Re: [PATCH v13 05/10] bluetooth: Add A2DP aptX and aptX HD codecs support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



both libraries are comming from the same reverse-engineering of a PROPRIETARY PATENTED codec, and BOTH are subject to lawsuit in case it is widely distributed as binary. 

JP

07.10.2019, 10:06, "Pali Rohár" <pali.rohar@xxxxxxxxx>:
> But that is something different. Look at commit message where is link to
> correct library for building.
>
> On Monday 07 October 2019 10:05:52 Hyperion wrote:
>>  Sorry, I should have provided the link to the source GIT https://github.com/Arkq/openaptx
>>
>>  JP
>>
>>  07.10.2019, 09:51, "Pali Rohár" <pali.rohar@xxxxxxxxx>:
>>  > On Monday 07 October 2019 09:47:21 Hyperion wrote:
>>  >>  Quotig OpenAPTX Github README :
>>  >>  "This project is for research purposes only. Without a proper license private and commercial usage might be a case of a patent infringement. If you are looking for a library, which can be installed and used legally (commercial, private and educational usage), go to the Qualcomm® aptX™ homepage and contact Qualcomm customer service."
>>  >
>>  > Sorry, but I have not found any such quotes in README file.
>>  >
>>  >>  So APTX support MUST only be provided for researching purposes, and so it should remain an external patch, out of the main PA tree.
>>  >>
>>  >>  All the best,
>>  >>
>>  >>  The source code itself is licensed under the terms of the MIT license. However, compression algorithms are patented and licensed under the terms of a proprietary license. Hence, compilation and redistribution in a binary format is forbidden!
>>  >
>>  > Library is fully licensed under LGPLv2.1+, not under MIT. And there are
>>  > no proprietary parts. Maybe you are referring to different library?
>>  >
>>  >>  06.10.2019, 19:59, "Pali Rohár" <pali.rohar@xxxxxxxxx>:
>>  >>  > This patch provides support for aptX and aptX HD codecs in bluetooth A2DP
>>  >>  > profile. It uses open source LGPLv2.1+ licensed libopenaptx library which
>>  >>  > can be found at https://github.com/pali/libopenaptx.
>>  >>  >
>>  >>  > aptX for s24 stereo samples provides fixed 6:1 compression ratio and
>>  >>  > bitrate 352.8 kbit/s, aptX HD provides fixed 4:1 compression ratio and
>>  >>  > bitrate 529.2 kbit/s.
>>  >>  >
>>  >>  > According to soundexpert research, aptX codec used in bluetooth A2DP is no
>>  >>  > better than SBC High Quality settings. And you cannot hear difference
>>  >>  > between aptX and SBC High Quality, aptX is just a copper-less overpriced
>>  >>  > audio cable.
>>  >>  >
>>  >>  > aptX HD is high-bitrate version of aptX. It has clearly noticeable increase
>>  >>  > in sound quality (not dramatic though taking into account the increase in
>>  >>  > bitrate).
>>  >>  >
>>  >>  > http://soundexpert.org/news/-/blogs/audio-quality-of-bluetooth-aptx
>>  >>  > ---
>>  >>  >  configure.ac | 36 +++
>>  >>  >  src/Makefile.am | 6 +
>>  >>  >  src/modules/bluetooth/a2dp-codec-aptx.c | 479 ++++++++++++++++++++++++++++++++
>>  >>  >  src/modules/bluetooth/a2dp-codec-util.c | 8 +
>>  >>  >  4 files changed, 529 insertions(+)
>>  >>  >  create mode 100644 src/modules/bluetooth/a2dp-codec-aptx.c
>>  >>  >
>>  >>  > diff --git a/configure.ac b/configure.ac
>>  >>  > index 8278353d4..26c625a59 100644
>>  >>  > --- a/configure.ac
>>  >>  > +++ b/configure.ac
>>  >>  > @@ -1118,6 +1118,40 @@ AC_SUBST(HAVE_BLUEZ_5_NATIVE_HEADSET)
>>  >>  >  AM_CONDITIONAL([HAVE_BLUEZ_5_NATIVE_HEADSET], [test "x$HAVE_BLUEZ_5_NATIVE_HEADSET" = x1])
>>  >>  >  AS_IF([test "x$HAVE_BLUEZ_5_NATIVE_HEADSET" = "x1"], AC_DEFINE([HAVE_BLUEZ_5_NATIVE_HEADSET], 1, [Bluez 5 native headset backend enabled]))
>>  >>  >
>>  >>  > +#### Bluetooth A2DP aptX codec (optional) ###
