On Wed, 12 Nov 2008, Justin Piszcz wrote:
$ cat /proc/mdstat Personalities : [raid1] [raid6] [raid5] [raid4] md1 : active raid1 sdb2[1] sda2[0]136448 blocks [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 276109056 blocks [2/2] [UU]md3 : active raid6 sdj1[10] sdc1[4] sdl1[8] sdk1[1] sdi1[9] sdh1[7] sdg1[6] sdf1[3] sde1[2] sdd1[0]2344263680 blocks level 6, 1024k chunk, algorithm 2 [10/9] [UUUUU_UUUU][===================>.] recovery = 99.1% (290466636/293032960) finish=0.6min speed=67979K/secmd0 : active raid1 sdb1[1] sda1[0] 16787776 blocks [2/2] [UU] unused devices: <none> -- But in the kernel logs: [ 3497.577716] md: recovery of RAID array md3 [ 3497.577720] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.[ 3497.577721] md: using maximum available idle IO bandwidth (but not more than 90000 KB/sec) for recovery.[ 3497.577728] md: using 128k window, over a total of 293032960 blocks. [ 6981.488528] md: md3: recovery done. [ 6982.273208] RAID5 conf printout: ^^^^^ [ 6982.273215] --- rd:10 wd:10 [ 6982.273219] disk 0, o:1, dev:sdd1 [ 6982.273223] disk 1, o:1, dev:sdk1 [ 6982.273227] disk 2, o:1, dev:sde1 [ 6982.273231] disk 3, o:1, dev:sdf1 [ 6982.273245] disk 4, o:1, dev:sdc1 [ 6982.273258] disk 5, o:1, dev:sdj1 [ 6982.273260] disk 6, o:1, dev:sdg1 [ 6982.273263] disk 7, o:1, dev:sdh1 [ 6982.273265] disk 8, o:1, dev:sdl1 [ 6982.273267] disk 9, o:1, dev:sdi1 Is the type detectable via auto-assemble, if it is shouldn't it print out the right raid type in the logs/dmesg? Justin.
Forgot to cc linux-raid. -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
