Mark Knecht wrote:
First post. I've never used RAID but am thinking about it and looking
for newbie-level info. Thanks in advance.
I'm thinking about building a machine for long term number crunching
of stock market data. Highest end processor I can get, 16GB and at
least reasonably fast drives. I've not done RAID before and don't know
how to choose one RAID type over another for this sort of workload.
All I know is I want the machine to run 24/7 computing 100% of the
time and be reliable at least in the sense of not losing data if 1
drive or possibly 2 go down.
If a drive does go down I'm not overly worried about down time. I'll
stock a couple of spares when I build the machine and power the box
back up within an hour or two.
What RAID type do I choose and why?
Do I need a 5 physical drive RAID array to meet these requirements?
Assume 1TB+ drives all around.
How critical is it going forward with Linux RAID solutions to be able
to get exactly the same drives in the future? 1TB today is 4TB a year
from now, etc.
Hi Mark
I'll reply to just a few points.
You don't need the same drives, only a few requirements:
1 - The drives need to play well with the controller. Do some tests.
There were rare cases of certain drives being dropped by certain
controllers e.g. on high I/O. Just do some tests before putting valuable
data in. Maybe look at the HCL list for your controller before buying.
2 - the new drives need to be at least as large as the old ones. Extra
space will be wasted (ok not exactly, you can use the extra space for
other purposes). Speed is not relevant for bare functionality.
3 - It's better if new drives are not slower than the older drives.
Everything moves at the speed of the slowest drive.
4 - Better to take raid-edition or enterprise-grade drives, especially
because they usually have RTL "recovery time limit" also called TLER
(time limited error recovery). Go google for it to understand why it is
useful in RAID.
With an 8 core processor (high-end Intel Core i7 probably) do I need
to worry much about CPU usage doing RAID? I suspect not and I don't
really want to get into hardware RAID controllers unless critically
necessary which I suspect it isn't.
I think for a 5 disks raid array the CPU power is still not the limiting
factor. Especially not in the fast raids like raid10. Note that only 1
core will be used for RAID parity computation for raid456. All cores
will be used for handling interrupts from the drives though.
Difficult to suggest what RAID you should use. We don't know access
patterns, speed requirements, value of your data.
Minimum for redundancy is raid-1 on 2 drives.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