>>  >>  > +
>>  >>  > +AC_ARG_ENABLE([aptx],
>>  >>  > + AS_HELP_STRING([--disable-aptx],[Disable optional bluetooth A2DP aptX and aptX HD codecs support (via libopenaptx)]))
>>  >>  > +AC_ARG_VAR([OPENAPTX_CPPFLAGS], [C preprocessor flags for openaptx])
>>  >>  > +AC_ARG_VAR([OPENAPTX_LDFLAGS], [linker flags for openaptx])
>>  >>  > +
>>  >>  > +CPPFLAGS_SAVE="$CPPFLAGS"
>>  >>  > +LDFLAGS_SAVE="$LDFLAGS"
>>  >>  > +LIBS_SAVE="$LIBS"
>>  >>  > +
>>  >>  > +CPPFLAGS="$CPPFLAGS $OPENAPTX_CPPFLAGS"
>>  >>  > +LDFLAGS="$LDFLAGS $OPENAPTX_LDFLAGS"
>>  >>  > +
>>  >>  > +AS_IF([test "x$HAVE_BLUEZ_5" = "x1" && test "x$enable_aptx" != "xno"],
>>  >>  > + [AC_CHECK_HEADER([openaptx.h],
>>  >>  > + [AC_SEARCH_LIBS([aptx_init], [openaptx],
>>  >>  > + [HAVE_OPENAPTX=1; AS_IF([test "x$ac_cv_search_aptx_init" != "xnone required"], [OPENAPTX_LDFLAGS="$OPENAPTX_LDFLAGS $ac_cv_search_aptx_init"])],
>>  >>  > + [HAVE_OPENAPTX=0])],
>>  >>  > + [HAVE_OPENAPTX=0])])
>>  >>  > +
>>  >>  > +CPPFLAGS="$CPPFLAGS_SAVE"
>>  >>  > +LDFLAGS="$LDFLAGS_SAVE"
>>  >>  > +LIBS="$LIBS_SAVE"
>>  >>  > +
>>  >>  > +AS_IF([test "x$HAVE_BLUEZ_5" = "x1" && test "x$enable_aptx" = "xyes" && test "x$HAVE_OPENAPTX" = "x0"],
>>  >>  > + [AC_MSG_ERROR([*** libopenaptx from https://github.com/pali/libopenaptx not found])])
>>  >>  > +
>>  >>  > +AC_SUBST(OPENAPTX_CPPFLAGS)
>>  >>  > +AC_SUBST(OPENAPTX_LDFLAGS)
>>  >>  > +AC_SUBST(HAVE_OPENAPTX)
>>  >>  > +AM_CONDITIONAL([HAVE_OPENAPTX], [test "x$HAVE_OPENAPTX" = "x1"])
>>  >>  > +AS_IF([test "x$HAVE_OPENAPTX" = "x1"], AC_DEFINE([HAVE_OPENAPTX], 1, [Have openaptx codec library]))
>>  >>  > +
>>  >>  >  #### UDEV support (optional) ####
>>  >>  >
>>  >>  >  AC_ARG_ENABLE([udev],
>>  >>  > @@ -1603,6 +1637,7 @@ AS_IF([test "x$HAVE_SYSTEMD_JOURNAL" = "x1"], ENABLE_SYSTEMD_JOURNAL=yes, ENABLE
>>  >>  >  AS_IF([test "x$HAVE_BLUEZ_5" = "x1"], ENABLE_BLUEZ_5=yes, ENABLE_BLUEZ_5=no)
>>  >>  >  AS_IF([test "x$HAVE_BLUEZ_5_OFONO_HEADSET" = "x1"], ENABLE_BLUEZ_5_OFONO_HEADSET=yes, ENABLE_BLUEZ_5_OFONO_HEADSET=no)
>>  >>  >  AS_IF([test "x$HAVE_BLUEZ_5_NATIVE_HEADSET" = "x1"], ENABLE_BLUEZ_5_NATIVE_HEADSET=yes, ENABLE_BLUEZ_5_NATIVE_HEADSET=no)
>>  >>  > +AS_IF([test "x$HAVE_OPENAPTX" = "x1"], ENABLE_APTX=yes, ENABLE_APTX=no)
>>  >>  >  AS_IF([test "x$HAVE_HAL_COMPAT" = "x1"], ENABLE_HAL_COMPAT=yes, ENABLE_HAL_COMPAT=no)
>>  >>  >  AS_IF([test "x$HAVE_TCPWRAP" = "x1"], ENABLE_TCPWRAP=yes, ENABLE_TCPWRAP=no)
>>  >>  >  AS_IF([test "x$HAVE_LIBSAMPLERATE" = "x1"], ENABLE_LIBSAMPLERATE="yes (DEPRECATED)", ENABLE_LIBSAMPLERATE=no)
>>  >>  > @@ -1661,6 +1696,7 @@ echo "
>>  >>  >        Enable BlueZ 5: ${ENABLE_BLUEZ_5}
>>  >>  >          Enable ofono headsets: ${ENABLE_BLUEZ_5_OFONO_HEADSET}
>>  >>  >          Enable native headsets: ${ENABLE_BLUEZ_5_NATIVE_HEADSET}
>>  >>  > + Enable aptX+aptXHD codecs: ${ENABLE_APTX}
>>  >>  >      Enable udev: ${ENABLE_UDEV}
>>  >>  >        Enable HAL->udev compat: ${ENABLE_HAL_COMPAT}
>>  >>  >      Enable systemd
>>  >>  > diff --git a/src/Makefile.am b/src/Makefile.am
>>  >>  > index b84c778cc..e317b7972 100644
>>  >>  > --- a/src/Makefile.am
>>  >>  > +++ b/src/Makefile.am
>>  >>  > @@ -2164,6 +2164,12 @@ libbluez5_util_la_SOURCES += modules/bluetooth/a2dp-codec-sbc.c
>>  >>  >  libbluez5_util_la_LIBADD += $(SBC_LIBS)
>>  >>  >  libbluez5_util_la_CFLAGS += $(SBC_CFLAGS)
>>  >>  >
>>  >>  > +if HAVE_OPENAPTX
>>  >>  > +libbluez5_util_la_SOURCES += modules/bluetooth/a2dp-codec-aptx.c
>>  >>  > +libbluez5_util_la_CPPFLAGS += $(OPENAPTX_CPPFLAGS)
>>  >>  > +libbluez5_util_la_LDFLAGS += $(OPENAPTX_LDFLAGS)
>>  >>  > +endif
>>  >>  > +
>>  >>  >  module_bluez5_discover_la_SOURCES = modules/bluetooth/module-bluez5-discover.c
>>  >>  >  module_bluez5_discover_la_LDFLAGS = $(MODULE_LDFLAGS)
