Re: unknown partition table starting with 2.6.28

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15/01/2010 23:58, Timothy D. Lenz wrote:
I am trying to update my kernel from 2.6.26.8 to the current .32.
[...]
Starting with .28 I am getting an error about unknown partition table for all 3 md's. md0 is boot and main programs, md1 is swap, md2 is mostly recordings storage for vdr. All 3 are raid 1 and raid is built in.

Your md devices aren't partitioned so you can quite safely ignore the warning. See also http://marc.info/?l=linux-raid&m=125797242110594&w=2

Cheers,

John.

--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux