On Sun, 15 Jun 2008, Karl Dubois wrote:
Hey everyone!
I'll make it quick. I've got two arrays, both composed of 4 disks. The first one
works fine and is composed of 4 disk (sda4, sdb1, sdd2, sdf2).
The second one is composed of four disk (sdc1, sdd1, sde1, sdf1) and gives some
1. Show smartctl -a output for all disks.
2. Have you tried swapping the disks?
array1 -> array2's controller/port/cables
array2 -> array1's controller/port/cables
.. and see if the problem persists?
3. Also what filesystem?
4. Have you run an fsck?
Seems like a very odd problem since both arrays share some of the same
disks: sdd/sdf
Have you tried isolating/putting the other two 'non-shared' disks of the
second raid on a different controller? Changing SATA cables/etc?
Justin.
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