>>  >>  >  module_bluez5_discover_la_LIBADD = $(MODULE_LIBADD) $(DBUS_LIBS) libbluez5-util.la
>>  >>  > diff --git a/src/modules/bluetooth/a2dp-codec-aptx.c b/src/modules/bluetooth/a2dp-codec-aptx.c
>>  >>  > new file mode 100644
>>  >>  > index 000000000..2bd9e7652
>>  >>  > --- /dev/null
>>  >>  > +++ b/src/modules/bluetooth/a2dp-codec-aptx.c
>>  >>  > @@ -0,0 +1,479 @@
>>  >>  > +/***
>>  >>  > + This file is part of PulseAudio.
>>  >>  > +
>>  >>  > + Copyright 2018-2019 Pali Rohár <pali.rohar@xxxxxxxxx>
>>  >>  > +
>>  >>  > + PulseAudio is free software; you can redistribute it and/or modify
>>  >>  > + it under the terms of the GNU Lesser General Public License as
>>  >>  > + published by the Free Software Foundation; either version 2.1 of the
>>  >>  > + License, or (at your option) any later version.
>>  >>  > +
>>  >>  > + PulseAudio is distributed in the hope that it will be useful, but
>>  >>  > + WITHOUT ANY WARRANTY; without even the implied warranty of
>>  >>  > + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>>  >>  > + General Public License for more details.
>>  >>  > +
>>  >>  > + You should have received a copy of the GNU Lesser General Public
>>  >>  > + License along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
>>  >>  > +***/
>>  >>  > +
>>  >>  > +#ifdef HAVE_CONFIG_H
>>  >>  > +#include <config.h>
>>  >>  > +#endif
>>  >>  > +
>>  >>  > +#include <pulsecore/log.h>
>>  >>  > +#include <pulsecore/macro.h>
>>  >>  > +#include <pulsecore/once.h>
>>  >>  > +#include <pulse/sample.h>
>>  >>  > +
>>  >>  > +#include <arpa/inet.h>
>>  >>  > +
>>  >>  > +#include <openaptx.h>
>>  >>  > +
>>  >>  > +#include "a2dp-codecs.h"
>>  >>  > +#include "a2dp-codec-api.h"
>>  >>  > +#include "rtp.h"
>>  >>  > +
>>  >>  > +struct aptx_hd_info {
>>  >>  > + struct aptx_context *aptx_c;
>>  >>  > + uint16_t seq_num;
>>  >>  > +};
>>  >>  > +
>>  >>  > +static bool can_accept_capabilities_common(const a2dp_aptx_t *capabilities, uint32_t vendor_id, uint16_t codec_id) {
>>  >>  > + if (A2DP_GET_VENDOR_ID(capabilities->info) != vendor_id || A2DP_GET_CODEC_ID(capabilities->info) != codec_id)
>>  >>  > + return false;
>>  >>  > +
>>  >>  > + if (!(capabilities->frequency & (APTX_SAMPLING_FREQ_16000 | APTX_SAMPLING_FREQ_32000 |
>>  >>  > + APTX_SAMPLING_FREQ_44100 | APTX_SAMPLING_FREQ_48000)))
>>  >>  > + return false;
>>  >>  > +
>>  >>  > + if (!(capabilities->channel_mode & APTX_CHANNEL_MODE_STEREO))
>>  >>  > + return false;
>>  >>  > +
>>  >>  > + return true;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static bool can_accept_capabilities(const uint8_t *capabilities_buffer, uint8_t capabilities_size, bool for_encoding) {
>>  >>  > + const a2dp_aptx_t *capabilities = (const a2dp_aptx_t *) capabilities_buffer;
>>  >>  > +
>>  >>  > + if (capabilities_size != sizeof(*capabilities))
>>  >>  > + return false;
>>  >>  > +
>>  >>  > + return can_accept_capabilities_common(capabilities, APTX_VENDOR_ID, APTX_CODEC_ID);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static bool can_accept_capabilities_hd(const uint8_t *capabilities_buffer, uint8_t capabilities_size, bool for_encoding) {
>>  >>  > + const a2dp_aptx_hd_t *capabilities = (const a2dp_aptx_hd_t *) capabilities_buffer;
>>  >>  > +
>>  >>  > + if (capabilities_size != sizeof(*capabilities))
>>  >>  > + return false;
>>  >>  > +
>>  >>  > + return can_accept_capabilities_common(&capabilities->aptx, APTX_HD_VENDOR_ID, APTX_HD_CODEC_ID);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static const char *choose_remote_endpoint_common(bool (*can_accept_capabilities_func)(const uint8_t *, uint8_t, bool), const pa_hashmap *capabilities_hashmap, bool for_encoding) {
>>  >>  > + const pa_a2dp_codec_capabilities *a2dp_capabilities;
