Maxime Boissonneault a écrit :
The initrd is the ramdisk which the kernel boots to first, containing
the various modules and utility programs (like mdadm) needed to access
the main root filesytem. A quick search suggests that you need to run
'update-initramfs -u' on Ubuntu. You'll need to boot off the CD and
chroot onto the new array first though - something like:
- Boot off CD
- Assemble the RAID arrays
- Create a mount point for the new array (mkdir /mnt/newroot)
- Mount the root filesystem (mount /dev/md1 /mnt/newroot)
- Mount the proc filesystem (mount -o bind /proc /mnt/newroot/proc)
- Mount the sys filesystem (mount -o bind /sys /mnt/newroot/sys)
- Mount the dev filesystem (mount -o bind /dev /mnt/newroot/dev)
- Chroot to the new array (chroot /mnt/newroot /bin/bash)
- Mount the boot filesystem (mount /boot)
- Update the initramfs (update-initramfs -u)
- Unmount the boot filesystem (umount /boot)
- Exit the chroot (exit)
- Unmount the dev filesystem (umount /mnt/newroot/dev)
- Unmount the sys filesystem (umount /mnt/newroot/sys)
- Unmount the proc filesystem (umount /mnt/newroot/proc)
- Unmount the root filesystem (umount /mnt/newroot)
- Reboot
That's just from memory though, so watch out for any warnings/errors.
The other issue you _may_ have is the raid5 module missing from the
initrd - you'd best check that raid5 is listed in
/etc/initramfs/modules.
RAID5 should not be missing, my /home was a RAID5.
Yes, but /home is only mounted after it's accessed the root partition.
It can then read any modules from the root partition, so the raid5
module could still be missing from the initrd. I suspect it'll have
included it though.
I did as you suggested above. I still get the same error message.
I have looked and did not find /etc/initramfs/modules. Instead, I
found /etc/initramfs-tools/modules. In this file, there were a couple
of comment lines explaining how to enable modules.
No modules were included.
I uncommented the "raid1" and added "raid5" and ran the procedure again.
Still getting the same problem.
Since the problem seems to be the boot, I will try to do a fresh
install, then restore my backup while keeping the /boot from the fresh
install.
Thanks,
Maxime
Ok, I just did that, and I get the same problem. However, now, if I
press ctrl+alt+del while the system is trying to load, it tells me that
process rc5 and rc6 have been killed, and it bring me up to the login
screen of ubuntu.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
