RE: [PATCH 1/3] ioat3: fix p-disabled q-continuation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Williams, Dan J wrote:
> When continuing a pq calculation the driver needs 3 extra sources.  The
> driver can perform a 3 source calculation with a single descriptor, but
> needs an extended descriptor to process up to 8 sources in one
> operation.  However, in the p-disabled case only one extra source is
> needed.  When continuing a p-disabled operation there are occasions
> (i.e. 0 < src_cnt % 8 < 3) where the tail operation does not need an
> extended descriptor.  Properly account for this fact otherwise invalid
> 'dmacount' values will be written to hardware usually causing the
> channel to halt with 'invalid descriptor' errors.
> 
> Cc: <stable@xxxxxxxxxx>
> Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
> ---

Acked-by: Maciej Sosnowski <maciej.sosnowski@xxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux