Re: Bluetooth HSP and HFP support in pulseaudio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 28 April 2020 21:52:55 Georg Chini wrote:
> On 28.04.20 21:06, Pali Rohár wrote:
> > On Tuesday 28 April 2020 20:50:33 Georg Chini wrote:
> > > Personally I don't see a problem to remove the AG role support from
> > > the ofono backend because nobody uses it. What I proposed earlier
> > > - allow hsphfpd to disable the HFP HS role and keep a "legacy" ofono
> > > backend for the HFP HS role - should not be that hard to implement
> > > compared to all the time and work you already invested and it would
> > > help us to keep users happy.
> > As I said, I have no problems with allowing to disable particular
> > profile from hsphpfd. But the way how ofono has it implemented, when it
> > is not possible to unregister specific profile and it always register
> > master SCO listening socket, it means that you cannot have two
> > applications which would implement or register HSP or HFP profile for
> > audio, independently of the role.
> > 
> > So you cannot use ofono's HFP AG role for connecting mobile phone and
> > other application (e.g. hsphpfd) for using HFP HS role for connecting
> > headset.
> Sorry, forgive my ignorance. You can switch off ofonos AG role,
> in that case it will only register the HS role with bluetoothd and
> only react to connection attempts with the specific UUID.
> Is it not possible that ofono registers one role and hsphfpd the
> other?

Via --noplugin you specify which ofono plugins would not be loaded. So
you can instruct ofono to not register HF or AG role of HFP to
bluetoothd, which cause that bluetoothd does not create new RFCOMM
connection for particular profile UUID. So registering / unregistering
of UUIF can be done by restarting ofono with different parameters.

But for HSP and HFP this is not enough! SCO listening master socket is
created by ofono if at least one of HF or AG role plugin is loaded. And
you cannot control this behavior as ofono does not have API for it.

> And even if it is not possible and you can't use both at the same
> time (which would be a pity)

No it is not possible. It is even not possible to have one application
with HSP HS and one with HFP AG (see difference HSP and HFP, even
different profile is not possible).

As I wrote is exactly same as if two applications want to listen on TCP
port 1234 and both applications wants to accept only socket with
specific parameters which can be deduced only after accepting socket.

SCO sockets are not managed by bluetoothd daemon, but by target agent
application which implements that particular profile.

> we still have to respect if a user
> thinks that for him a working implementation for his mobile is
> more important than good headset support and therefore prefers
> the ofono backend over any other backend.
> > 
> > So what you want is currently impossible. You have to first fix ofono
> > daemon, design and export API for it and then implement other side to
> > use that API.
> > 
> > And I'm explaining again that this is reason why to have one central
> > daemon which would implement HSP and HFP profiles and proxies needed
> > support / sockets to target applications.
> > 
> > If one application is stealing listening sockets and cannot be
> > configured to not do it, other applications are just out of luck.
> > 
> > It is same as if two UDP or TCP applications wants to listen on port
> > 1234 and both want to accept new connections. Without full cooperative
> > environment it does not work. hsphfpd daemon is there to accept new
> > connections from both RFCOMM and SCO sockets and do all needed stuff
> > with it (pass to other application, or process data on it directly).
> > 
> The point is, that the applications that support the new hsphfpd
> not yet exist, so we have at least to support the status quo until
> there is some alternative.

Are there other modem softwares? I can write e.g. simple application for
hsphfpd which exports socket as tty device (via pts kernel interface).
If there are working modem software which can use tty modem then could
access also modem exported in this way.

-- 
Pali Rohár
pali.rohar@xxxxxxxxx
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss




[Index of Archives]     [Linux Audio Users]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux