I am having a problem with auto detection of software raid 5.
I can set up the the raid device, mkfs.ex3, and mount the disk; but at reboot
the raid device is not auto decteced. After the system comes up I can do a
mdadm -A and the raid will assemble and then I can mount it.
One interesting note. I am trying to get the raid system to work on Fedora core
2. But if I boot a Fedora core 3 rescue CD, the raid gets auto detected.
Any help would be very much appreciated.
This post is long, but I will try to give all the information that I see
requested on other posts.
I am running Fedora core 2 with an updated kernel: 2.6.9-1.11_FC2
------------------------- Partition Tables
-----------------------------------------
[root@tv-server root]# fdisk -l /dev/sda
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 2000 16064968+ fd Linux raid autodetect
[root@tv-server root]# fdisk -l /dev/sdb
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 2000 16064968+ fd Linux raid autodetect
[root@tv-server root]# fdisk -l /dev/sdc
Disk /dev/sdc: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 1 2000 16064968+ fd Linux raid autodetect
[root@tv-server root]#
-------------------------- Running mdadm
--------------------------------------------------------------------
[root@tv-server root]# mdadm --create --verbose /dev/md0 --level=5
--raid-devices=3 --chunk=128 /dev/sda1 /dev/sdb1 /dev/sdc1
mdadm: layout defaults to left-symmetric
mdadm: /dev/sda1 appears to contain an ext2fs file system
size=64259584K mtime=Thu Jan 6 05:59:08 2005
mdadm: /dev/sda1 appears to be part of a raid array:
level=5 devices=3 ctime=Thu Jan 6 18:41:48 2005
mdadm: /dev/sdb1 appears to be part of a raid array:
level=5 devices=3 ctime=Thu Jan 6 18:41:48 2005
mdadm: /dev/sdc1 appears to contain an ext2fs file system
size=64259584K mtime=Thu Jan 6 05:59:08 2005
mdadm: /dev/sdc1 appears to be part of a raid array:
level=5 devices=3 ctime=Thu Jan 6 18:41:48 2005
mdadm: size set to 16064896K
Continue creating array? y
mdadm: array /dev/md0 started.
------------------------- Log file from running mdadm
--------------------------------------------------
Jan 6 19:47:20 tv-server kernel: md: bind<sda1>
Jan 6 19:47:20 tv-server kernel: md: bind<sdb1>
Jan 6 19:47:20 tv-server kernel: md: bind<sdc1>
Jan 6 19:47:20 tv-server kernel: raid5: automatically using best checksumming
function: pIII_sse
Jan 6 19:47:20 tv-server kernel: pIII_sse : 3196.000 MB/sec
Jan 6 19:47:20 tv-server kernel: raid5: using function: pIII_sse (3196.000
MB/sec)
Jan 6 19:47:20 tv-server kernel: md: raid5 personality registered as nr 4 Jan
6 19:47:20 tv-server kernel: raid5: device sdb1 operational as raid disk 1 Jan
6 19:47:20 tv-server kernel: raid5: device sda1 operational as raid disk 0 Jan
6 19:47:20 tv-server kernel: raid5: allocated 3166kB for md0 Jan 6 19:47:20
tv-server kernel: raid5: raid level 5 set md0 active with 2 out of 3 devices,
algorithm 2 Jan 6 19:47:20 tv-server kernel: RAID5 conf printout: Jan 6
19:47:20 tv-server kernel: --- rd:3 wd:2 fd:1 Jan 6 19:47:20 tv-server
kernel: disk 0, o:1, dev:sda1 Jan 6 19:47:20 tv-server kernel: disk 1, o:1,
dev:sdb1 Jan 6 19:47:20 tv-server kernel: RAID5 conf printout: Jan 6 19:47:20
tv-server kernel: --- rd:3 wd:2 fd:1 Jan 6 19:47:20 tv-server kernel: disk 0,
o:1, dev:sda1 Jan 6 19:47:20 tv-server kernel: disk 1, o:1, dev:sdb1 Jan 6
19:47:20 tv-server kernel: disk 2, o:1, dev:sdc1 Jan 6 19:47:20 tv-server
kernel: md: syncing RAID array md0 Jan 6 19:47:20 tv-server kernel: md:
minimum _guaranteed_ reconstruction
speed: 1000 KB/sec/disc.
Jan 6 19:47:20 tv-server kernel: md: using maximum available idle IO bandwith
(but not more than 200000 KB/sec) for reconstruction. Jan 6 19:47:20 tv-server
kernel: md: using 128k window, over a total of 16064896 blocks.
. . .
Jan 6 20:06:47 tv-server kernel: md: md0: sync done.
Jan 6 20:06:47 tv-server kernel: RAID5 conf printout:
Jan 6 20:06:47 tv-server kernel: --- rd:3 wd:3 fd:0
Jan 6 20:06:47 tv-server kernel: disk 0, o:1, dev:sda1
Jan 6 20:06:47 tv-server kernel: disk 1, o:1, dev:sdb1
Jan 6 20:06:47 tv-server kernel: disk 2, o:1, dev:sdc1
-------------------------------------- Making file system and mounting
---------------------------------------------------------
[root@tv-server root]# mkfs.ext3 /dev/md0
mke2fs 1.35 (28-Feb-2004)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
4022592 inodes, 8032448 blocks
401622 blocks (5.00%) reserved for the super user
First data block=0
246 block groups
32768 blocks per group, 32768 fragments per group
16352 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 24 mounts or 180 days,
whichever comes first. Use tune2fs -c or -i to override.
