Recompile with piix in the kernel.
danci@xxxxxxxxx wrote:
Hi,
I have 800+ machines all using Linux SW RAID-1. Recent kernels use modules for IDE (piix) and before those modules are loaded, I cannot turn on DMA. So I do this using hdparm from a rc.boot script.
The problem is that usually fails with 'hdX: lost interrupt' if the disks are busy due to RAID reconstruction - which happens a lot as some of the 800+ machines get rebooted for various reasons...
Of course I could be running without DMA (that's what I did on most critical machines), but that is painfully slow and it takes forever just to finish RAID reconstruction.
So I need to know if there is any way (kernel parameter would be ideal) to delay reconstruction for X seconds/minutes?
Any other suggestions to deal with the problem?
Thanks, Danilo - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
--
- To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
