Currently, the md layer checks in analyze_sbs() if the raid level
supports reconstruction (mddev->level >= 1) and if reconstruction is
in progress (mddev->recovery_cp != MaxSector).
Move that printk into the personality code of those raid levels that
care (levels 1, 4, 5, 6, 10).
Signed-off-by: Andre Noll <maan@xxxxxxxxxxxxxxx>
---
drivers/md/md.c | 9 ---------
drivers/md/raid1.c | 4 ++++
drivers/md/raid10.c | 4 ++++
drivers/md/raid5.c | 4 ++++
4 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index a54ec91..1d71cc2 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -2597,15 +2597,6 @@ static void analyze_sbs(mddev_t * mddev)
clear_bit(In_sync, &rdev->flags);
}
}
-
-
-
- if (mddev->recovery_cp != MaxSector &&
- mddev->level >= 1)
- printk(KERN_ERR "md: %s: raid array is not clean"
- " -- starting background reconstruction\n",
- mdname(mddev));
-
}
static void md_safemode_timeout(unsigned long data);
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 4692a8a..d29842f 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -2052,6 +2052,10 @@ static int run(mddev_t *mddev)
goto out_free_conf;
}
+ if (mddev->recovery_cp != MaxSector)
+ printk(KERN_NOTICE "raid1: %s is not clean"
+ " -- starting background reconstruction\n",
+ mdname(mddev));
printk(KERN_INFO
"raid1: raid set %s active with %d out of %d mirrors\n",
mdname(mddev), mddev->raid_disks - mddev->degraded,
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index d75cb96..c317543 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2186,6 +2186,10 @@ static int run(mddev_t *mddev)
goto out_free_conf;
}
+ if (mddev->recovery_cp != MaxSector)
+ printk(KERN_NOTICE "raid10: %s is not clean"
+ " -- starting background reconstruction\n",
+ mdname(mddev));
printk(KERN_INFO
"raid10: raid set %s active with %d out of %d devices\n",
mdname(mddev), mddev->raid_disks - mddev->degraded,
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 9ec505b..cdd5b49 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4454,6 +4454,10 @@ static int run(mddev_t *mddev)
int working_disks = 0;
mdk_rdev_t *rdev;
+ if (mddev->recovery_cp != MaxSector)
+ printk(KERN_NOTICE "raid5: %s is not clean"
+ " -- starting background reconstruction\n",
+ mdname(mddev));
if (mddev->reshape_position != MaxSector) {
/* Check that we can continue the reshape.
* Currently only disks can change, it must
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
