On Tue, Sep 09, 2008 at 01:46:00PM +0200, Tejun Heo wrote: > Martin Michlmayr wrote: > > A Debian user reported the following oops (2.6.26, RAID1 + LVM, > > running on an ARM platform, sata_mv): > Can you please attach full log? unfortunately I've rebooted the box and lost the logs :( It it happens again, I'll make sure to keep the entire log. this should be a useful context : [42949380.710000] ata1.00: configured for UDMA/133 [42949381.230000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [42949381.250000] ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01112, max UDMA7 [42949381.250000] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [42949381.280000] ata2.00: configured for UDMA/133 [42949381.280000] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [42949381.290000] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5 [42949381.470000] Driver 'sd' needs updating - please use bus_type methods [42949381.520000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [42949381.520000] sd 0:0:0:0: [sda] Write Protect is off [42949381.530000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [42949381.530000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [42949381.560000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [42949381.570000] sd 0:0:0:0: [sda] Write Protect is off [42949381.570000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [42949381.570000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [42949381.580000] sda: sda1 [42949381.600000] sd 0:0:0:0: [sda] Attached SCSI disk [42949381.640000] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [42949381.650000] sd 1:0:0:0: [sdb] Write Protect is off [42949381.660000] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [42949381.680000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [42949381.690000] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [42949381.710000] sd 1:0:0:0: [sdb] Write Protect is off [42949381.710000] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [42949381.710000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [42949381.720000] sdb: sdb1 [42949381.750000] sd 1:0:0:0: [sdb] Attached SCSI disk [42949767.970000] warning: process `rdate' used the deprecated sysctl system call with 1.40. [42949775.860000] Initializing USB Mass Storage driver... [42949775.860000] usbcore: registered new interface driver usb-storage [42949775.860000] USB Mass Storage support registered. [42949809.460000] md: md0 stopped. [42949809.510000] md: bind<sdb1> [42949809.510000] md: bind<sda1> [42949809.510000] md: md0: raid array is not clean -- starting background reconstruction [42949809.590000] md: raid1 personality registered for level 1 [42949809.590000] raid1: raid set md0 active with 2 out of 2 mirrors [42949809.620000] md: resync of RAID array md0 [42949809.620000] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [42949809.620000] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync. [42949809.620000] md: using 128k window, over a total of 488383936 blocks. [42949811.110000] device-mapper: uevent: version 1.0.3 [42949811.140000] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx [42949814.890000] NOHZ: local_softirq_pending 100 -- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
