Hi all, First of all, best wishes for 2007, may the Penguin be with you for the whole year on. Then, my problem. 1. The setup : x86_64 2x500GB sata, linux 2.6.18-6, raid 1 on /dev/sd[ab]1 -> /dev/md0. Raid1 is configured with a 1.0 superblock version, but no autoraid 0xfd stuff. The aim is to have / mounted on md0. Lilo has been teached to have root=/dev/md0 and md=0,/dev/sda1,/dev/sdb1, and with an explicit "raid=noautodetect". The rest is not (that) important. 2. The symptoms : At boot time, we do have the correct md: "Loading md0 : /dev/sda1,/dev/sdb1" message but while tryping to add /dev/sda1 in /dev/md0, we have : "md: /dev/sda1 has invalid sb, not importing!" Same thing for /dev/sdb1 3. My guess... I must test this a bit further, but my guess is as follows : - not being autodetected, /dev/md0 device is created using a 0.9 version by default : in md.c: set_array_info(), as info is memset(), info->major_version is zero. - then at md.c: add_new_disk(), md_import_device() is called with mddev->major_version=0. - md_import_device() fails because it's told to load a superblock v0.x and it finds no superblock magic where it looks at it. 4. Conclusions First, is my analysis correct ? The box is being heavily used now (with a non-raid root...), so I can't test any further before tonight, but I may test using a v0.9 superblock, and with autodetect stuff as well... - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
