Re: Severe, huge data corruption with softraid

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Michael Tokarev wrote:
[data corruption.. snip]

And finally I managed to get an OOPs.
Created fresh raid5 array out of 4 partitions,
chunk size = 4kb.
Created ext3fs on it.
Tested write speed (direct-io) - it was terrible,
 about 6MB/sec for 64KB blocks - it's very unusual.
Umounted the fs.
Did a direct-write test agains the md device.
And at the same time, did an `rmmod raid0' -
unused in my config at that time. -- not sure
if it's relevant or not.
And get "sigsegv" in my program, and the
following oops:

md: raid0 personality unregistered
Unable to handle kernel paging request at virtual address f8924690
 printing eip:
f8924690
*pde = 02127067
*pte = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: raid10 nfsd exportfs raid5 xor nfs lockd sunrpc 8250 serial_core w83627hf i2c_sensor
i2c_isa i2c_core e1000 genrtc ext3 jbd mbcache raid1 sd_mod md aic79xx scsi_mod
CPU:    1
EIP:    0060:[<f8924690>]    Not tainted VLI
EFLAGS: 00010286   (2.6.9-i686smp-0)
EIP is at 0xf8924690
eax: ecd04028   ebx: c99ead40   ecx: c21dc380   edx: c99ead40
esi: ecd04028   edi: f8924690   ebp: c21dc380   esp: f1d39cac
ds: 007b   es: 007b   ss: 0068
Process dio (pid: 21941, threadinfo=f1d39000 task=f7d40890)
Stack: c015b5dd c99ead40 c10063a0 00001000 00000000 c015b64c 00001000 00000000
       f7d23800 00000000 c01778f2 00000000 f7d23800 c017798d f7d23800 c10063a0
       c0177a4e 00000000 00000001 00000000 f7d2384c f7d23800 c0177e78 00001000
Call Trace:
 [<c015b5dd>] __bio_add_page+0x13d/0x180
 [<c015b64c>] bio_add_page+0x2c/0x40
 [<c01778f2>] dio_bio_add_page+0x22/0x70
 [<c017798d>] dio_send_cur_page+0x4d/0xa0
 [<c0177a4e>] submit_page_section+0x6e/0x140
 [<c0177e78>] do_direct_IO+0x288/0x380
 [<c0178164>] direct_io_worker+0x1f4/0x520
 [<c017869d>] __blockdev_direct_IO+0x20d/0x308
 [<c015d770>] blkdev_get_blocks+0x0/0x70
 [<c015d83f>] blkdev_direct_IO+0x5f/0x80
 [<c015d770>] blkdev_get_blocks+0x0/0x70
 [<c013c304>] generic_file_direct_IO+0x74/0x90
 [<c013b352>] generic_file_direct_write+0x62/0x170
 [<c016f7cb>] inode_update_time+0xbb/0xc0
 [<c013bcfe>] generic_file_aio_write_nolock+0x2ce/0x490
 [<c013bf51>] generic_file_write_nolock+0x91/0xc0
 [<c011ae9e>] scheduler_tick+0x16e/0x470
 [<c0115135>] smp_apic_timer_interrupt+0x85/0xf0
 [<c011c850>] autoremove_wake_function+0x0/0x50
 [<c015e6c0>] blkdev_file_write+0x0/0x30
 [<c015e6e0>] blkdev_file_write+0x20/0x30
 [<c0156770>] vfs_write+0xb0/0x110
 [<c0156897>] sys_write+0x47/0x80
 [<c010603f>] syscall_call+0x7/0xb
Code:  Bad EIP value.

/mjt
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux RAID Wiki]     [ATA RAID]     [Linux SCSI Target Infrastructure]     [Linux Block]     [Linux IDE]     [Linux SCSI]     [Linux Hams]     [Device Mapper]     [Device Mapper Cryptographics]     [Kernel]     [Linux Admin]     [Linux Net]     [GFS]     [RPM]     [git]     [Yosemite Forum]


  Powered by Linux