Re: Software RAID (non-preempt) server blocking question. (2.6.20.4)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday March 29, jpiszcz@xxxxxxxxxxxxxxx wrote:
> 
> >
> > Did you look at "cat /proc/mdstat" ?? What sort of speed was the check
> > running at?
> Around 44MB/s.
> 
> I do use the following optimization, perhaps a bad idea if I want other 
> processes to 'stay alive'?
> 
> echo "Setting minimum resync speed to 200MB/s..."
> echo "This improves the resync speed from 2.1MB/s to 44MB/s"
> echo 200000 > /sys/block/md0/md/sync_speed_min
> echo 200000 > /sys/block/md1/md/sync_speed_min
> echo 200000 > /sys/block/md2/md/sync_speed_min
> echo 200000 > /sys/block/md3/md/sync_speed_min
> echo 200000 > /sys/block/md4/md/sync_speed_min
> 

Yes, well....

You told it to use up to 200MB/s and the drives are only delivering
44MB/s, so they will be taking nearly all of the available bandwidth.
You shouldn't be too surprised if other things suffer.

NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux