Could you please give me more details about this? What do you mean the fast
end and slow end part of disk? Do you mean the location in each disk
platter?
Thanks,
Liang
----- Original Message -----
From: "Justin Piszcz" <jpiszcz@xxxxxxxxxxxxxxx>
To: "Liang Yang" <multisyncfe991@xxxxxxxxxxx>
Cc: <linux-raid@xxxxxxxxxxxxxxx>
Sent: Thursday, May 10, 2007 2:33 PM
Subject: Re: Questions about the speed when MD-RAID array is being
initialized.
On Thu, 10 May 2007, Liang Yang wrote:
Hi,
I created a MD-RAID5 array using 8 Maxtor SAS Disk Drives (chunk size is
256k). I have measured the data transfer speed for single SAS disk drive
(physical drive, not filesystem on it), it is roughly about 80~90MB/s.
However, I notice MD also reports the speed for the RAID5 array when it
is being initialized (cat /proc/mdstat). The speed reported by MD is not
constant which is roughly from 70MB/s to 90MB/s (average is 85MB/s which
is very close to the single disk data transfer speed).
I just have three questions:
1. What is the exact meaning of the array speed reported by MD? Is that
mesured for the whole array (I used 8 disks) or for just single
underlying disk? If it is for the whole array, then 70~90B/s seems too
low considering 8 disks are used for this array.
2. How is this speed measured and what is the I/O packet size being used
when the speed is measured?
3. From the beginning when MD-RAID 5 array is initialized to the end when
the intialization is done, the speed reports by MD gradually decrease
from 90MB/s down to 70MB/s. Why does the speed change? Why does the speed
gradually decrease?
Could anyone give me some explanation?
I'm using RHEL 4U4 with 2.6.18 kernel. MDADM version is 1.6.
Thanks a lot,
Liang
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
For no 3. because it starts from the fast end of the disk and works its
way to the slower part (slower speeds).
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
