenz <tlenz@xxxxxxxxxx> wrote:
I'm working on 2 systems that are mainly for running vdr. I've had these
running somewhat for awhile with raid. But a couple nights ago as I was
quitting for the night, I noticed one of the computers drive light
staying
on. I had just made some changes to xine and didn't know if something
had
crashed. Turned on the TV and found the video was freezing for 10-20secs
every 10-20secs. Logging in using putty and winscp I found it very
sluggish
to respond.Starting top I found it was doing the regular array
check/resync.......
--
Sorry about the incredibly brief answer: Not to dismiss other issues,
but that behavior seems like exactly what I've seen when a disk has
been failing.
If that is true, how does that happen, the driver is hung? But anyway,
how can such things happen when there is more than one CPU-core?
try disabling NCQ by echo 1 > /sys/block/sdX/device/queue_depth for all
drives. After doing this, at most 1 request can be issued to one drive
until the drive has serviced such request.
After doing this, firstly I'd say the sluggishness should disappear, at
least on SSH when not touching the disks. And then you can look with
"iostat -x 1": probably the bad drive will have a service time (svctm)
or await much worse than the others.
Just guesses, correct me if I'm wrong
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
First output is 5.12 for sda and 1.15 for sdb every time it's started.
then mostly 0 for both. When there are numbers it changes back and forth
between then as to which is greater.
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s
avgrq-sz avgqu-sz await svctm %util
sda 6.90 30.46 2.09 1.90 1164.19 258.92
356.52 0.10 23.99 5.12 2.04
sdb 0.16 30.46 8.84 1.90 1165.65 258.92
132.67 0.02 2.25 1.51 1.62
Was this test supposed to be done while it was doing a sync? Because it
was the same if I made the change to 1 or put them back to the default
value 31.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
