Re: Slow(?) raid5 to raid6 reshape speed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



here is the output. i have watched it

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           3.87    0.00    2.23    8.52    0.00   85.38

Device:         rrqm/s   wrqm/s     r/s     w/s   rsec/s   wsec/s avgrq-sz
avgqu-sz   await  svctm  %util
sda             859.60   857.60   74.40   21.20 14192.00  7030.40   221.99
   0.98   10.33   6.35  60.72
sdb               0.00     0.00    0.00    0.00     0.00     0.00     0.00
   0.00    0.00   0.00   0.00
sdd             831.40   840.60  100.40   43.20 14198.40  7070.40   148.11
   0.50    3.50   1.73  24.86
sdc             831.20   836.40  100.60   44.20 14198.40  7044.80   146.71
   0.51    3.52   1.81  26.14
sde               0.00     0.00    0.00   40.40     0.00 19673.60   486.97
   8.72  215.79   4.46  18.00
sdf             854.60   865.40   77.20   17.20 14174.40  7060.80   224.95
   1.28   13.61   4.95  46.72
sdg               0.00   854.80    0.20   27.80     1.60  7060.80   252.23
   0.69   24.60  11.17  31.28

a minute later (just to state another one):
avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           3.15    0.00    2.16   10.28    0.00   84.41

Device:         rrqm/s   wrqm/s     r/s     w/s   rsec/s   wsec/s avgrq-sz
avgqu-sz   await  svctm  %util
sda             811.60   813.80   92.20   16.60 16446.40  6643.20   212.22
   0.97    9.05   5.54  60.32
sdb               0.00     0.00    0.00    0.00     0.00     0.00     0.00
   0.00    0.00   0.00   0.00
sdd             785.00   790.60  117.60   40.60 16436.80  6649.60   145.93
   0.47    2.98   1.50  23.66
sdc             785.80   791.20  116.80   40.00 16436.80  6649.60   147.23
   0.49    3.14   1.57  24.68
sde               0.00     0.00    0.00   45.20     0.00 21844.80   483.29
  10.51  197.05   4.38  19.80
sdf             809.00   815.60   94.80   14.60 16446.40  6641.60   211.04
   1.26   11.47   4.27  46.74
sdg               0.00   808.00    0.00   23.40     0.00  6651.20   284.24
   0.64   27.41  12.33  28.86

so this is not 100%, right?

On Tue, 16 Feb 2010 12:53:27 +0100 (CET), Mikael Abrahamsson
<swmike@xxxxxxxxx> wrote:
> On Tue, 16 Feb 2010, Michael wrote:
> 
>> i think the kernel's raid io is not visible at iotop or iam wrong?
> 
> Use "iostat -x 5" to see what is going on, personally I used 
> "sync_speed_min" so my drives were around 50-80% busy because for some 
> reason it tried to use much lower speed a otherwise.
> 
> If your drives are already at 100% then there is nothing more to do than

> to wait it out...
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux