Re: raid1 w/ 3 active mirrors?

[Laurent CARON <lcaron@xxxxxxxxxx>]

Gordon Mohr (@ Bitzi) a écrit :

> Michael Tokarev wrote:
>
> > Gordon Mohr (@ Bitzi) wrote:
> >
> > > I may have missed this is various docs, but is there any way to make
> > > a raid1 array which has 3 (or more) active mirrors, rather than 2 
> > > mirrors
> > > and spares?
> >
> >
> >
> > On our machines with software raid, I usually use all available disks to
> > create (small) root filesystem on raid1 - which is 2, 3, 4, 5, or even 8
> > on one machine.  There's no special restriction on number of mirrors in
> > a raid1 set.  You create raid1 array on top of N disks exactly the same
> > as you create it on 2 disks.
>
>
> How do you make all the disks active mirrors? When I add a third 
> partition
> to an functioning RAID1 array (mdadm -a), it always enters as a 
> 'spare'. Only
> after another disk fails out will it be brought into sync with the 
> remaining
> active partition.
>
> (I'd like the third partition to be brought into sync, and kept in sync,
> with the other two immediately, so that a fail does not trigger any
> flurry of activity.)
>
> Thanks,
>
> - Gordon @ Bitzi
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

when you create the array:

mdadm -Cv /dev/md0 -l1 -n10 /dev/sd{a,b,c,d,e,f,g,h,i,j}1

--
La morale c'est l'ensemble des règles que l'on trouve excellentes pour
autrui et inutile pour soi.
	-+- Voltaire -+-

-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html