Hi!
I'm using several Intel server boards with ServerWorks CSB5 chipset for
IDE. Even though this chipset is supposed to support ATA100 and it is
supposed to be supported in Linux and I do have CONFIG_BLK_DEV_SVWKS=y in
my .config, I can't set speeds higher than 'hdparm -X66 /dev/hda'!
This is what I get in my dmesg:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ServerWorks CSB5: IDE controller on PCI bus 00 dev 79
ServerWorks CSB5: chipset revision 147
ServerWorks CSB5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2840-0x2847, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2848-0x284f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L060AVER07-0, ATA DISK drive
hdc: IC35L060AVER07-0, ATA DISK drive
hdd: SONY CD-ROM CDU523 1, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=7476/255/63, UDMA(33)
hdc: 120103200 sectors (61493 MB) w/1916KiB Cache, CHS=7476/255/63, UDMA(33)
Is it just me or is someone else having the same problem?
Thanks, D.
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