>>  >>  > + const char *key;
>>  >>  > + void *state;
>>  >>  > +
>>  >>  > + /* There is no preference, just choose random valid entry */
>>  >>  > + PA_HASHMAP_FOREACH_KV(key, a2dp_capabilities, capabilities_hashmap, state) {
>>  >>  > + if (can_accept_capabilities_func(a2dp_capabilities->buffer, a2dp_capabilities->size, for_encoding))
>>  >>  > + return key;
>>  >>  > + }
>>  >>  > +
>>  >>  > + return NULL;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static const char *choose_remote_endpoint(const pa_hashmap *capabilities_hashmap, const pa_sample_spec *default_sample_spec, bool for_encoding) {
>>  >>  > + return choose_remote_endpoint_common(can_accept_capabilities, capabilities_hashmap, for_encoding);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static const char *choose_remote_endpoint_hd(const pa_hashmap *capabilities_hashmap, const pa_sample_spec *default_sample_spec, bool for_encoding) {
>>  >>  > + return choose_remote_endpoint_common(can_accept_capabilities_hd, capabilities_hashmap, for_encoding);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static void fill_capabilities_common(a2dp_aptx_t *capabilities, uint32_t vendor_id, uint16_t codec_id) {
>>  >>  > + capabilities->info = A2DP_SET_VENDOR_ID_CODEC_ID(vendor_id, codec_id);
>>  >>  > + capabilities->channel_mode = APTX_CHANNEL_MODE_STEREO;
>>  >>  > + capabilities->frequency = APTX_SAMPLING_FREQ_16000 | APTX_SAMPLING_FREQ_32000 |
>>  >>  > + APTX_SAMPLING_FREQ_44100 | APTX_SAMPLING_FREQ_48000;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static uint8_t fill_capabilities(uint8_t capabilities_buffer[MAX_A2DP_CAPS_SIZE]) {
>>  >>  > + a2dp_aptx_t *capabilities = (a2dp_aptx_t *) capabilities_buffer;
>>  >>  > +
>>  >>  > + pa_zero(*capabilities);
>>  >>  > + fill_capabilities_common(capabilities, APTX_VENDOR_ID, APTX_CODEC_ID);
>>  >>  > + return sizeof(*capabilities);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static uint8_t fill_capabilities_hd(uint8_t capabilities_buffer[MAX_A2DP_CAPS_SIZE]) {
>>  >>  > + a2dp_aptx_hd_t *capabilities = (a2dp_aptx_hd_t *) capabilities_buffer;
>>  >>  > +
>>  >>  > + pa_zero(*capabilities);
>>  >>  > + fill_capabilities_common(&capabilities->aptx, APTX_HD_VENDOR_ID, APTX_HD_CODEC_ID);
>>  >>  > + return sizeof(*capabilities);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static bool is_configuration_valid_common(const a2dp_aptx_t *config, uint32_t vendor_id, uint16_t codec_id) {
>>  >>  > + if (A2DP_GET_VENDOR_ID(config->info) != vendor_id || A2DP_GET_CODEC_ID(config->info) != codec_id) {
>>  >>  > + pa_log_error("Invalid vendor codec information in configuration");
>>  >>  > + return false;
>>  >>  > + }
>>  >>  > +
>>  >>  > + if (config->frequency != APTX_SAMPLING_FREQ_16000 && config->frequency != APTX_SAMPLING_FREQ_32000 &&
>>  >>  > + config->frequency != APTX_SAMPLING_FREQ_44100 && config->frequency != APTX_SAMPLING_FREQ_48000) {
>>  >>  > + pa_log_error("Invalid sampling frequency in configuration");
>>  >>  > + return false;
>>  >>  > + }
>>  >>  > +
>>  >>  > + if (config->channel_mode != APTX_CHANNEL_MODE_STEREO) {
>>  >>  > + pa_log_error("Invalid channel mode in configuration");
>>  >>  > + return false;
>>  >>  > + }
>>  >>  > +
>>  >>  > + return true;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static bool is_configuration_valid(const uint8_t *config_buffer, uint8_t config_size) {
>>  >>  > + const a2dp_aptx_t *config = (const a2dp_aptx_t *) config_buffer;
>>  >>  > +
>>  >>  > + if (config_size != sizeof(*config)) {
>>  >>  > + pa_log_error("Invalid size of config buffer");
>>  >>  > + return false;
>>  >>  > + }
>>  >>  > +
