Dear Norman,
So... we're curious how Linux will handle such a beast. Has anyone run
MD software RAID over so many disks? Then piled LVM/ext3 on top of
that? Any suggestions?
Are we crazy to think this is even possible?
I'm running 22x 500GB disks attached to RocketRaid2340 and NFORCE-MCP55
onboard controllers on an Athlon DC 5000+ with 1GB RAM:
9746150400 blocks super 1.2 level 6, 256k chunk, algorithm 2 [22/22]
Performance of the raw device is fair:
# dd if=/dev/md2 of=/dev/zero bs=128k count=64k
65536+0 records in
65536+0 records out
8589934592 bytes (8.6 GB) copied, 15.6071 seconds, 550 MB/s
Somewhat less through ext3 (created with -E stride=64):
# dd if=largetestfile of=/dev/zero bs=128k count=64k
65536+0 records in
65536+0 records out
8589934592 bytes (8.6 GB) copied, 26.4103 seconds, 325 MB/s
There were no problems up to now. (mkfs.ext3 wants -F to create a
filesystem larger than 8TB. The hard maximum is 16TB, so you will need
to create partitions, if your drives are larger than 350GB...)
Kind regards,
Thiemo Nagel
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html