Hi there!
I have two identical disks sitting on a Promise dual channel IDE
controller. I guess both disks are primary's then.
One of the disks have failed, so I bought a new disk, took out the
failed disk, and put in the new one.
That might seem a little naive, and apparently it was, since the
system won't boot up now.
It boots fine, when only the old, healthy disk is connected.
By the way, all three partitions are raided - including /boot ...
Anyway, I have removed the old disk from the Raid with:
#mdadm /dev/mdo --remove /dev/hde1
#mdadm /dev/md1 --remove /dev/hde2
#mdadm /dev/md2 --remove /dev/hde3
- but the the problem persists.
I can't seem to find a decent 'How-To' - so how it this supposed to
be done?
Thanks in advance!
Martin
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