>>  >>  > + return is_configuration_valid_common(config, APTX_VENDOR_ID, APTX_CODEC_ID);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static bool is_configuration_valid_hd(const uint8_t *config_buffer, uint8_t config_size) {
>>  >>  > + const a2dp_aptx_hd_t *config = (const a2dp_aptx_hd_t *) config_buffer;
>>  >>  > +
>>  >>  > + if (config_size != sizeof(*config)) {
>>  >>  > + pa_log_error("Invalid size of config buffer");
>>  >>  > + return false;
>>  >>  > + }
>>  >>  > +
>>  >>  > + return is_configuration_valid_common(&config->aptx, APTX_HD_VENDOR_ID, APTX_HD_CODEC_ID);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static bool fill_preferred_configuration_common(const pa_sample_spec *default_sample_spec, const a2dp_aptx_t *capabilities, a2dp_aptx_t *config, uint32_t vendor_id, uint16_t codec_id) {
>>  >>  > + int i;
>>  >>  > +
>>  >>  > + static const struct {
>>  >>  > + uint32_t rate;
>>  >>  > + uint8_t cap;
>>  >>  > + } freq_table[] = {
>>  >>  > + { 16000U, APTX_SAMPLING_FREQ_16000 },
>>  >>  > + { 32000U, APTX_SAMPLING_FREQ_32000 },
>>  >>  > + { 44100U, APTX_SAMPLING_FREQ_44100 },
>>  >>  > + { 48000U, APTX_SAMPLING_FREQ_48000 }
>>  >>  > + };
>>  >>  > +
>>  >>  > + if (A2DP_GET_VENDOR_ID(capabilities->info) != vendor_id || A2DP_GET_CODEC_ID(capabilities->info) != codec_id) {
>>  >>  > + pa_log_error("No supported vendor codec information");
>>  >>  > + return false;
>>  >>  > + }
>>  >>  > +
>>  >>  > + config->info = A2DP_SET_VENDOR_ID_CODEC_ID(vendor_id, codec_id);
>>  >>  > +
>>  >>  > + if (!(capabilities->channel_mode & APTX_CHANNEL_MODE_STEREO)) {
>>  >>  > + pa_log_error("No supported channel modes");
>>  >>  > + return false;
>>  >>  > + }
>>  >>  > +
>>  >>  > + config->channel_mode = APTX_CHANNEL_MODE_STEREO;
>>  >>  > +
>>  >>  > + /* Find the lowest freq that is at least as high as the requested sampling rate */
>>  >>  > + for (i = 0; (unsigned) i < PA_ELEMENTSOF(freq_table); i++) {
>>  >>  > + if (freq_table[i].rate >= default_sample_spec->rate && (capabilities->frequency & freq_table[i].cap)) {
>>  >>  > + config->frequency = freq_table[i].cap;
>>  >>  > + break;
>>  >>  > + }
>>  >>  > + }
>>  >>  > +
>>  >>  > + if ((unsigned) i == PA_ELEMENTSOF(freq_table)) {
>>  >>  > + for (--i; i >= 0; i--) {
>>  >>  > + if (capabilities->frequency & freq_table[i].cap) {
>>  >>  > + config->frequency = freq_table[i].cap;
>>  >>  > + break;
>>  >>  > + }
>>  >>  > + }
>>  >>  > +
>>  >>  > + if (i < 0) {
>>  >>  > + pa_log_error("Not suitable sample rate");
>>  >>  > + return false;
>>  >>  > + }
>>  >>  > + }
>>  >>  > +
>>  >>  > + return true;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static uint8_t fill_preferred_configuration(const pa_sample_spec *default_sample_spec, const uint8_t *capabilities_buffer, uint8_t capabilities_size, uint8_t config_buffer[MAX_A2DP_CAPS_SIZE]) {
>>  >>  > + a2dp_aptx_t *config = (a2dp_aptx_t *) config_buffer;
>>  >>  > + const a2dp_aptx_t *capabilities = (const a2dp_aptx_t *) capabilities_buffer;
>>  >>  > +
>>  >>  > + if (capabilities_size != sizeof(*capabilities)) {
>>  >>  > + pa_log_error("Invalid size of capabilities buffer");
>>  >>  > + return 0;
>>  >>  > + }
>>  >>  > +
>>  >>  > + pa_zero(*config);
>>  >>  > +
>>  >>  > + if (!fill_preferred_configuration_common(default_sample_spec, capabilities, config, APTX_VENDOR_ID, APTX_CODEC_ID))
>>  >>  > + return 0;
>>  >>  > +
>>  >>  > + return sizeof(*config);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static uint8_t fill_preferred_configuration_hd(const pa_sample_spec *default_sample_spec, const uint8_t *capabilities_buffer, uint8_t capabilities_size, uint8_t config_buffer[MAX_A2DP_CAPS_SIZE]) {
>>  >>  > + a2dp_aptx_hd_t *config = (a2dp_aptx_hd_t *) config_buffer;
>>  >>  > + const a2dp_aptx_hd_t *capabilities = (const a2dp_aptx_hd_t *) capabilities_buffer;
>>  >>  > +
>>  >>  > + if (capabilities_size != sizeof(*capabilities)) {
>>  >>  > + pa_log_error("Invalid size of capabilities buffer");
>>  >>  > + return 0;
>>  >>  > + }
>>  >>  > +
>>  >>  > + pa_zero(*config);
>>  >>  > +
>>  >>  > + if (!fill_preferred_configuration_common(default_sample_spec, &capabilities->aptx, &config->aptx, APTX_HD_VENDOR_ID, APTX_HD_CODEC_ID))
>>  >>  > + return 0;
>>  >>  > +
>>  >>  > + return sizeof(*config);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static void *init_common(const a2dp_aptx_t *config, pa_sample_spec *sample_spec, int hd) {
>>  >>  > + struct aptx_context *aptx_c;
>>  >>  > +
>>  >>  > + aptx_c = aptx_init(hd);
>>  >>  > + if (!aptx_c) {
>>  >>  > + pa_log_error("libopenaptx initialization failed");
>>  >>  > + return NULL;
>>  >>  > + }
>>  >>  > +
>>  >>  > + sample_spec->format = PA_SAMPLE_S24LE;
>>  >>  > +
>>  >>  > + switch (config->frequency) {
>>  >>  > + case APTX_SAMPLING_FREQ_16000:
>>  >>  > + sample_spec->rate = 16000U;
>>  >>  > + break;
>>  >>  > + case APTX_SAMPLING_FREQ_32000:
>>  >>  > + sample_spec->rate = 32000U;
>>  >>  > + break;
>>  >>  > + case APTX_SAMPLING_FREQ_44100:
>>  >>  > + sample_spec->rate = 44100U;
>>  >>  > + break;
>>  >>  > + case APTX_SAMPLING_FREQ_48000:
>>  >>  > + sample_spec->rate = 48000U;
>>  >>  > + break;
>>  >>  > + default:
>>  >>  > + pa_assert_not_reached();
>>  >>  > + }
>>  >>  > +
>>  >>  > + switch (config->channel_mode) {
>>  >>  > + case APTX_CHANNEL_MODE_STEREO:
>>  >>  > + sample_spec->channels = 2;
>>  >>  > + break;
>>  >>  > + default:
>>  >>  > + pa_assert_not_reached();
>>  >>  > + }
>>  >>  > +
>>  >>  > + PA_ONCE_BEGIN {
>>  >>  > +#if OPENAPTX_MAJOR == 0 && OPENAPTX_MINOR == 0 && OPENAPTX_PATCH == 0
>>  >>  > + /* libopenaptx version 0.0.0 does not export version global variables */
>>  >>  > + const int aptx_major = OPENAPTX_MAJOR;
>>  >>  > + const int aptx_minor = OPENAPTX_MINOR;
>>  >>  > + const int aptx_patch = OPENAPTX_PATCH;
>>  >>  > +#endif
>>  >>  > + pa_log_debug("Using aptX codec implementation: libopenaptx %d.%d.%d from https://github.com/pali/libopenaptx";, aptx_major, aptx_minor, aptx_patch);
>>  >>  > + } PA_ONCE_END;
>>  >>  > +
>>  >>  > + return aptx_c;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static void *init(bool for_encoding, bool for_backchannel, const uint8_t *config_buffer, uint8_t config_size, pa_sample_spec *sample_spec) {
>>  >>  > + const a2dp_aptx_t *config = (const a2dp_aptx_t *) config_buffer;
>>  >>  > +
>>  >>  > + pa_assert(config_size == sizeof(*config));
>>  >>  > + pa_assert(!for_backchannel);
>>  >>  > +
>>  >>  > + return init_common(config, sample_spec, 0);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static void *init_hd(bool for_encoding, bool for_backchannel, const uint8_t *config_buffer, uint8_t config_size, pa_sample_spec *sample_spec) {
>>  >>  > + struct aptx_hd_info *aptx_hd_info;
>>  >>  > + const a2dp_aptx_hd_t *config = (const a2dp_aptx_hd_t *) config_buffer;
>>  >>  > +
>>  >>  > + pa_assert(config_size == sizeof(*config));
>>  >>  > + pa_assert(!for_backchannel);
>>  >>  > +
>>  >>  > + aptx_hd_info = pa_xnew0(struct aptx_hd_info, 1);
>>  >>  > +
>>  >>  > + aptx_hd_info->aptx_c = init_common(&config->aptx, sample_spec, 1);
>>  >>  > + if (!aptx_hd_info->aptx_c) {
>>  >>  > + pa_xfree(aptx_hd_info);
>>  >>  > + return NULL;
>>  >>  > + }
>>  >>  > +
>>  >>  > + return aptx_hd_info;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static void deinit(void *codec_info) {
>>  >>  > + struct aptx_context *aptx_c = (struct aptx_context *) codec_info;
>>  >>  > +
>>  >>  > + aptx_finish(aptx_c);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static void deinit_hd(void *codec_info) {
>>  >>  > + struct aptx_hd_info *aptx_hd_info = (struct aptx_hd_info *) codec_info;
>>  >>  > +
>>  >>  > + deinit(aptx_hd_info->aptx_c);
>>  >>  > + pa_xfree(aptx_hd_info);
>>  >>  > +}
>>  >>  > +
>>  >>  > +static int reset(void *codec_info) {
>>  >>  > + struct aptx_context *aptx_c = (struct aptx_context *) codec_info;
>>  >>  > +
>>  >>  > + aptx_reset(aptx_c);
>>  >>  > + return 0;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static int reset_hd(void *codec_info) {
>>  >>  > + struct aptx_hd_info *aptx_hd_info = (struct aptx_hd_info *) codec_info;
>>  >>  > +
>>  >>  > + reset(aptx_hd_info->aptx_c);
>>  >>  > + aptx_hd_info->seq_num = 0;
>>  >>  > + return 0;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static size_t get_block_size(void *codec_info, size_t link_mtu) {
>>  >>  > + /* aptX compression ratio is 6:1 and we need to process one aptX frame (4 bytes) at once */
>>  >>  > + size_t frame_count = (link_mtu / 4);
>>  >>  > +
>>  >>  > + return frame_count * 4 * 6;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static size_t get_block_size_hd(void *codec_info, size_t link_mtu) {
>>  >>  > + /* aptX HD compression ratio is 4:1 and we need to process one aptX HD frame (6 bytes) at once, plus aptX HD frames are encapsulated in RTP */
>>  >>  > + size_t rtp_size = sizeof(struct rtp_header);
>>  >>  > + size_t frame_count = (link_mtu - rtp_size) / 6;
>>  >>  > +
>>  >>  > + return frame_count * 6 * 4;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static size_t reduce_encoder_bitrate(void *codec_info, size_t write_link_mtu) {
>>  >>  > + return 0;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static size_t encode_buffer(void *codec_info, uint32_t timestamp, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) {
>>  >>  > + struct aptx_context *aptx_c = (struct aptx_context *) codec_info;
>>  >>  > + size_t written;
>>  >>  > +
>>  >>  > + *processed = aptx_encode(aptx_c, input_buffer, input_size, output_buffer, output_size, &written);
>>  >>  > + if (PA_UNLIKELY(*processed == 0 || *processed != input_size))
>>  >>  > + pa_log_error("aptX encoding error");
>>  >>  > +
>>  >>  > + return written;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static size_t encode_buffer_hd(void *codec_info, uint32_t timestamp, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) {
>>  >>  > + struct aptx_hd_info *aptx_hd_info = (struct aptx_hd_info *) codec_info;
>>  >>  > + struct rtp_header *header;
>>  >>  > + size_t written;
>>  >>  > +
>>  >>  > + if (PA_UNLIKELY(output_size < sizeof(*header))) {
>>  >>  > + *processed = 0;
>>  >>  > + return 0;
>>  >>  > + }
>>  >>  > +
>>  >>  > + written = encode_buffer(aptx_hd_info->aptx_c, timestamp, input_buffer, input_size, output_buffer + sizeof(*header), output_size - sizeof(*header), processed);
>>  >>  > +
>>  >>  > + if (PA_LIKELY(written > 0)) {
>>  >>  > + header = (struct rtp_header *) output_buffer;
>>  >>  > + pa_zero(*header);
>>  >>  > + header->v = 2;
>>  >>  > + header->pt = 96;
>>  >>  > + header->sequence_number = htons(aptx_hd_info->seq_num++);
>>  >>  > + header->timestamp = htonl(timestamp);
>>  >>  > + header->ssrc = htonl(1);
>>  >>  > + written += sizeof(*header);
>>  >>  > + }
>>  >>  > +
>>  >>  > + return written;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static size_t decode_buffer(void *codec_info, uint32_t *timestamp, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) {
>>  >>  > + struct aptx_context *aptx_c = (struct aptx_context *) codec_info;
>>  >>  > + size_t written;
>>  >>  > +
>>  >>  > + *processed = aptx_decode(aptx_c, input_buffer, input_size, output_buffer, output_size, &written);
>>  >>  > +
>>  >>  > + /* Due to aptX latency, aptx_decode starts filling output buffer after 90 input samples.
>>  >>  > + * If input buffer contains less than 90 samples, aptx_decode returns zero (=no output)
>>  >>  > + * but set *processed to non zero as input samples were processed. So do not check for
>>  >>  > + * return value of aptx_decode, zero is valid. Decoding error is indicating by fact that
>>  >>  > + * not all input samples were processed. */
>>  >>  > + if (PA_UNLIKELY(*processed != input_size))
>>  >>  > + pa_log_error("aptX decoding error");
>>  >>  > +
>>  >>  > + return written;
>>  >>  > +}
>>  >>  > +
>>  >>  > +static size_t decode_buffer_hd(void *codec_info, uint32_t *timestamp, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) {
>>  >>  > + struct aptx_hd_info *aptx_hd_info = (struct aptx_hd_info *) codec_info;
>>  >>  > + struct rtp_header *header;
>>  >>  > + size_t written;
>>  >>  > +
>>  >>  > + if (PA_UNLIKELY(input_size < sizeof(*header))) {
>>  >>  > + *processed = 0;
>>  >>  > + return 0;
>>  >>  > + }
>>  >>  > +
>>  >>  > + header = (struct rtp_header *) input_buffer;
>>  >>  > + written = decode_buffer(aptx_hd_info->aptx_c, timestamp, input_buffer + sizeof(*header), input_size - sizeof(*header), output_buffer, output_size, processed);
>>  >>  > + *timestamp = ntohl(header->timestamp);
>>  >>  > + *processed += sizeof(*header);
>>  >>  > + return written;
>>  >>  > +}
>>  >>  > +
>>  >>  > +const pa_a2dp_codec pa_a2dp_codec_aptx = {
>>  >>  > + .name = "aptx",
>>  >>  > + .description = "aptX",
>>  >>  > + .id = { A2DP_CODEC_VENDOR, APTX_VENDOR_ID, APTX_CODEC_ID },
>>  >>  > + .support_backchannel = false,
>>  >>  > + .can_accept_capabilities = can_accept_capabilities,
>>  >>  > + .choose_remote_endpoint = choose_remote_endpoint,
>>  >>  > + .fill_capabilities = fill_capabilities,
>>  >>  > + .is_configuration_valid = is_configuration_valid,
>>  >>  > + .fill_preferred_configuration = fill_preferred_configuration,
>>  >>  > + .init = init,
>>  >>  > + .deinit = deinit,
>>  >>  > + .reset = reset,
>>  >>  > + .get_read_block_size = get_block_size,
>>  >>  > + .get_write_block_size = get_block_size,
>>  >>  > + .reduce_encoder_bitrate = reduce_encoder_bitrate,
>>  >>  > + .encode_buffer = encode_buffer,
>>  >>  > + .decode_buffer = decode_buffer,
>>  >>  > +};
>>  >>  > +
>>  >>  > +const pa_a2dp_codec pa_a2dp_codec_aptx_hd = {
>>  >>  > + .name = "aptx_hd",
>>  >>  > + .description = "aptX HD",
>>  >>  > + .id = { A2DP_CODEC_VENDOR, APTX_HD_VENDOR_ID, APTX_HD_CODEC_ID },
>>  >>  > + .support_backchannel = false,
>>  >>  > + .can_accept_capabilities = can_accept_capabilities_hd,
>>  >>  > + .choose_remote_endpoint = choose_remote_endpoint_hd,
>>  >>  > + .fill_capabilities = fill_capabilities_hd,
>>  >>  > + .is_configuration_valid = is_configuration_valid_hd,
>>  >>  > + .fill_preferred_configuration = fill_preferred_configuration_hd,
>>  >>  > + .init = init_hd,
>>  >>  > + .deinit = deinit_hd,
>>  >>  > + .reset = reset_hd,
>>  >>  > + .get_read_block_size = get_block_size_hd,
>>  >>  > + .get_write_block_size = get_block_size_hd,
>>  >>  > + .reduce_encoder_bitrate = reduce_encoder_bitrate,
>>  >>  > + .encode_buffer = encode_buffer_hd,
>>  >>  > + .decode_buffer = decode_buffer_hd,
>>  >>  > +};
>>  >>  > diff --git a/src/modules/bluetooth/a2dp-codec-util.c b/src/modules/bluetooth/a2dp-codec-util.c
>>  >>  > index 94d01e7bd..363fcc387 100644
>>  >>  > --- a/src/modules/bluetooth/a2dp-codec-util.c
>>  >>  > +++ b/src/modules/bluetooth/a2dp-codec-util.c
>>  >>  > @@ -27,11 +27,19 @@
>>  >>  >  #include "a2dp-codec-util.h"
>>  >>  >
>>  >>  >  extern const pa_a2dp_codec pa_a2dp_codec_sbc;
>>  >>  > +#ifdef HAVE_OPENAPTX
>>  >>  > +extern const pa_a2dp_codec pa_a2dp_codec_aptx;
>>  >>  > +extern const pa_a2dp_codec pa_a2dp_codec_aptx_hd;
>>  >>  > +#endif
>>  >>  >
>>  >>  >  /* This is list of supported codecs. Their order is important.
>>  >>  >   * Codec with higher index has higher priority. */
>>  >>  >  const pa_a2dp_codec *pa_a2dp_codecs[] = {
>>  >>  >      &pa_a2dp_codec_sbc,
>>  >>  > +#ifdef HAVE_OPENAPTX
>>  >>  > + &pa_a2dp_codec_aptx,
>>  >>  > + &pa_a2dp_codec_aptx_hd,
>>  >>  > +#endif
>>  >>  >  };
>>  >>  >
>>  >>  >  unsigned int pa_bluetooth_a2dp_codec_count(void) {
>>  >>  > --
>>  >>  > 2.11.0
>>  >>  >
>>  >>  > _______________________________________________
>>  >>  > pulseaudio-discuss mailing list
>>  >>  > pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
>>  >>  > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
>>  >>  _______________________________________________
>>  >>  pulseaudio-discuss mailing list
>>  >>  pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
>>  >>  https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
>>  >
>>  > --
>>  > Pali Rohár
>>  > pali.rohar@xxxxxxxxx
>
> --
> Pali Rohár
> pali.rohar@xxxxxxxxx
_______________________________________________
pulseaudio-discuss mailing list
pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss




[Index of Archives]     [Linux Audio Users]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux