Hello! My A2DP patch series which adds support for more A2DP codecs is still in review state, but Tanu about year ago wrote that do not like my proposal with usage of PA profiles for selecting A2DP codec. Because nobody for last year come up with another option how to solve this problem and because without it is not possible to add support for other codecs it means that pulseaudio is stucked and has no way to improve A2DP support. So here I'm adding another proposal how to handle multi-codec support for bluetooth in pulseaudio. But first description of our problem: Currently we have following profiles for bluetooth card: * headset_audio_gateway * headset_head_unit * a2dp_source * a2dp_sink If we look at HW level of HSP/HFP profiles they may supports following codecs: CVSD, mSBC, AuriStream. All are bidirectional, synchronous. Moreover encoding from PCM stream to codec data may be done at HW level (bluetooth adapter) or on SW level (pulseaudio). Currently encoding to CVSD is done at HW level and encoding to mSBC at SW level. But e.g. new Thinkpads has bluetooth adapters which can do mSBC-encoding at HW level and theoretically pulseaudio could just pass PCM samples to BT without need to use any software sbc encoding library (*). And if we look at A2DP profiles it is quite a bit complicated. Every "A2DP codec" is either one-way (source or sink) or is bi-directional (but it is rare and most devices does not support them). Plus every "A2DP codec" may support more "codec profiles", so e.g. we have SBC-MQ or SBC-HQ. And bidirectional "A2DP codecs" may use different "audio codec" for one directional and different for back directional (e.g. A2DP codec aptX-LL uses aptX codec for playing and SBC codec for recording). Result is: "SBC" codec is supported in "headset_head_unit" PA profile (as mSBC"), it is supported also in "a2dp_sink" PA profile when "A2DP SBC" codec is used and also in "a2dp_source" PA profile when "aptX-LL" codec is used. So adding a new API which sets codec on PA bluetooth card is not enough. I would propose following API: Add support for pulseaudio "sub-profiles". For every pulseaudio profile it would be possible to register sub-profile and applications via pulseaudio API would be able to change sub-profile of some PA card (if currently selected PA profile would support it). Plus adds a two new profiles: * a2dp_source_with_backchannel * a2dp_sink_with_backchannel For music playback in most cases is useful only profiles without backchannel to maximize bandwidth. And because A2DP codecs with bachannel does not fit into HSP profiles it make sense to have them in separate profile. In most cases A2DP profile with backchannel is the best way for VOIP (as it has microphone recording support), so bluetooth policy plugin would be extended to use also this profile for VOIP. Sub-profiles for bluetooth PA card would be following: * headset_audio_gateway - CVSD (hardware) - mSBC (software) - mSBC (hardware) ... * headset_head_unit - same as in headset_audio_gateway * a2dp_source - SBC-LQ - SBC-MQ - SBC-HQ .., - faststream without backchannel - aptX - aptX-HD - aptX-LL without backannel - LDAC ... * a2dp_sink - same as in a2dp_source * a2dp_source_with_backchannel - faststream with backchannel - aptX-LL with backchannel * a2dp_sink_with_backchannel - same as in a2dp_source_with_backchannel So sub-profile would be one specific configuration of codec. In HSP/HFP there would be two sub-profiles for every codec (one for software encoding, one for hardware encoding). In A2DP it may be various. E.g. for "SBC profiles" there would be one sub-profile for every SBC configuration. For faststream codec there would be two, one with backchannel, one without. Default sub-codec selection would be up to the pulseaudio module. And applications (pactl / pavucontrol / ...) would be able to change PA sub-profile in similar way how they can do it for PA profiles. Of course some sub-profiles does not have to be supported (e.g. mSBC in hardware encoding) and in these cases pulseaudio would not announce these unsupported sub-profiles. What do you think about this my proposal? Tanu, is this acceptable for you? Basically it is needed only to add APIs for applications to: * get current sub-profile of card * get list of all sub-profiles for specific profile * change sub-profile of card I'm not saying how would API look like. I'm open for implementation details... I can imagine that we can extend PA protocol or use messaging API for it or anything else... (*) - currently Linux kernel blocks this usage of mSBC HW encoding and force userspace to do whole encoding at application level (in pulseaudio). -- Pali Rohár pali.rohar@xxxxxxxxx
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
