Re: addendum: was Re: recovering data on a failed raid-0 installation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



mike.

given the problem, I have a request.


On Friday 31 March 2006 15:55, Mike Hardy wrote:
>
> I can't imagine how to coax a filesystem to work when it's missing half
> it's contents, but maybe a combination of forcing a start on the raid
> and read-only FS mounts could make it hobble along.

we will test any well laid out plan. 

lay out for us (from beginning to end) all the steps required, in your test. 
do not be afraid to detail the obvious. it is better that we be in good 
communication than to be working on assumptions. it will save you a lot of 
frustration trying to correct for our assumptions, if there are none. 

tmh
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux