Hi... I am wondering if anyone can offer some advice on MD performance related to CPU (speed and or cores). The basic question (probably too basic) is “for more MD performance are you better with more cpu’s or a faster single cpu”. (in an ideal world we would have lots of very fast CPUs, but given we never have enough money....). Is there any grounding to the following logic: Presuming that a RAID0 will deliver 1.5GBsec and a RAID6 circa 700MBsec, I am guessing there are many complex reasons for the difference, but one of the more obvious being the need for the CPU to perform all the necessary R6 overheads. If we look at a single RAID 6 configuration, then I am guessing if we increase the speed of the CPU from eg 2.0GHz to 2.8GHz (quad core xeon) then the RAID6 calculations would be faster? Would other overheads also be faster and if so is there any know relationship between CPU Hz and MD performance (maybe even rough rule of thumb eg double cpu Hz and increase R6 performance by 20% etc) If however I start to think of multiple RAID6 configurations maybe via iSCSI etc... then I wonder if MD would be better served with more CPUs instead... for example 2 x Quad core 2.0GHz xeons instead of 1 x 2.8. This theory is dependent on linux / md effectively parallel processing the overheads and I have no knowledge in this area... hence the question. Any thoughts anyone? -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