[root@tv-server root]# mount /md0
[root@tv-server root]#
------------------------------------- Rebooted system
-------------------------------------------------------
At this point there is no /dev/md0
But a mdadm -A reassembles the raid device
mdadm -A --verbose /dev/md0 /dev/sda1 /dev/sdb1 /dev/sdc1
mdadm: looking for devices for /dev/md0
mdadm: /dev/sda1 is identified as a member of /dev/md0, slot 0.
mdadm: /dev/sdb1 is identified as a member of /dev/md0, slot 1.
mdadm: /dev/sdc1 is identified as a member of /dev/md0, slot 2.
mdadm: added /dev/sdb1 to /dev/md0 as 1
mdadm: added /dev/sdc1 to /dev/md0 as 2
mdadm: added /dev/sda1 to /dev/md0 as 0
mdadm: /dev/md0 has been started with 3 drives.
[root@tv-server root]#
[root@tv-server root]#
[root@tv-server root]# vi /etc/fstab
[root@tv-server root]#
[root@tv-server root]# mount /md0
[root@tv-server root]#
---------------------------------- Compleate dmesg from reboot
-------------------------------------------------------------------------
3CM] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. Linux Plug and
Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LAPU] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LACI] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:01:0a.1[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [L3CM] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 11 (level, low) -> IRQ 11
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1105043267.652:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key DD066BD18199F20B
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xd8000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled ttyS0
at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo Uniform
Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE
interface ide0...
hda: MAXTOR 6L080J4, ATA DISK drive
hdb: SAMSUNG SV1204H, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PLEXTOR CD-R PX-W2410A, ATAPI CD/DVD-ROM drive
hdd: SAMSUNG SV1204H, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
hdb: max request size: 128KiB
hdb: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1
hdd: max request size: 128KiB
hdd: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hdd: cache flushes supported
hdd: hdd1
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33) Uniform CD-ROM
driver Revision: 3.20 ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362) Initializing IPsec
netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S4bios S5)
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
libata version 1.02 loaded.
sata_sil version 0.54
ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 11 (level, low) -> IRQ 11
ata1: SATA max UDMA/100 cmd 0xE081C080 ctl 0xE081C08A bmdma 0xE081C000 irq 11
ata2: SATA max UDMA/100 cmd 0xE081C0C0 ctl 0xE081C0CA bmdma 0xE081C008 irq 11
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: no device found (phy stat 00000000)
scsi1 : sata_sil
Vendor: ATA Model: ST3160827AS Rev: 3.42
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda:
drive cache: write back
sda: sda1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 5 (level, low) -> IRQ 5
ata3: SATA max UDMA/100 cmd 0xE081E080 ctl 0xE081E08A bmdma 0xE081E000 irq 5
ata4: SATA max UDMA/100 cmd 0xE081E0C0 ctl 0xE081E0CA bmdma 0xE081E008 irq 5
ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:007f
ata3: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
ata3(0): applying Seagate errata fix
ata3: dev 0 configured for UDMA/100
scsi2 : sata_sil
ata4: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:007f
ata4: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
ata4(0): applying Seagate errata fix
ata4: dev 0 configured for UDMA/100
scsi3 : sata_sil
Vendor: ATA Model: ST3160023AS Rev: 3.05
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb:
drive cache: write back
sdb: sdb1
Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Vendor: ATA Model: ST3160023AS Rev: 3.05
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdc:
drive cache: write back
sdc: sdc1
Attached scsi disk sdc at scsi3, channel 0, id 0, lun 0 kjournald starting.
Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 148k freed
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
ACPI: Power Button (FF) [PWRF]
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd
0000:00:02.2: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2:
irq 5, pci mem e0836000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned
bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd
0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB
hub found hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd
0000:00:02.0: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0:
irq 11, pci mem e083e000 ohci_hcd 0000:00:02.0: new USB bus registered,
assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd
0000:00:02.1: OHCI Host Controller
PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1:
irq 11, pci mem e086c000 ohci_hcd 0000:00:02.1: new USB bus registered,
assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected
EXT3 FS on hda5, internal journal
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@xxxxxxxxxxxxxx
cdrom: open failed.
Adding 1048312k swap on /dev/hda3. Priority:-1 extents:1 kjournald starting.
Commit interval 5 seconds EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdd1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached
scsi generic sg1 at scsi2, channel 0, id 0, lun 0, type 0 Attached scsi
generic sg2 at scsi3, channel 0, id 0, lun 0, type 0 inserting floppy driver
for 2.6.9-1.11_FC2 FDC 0 is a post-1991 82077
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@xxxxxxxxxx>
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e3084000-e30847ff] Max
Packet=[2048]
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:01.0: 3Com PCI 3c920 Tornado at 0xc000. Vers LK1.1.19
divert: allocating divert_blk for eth0
CSLIP: code copyright 1989 Regents of the University of California ISDN
subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1
HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0)
HiSax: DSS1 Rev. 2.32.2.3
HiSax: 2 channels added
HiSax: MAX_WAITING_CALLS added
ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 11 (level, low) -> IRQ 11
hisax_fcpcipnp: found adapter Fritz!Card PCI v2 at 0000:01:09.0
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:04.0 to 64
divert: allocating divert_blk for eth1
eth1: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
divert: freeing divert_blk for eth0
HiSax module removed
ISDN-subsystem unloaded
divert: freeing divert_blk for eth1
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:01.0: 3Com PCI 3c920 Tornado at 0xc000. Vers LK1.1.19
divert: allocating divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:04.0 to 64
divert: allocating divert_blk for eth1
eth1: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
eth1: no link during initialization.
eth1: link up.
ip_tables: (C) 2000-2002 Netfilter core team
CSLIP: code copyright 1989 Regents of the University of California PPP generic
driver version 2.4.2
divert: not allocating divert_blk for non-ethernet device ppp0
NET: Registered protocol family 10
Disabled Privacy Extensions on device c036c5e0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present
eth1: no IPv6 routers present
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
