On Thu, 28 Apr 2005 at 4:40pm, Stefan Muenkner wrote > Has anybody experience with the following setup: > > - I would like to set up the two disks as a mirror raid set using the > ATA-Raid card. > - A reasonable portion of the raid-set will then be partionend and used > by windows. > - (Probably) I would actually use a DOS/Win based program to > pre-partition the rest of the mirrored disks for Linux > - the remaining Linux partitions will then be used as a SW-Raid-1 set > (with a LVM on top of it?). If you're willing to pay a bit more, you could buy a "real" RAID card (e.g. a 3ware 8000 series) with support in both OSes. Do a hardware mirror in the 3ware, and then both OSes will see a single drive via their native drivers. A 8006-2 (2 port SATA) is $130 on buy.com. -- Joshua Baker-LePain Department of Biomedical Engineering Duke University - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
