Re: Software RAID (non-preempt) server blocking question. (2.6.20.4)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On Fri, 30 Mar 2007, Neil Brown wrote:

On Thursday March 29, jpiszcz@xxxxxxxxxxxxxxx wrote:


Did you look at "cat /proc/mdstat" ?? What sort of speed was the check
running at?
Around 44MB/s.

I do use the following optimization, perhaps a bad idea if I want other
processes to 'stay alive'?

echo "Setting minimum resync speed to 200MB/s..."
echo "This improves the resync speed from 2.1MB/s to 44MB/s"
echo 200000 > /sys/block/md0/md/sync_speed_min
echo 200000 > /sys/block/md1/md/sync_speed_min
echo 200000 > /sys/block/md2/md/sync_speed_min
echo 200000 > /sys/block/md3/md/sync_speed_min
echo 200000 > /sys/block/md4/md/sync_speed_min


Yes, well....

You told it to use up to 200MB/s and the drives are only delivering
44MB/s, so they will be taking nearly all of the available bandwidth.
You shouldn't be too surprised if other things suffer.

NeilBrown


Understood, will reduce this, thanks.

Justin.
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux