But that is something different. Look at commit message where is link to correct library for building. On Monday 07 October 2019 10:05:52 Hyperion wrote: > Sorry, I should have provided the link to the source GIT https://github.com/Arkq/openaptx > > JP > > > 07.10.2019, 09:51, "Pali Rohár" <pali.rohar@xxxxxxxxx>: > > On Monday 07 October 2019 09:47:21 Hyperion wrote: > >> Quotig OpenAPTX Github README : > >> "This project is for research purposes only. Without a proper license private and commercial usage might be a case of a patent infringement. If you are looking for a library, which can be installed and used legally (commercial, private and educational usage), go to the Qualcomm® aptX™ homepage and contact Qualcomm customer service." > > > > Sorry, but I have not found any such quotes in README file. > > > >> So APTX support MUST only be provided for researching purposes, and so it should remain an external patch, out of the main PA tree. > >> > >> All the best, > >> > >> The source code itself is licensed under the terms of the MIT license. However, compression algorithms are patented and licensed under the terms of a proprietary license. Hence, compilation and redistribution in a binary format is forbidden! > > > > Library is fully licensed under LGPLv2.1+, not under MIT. And there are > > no proprietary parts. Maybe you are referring to different library? > > > >> 06.10.2019, 19:59, "Pali Rohár" <pali.rohar@xxxxxxxxx>: > >> > This patch provides support for aptX and aptX HD codecs in bluetooth A2DP > >> > profile. It uses open source LGPLv2.1+ licensed libopenaptx library which > >> > can be found at https://github.com/pali/libopenaptx. > >> > > >> > aptX for s24 stereo samples provides fixed 6:1 compression ratio and > >> > bitrate 352.8 kbit/s, aptX HD provides fixed 4:1 compression ratio and > >> > bitrate 529.2 kbit/s. > >> > > >> > According to soundexpert research, aptX codec used in bluetooth A2DP is no > >> > better than SBC High Quality settings. And you cannot hear difference > >> > between aptX and SBC High Quality, aptX is just a copper-less overpriced > >> > audio cable. > >> > > >> > aptX HD is high-bitrate version of aptX. It has clearly noticeable increase > >> > in sound quality (not dramatic though taking into account the increase in > >> > bitrate). > >> > > >> > http://soundexpert.org/news/-/blogs/audio-quality-of-bluetooth-aptx > >> > --- > >> > configure.ac | 36 +++ > >> > src/Makefile.am | 6 + > >> > src/modules/bluetooth/a2dp-codec-aptx.c | 479 ++++++++++++++++++++++++++++++++ > >> > src/modules/bluetooth/a2dp-codec-util.c | 8 + > >> > 4 files changed, 529 insertions(+) > >> > create mode 100644 src/modules/bluetooth/a2dp-codec-aptx.c > >> > > >> > diff --git a/configure.ac b/configure.ac > >> > index 8278353d4..26c625a59 100644 > >> > --- a/configure.ac > >> > +++ b/configure.ac > >> > @@ -1118,6 +1118,40 @@ AC_SUBST(HAVE_BLUEZ_5_NATIVE_HEADSET) > >> > AM_CONDITIONAL([HAVE_BLUEZ_5_NATIVE_HEADSET], [test "x$HAVE_BLUEZ_5_NATIVE_HEADSET" = x1]) > >> > AS_IF([test "x$HAVE_BLUEZ_5_NATIVE_HEADSET" = "x1"], AC_DEFINE([HAVE_BLUEZ_5_NATIVE_HEADSET], 1, [Bluez 5 native headset backend enabled])) > >> > > >> > +#### Bluetooth A2DP aptX codec (optional) ### > >> > + > >> > +AC_ARG_ENABLE([aptx], > >> > + AS_HELP_STRING([--disable-aptx],[Disable optional bluetooth A2DP aptX and aptX HD codecs support (via libopenaptx)])) > >> > +AC_ARG_VAR([OPENAPTX_CPPFLAGS], [C preprocessor flags for openaptx]) > >> > +AC_ARG_VAR([OPENAPTX_LDFLAGS], [linker flags for openaptx]) > >> > + > >> > +CPPFLAGS_SAVE="$CPPFLAGS" > >> > +LDFLAGS_SAVE="$LDFLAGS" > >> > +LIBS_SAVE="$LIBS" > >> > + > >> > +CPPFLAGS="$CPPFLAGS $OPENAPTX_CPPFLAGS" > >> > +LDFLAGS="$LDFLAGS $OPENAPTX_LDFLAGS" > >> > + > >> > +AS_IF([test "x$HAVE_BLUEZ_5" = "x1" && test "x$enable_aptx" != "xno"], > >> > + [AC_CHECK_HEADER([openaptx.h], > >> > + [AC_SEARCH_LIBS([aptx_init], [openaptx], > >> > + [HAVE_OPENAPTX=1; AS_IF([test "x$ac_cv_search_aptx_init" != "xnone required"], [OPENAPTX_LDFLAGS="$OPENAPTX_LDFLAGS $ac_cv_search_aptx_init"])], > >> > + [HAVE_OPENAPTX=0])], > >> > + [HAVE_OPENAPTX=0])]) > >> > + > >> > +CPPFLAGS="$CPPFLAGS_SAVE" > >> > +LDFLAGS="$LDFLAGS_SAVE" > >> > +LIBS="$LIBS_SAVE" > >> > + > >> > +AS_IF([test "x$HAVE_BLUEZ_5" = "x1" && test "x$enable_aptx" = "xyes" && test "x$HAVE_OPENAPTX" = "x0"], > >> > + [AC_MSG_ERROR([*** libopenaptx from https://github.com/pali/libopenaptx not found])]) > >> > + > >> > +AC_SUBST(OPENAPTX_CPPFLAGS) > >> > +AC_SUBST(OPENAPTX_LDFLAGS) > >> > +AC_SUBST(HAVE_OPENAPTX) > >> > +AM_CONDITIONAL([HAVE_OPENAPTX], [test "x$HAVE_OPENAPTX" = "x1"]) > >> > +AS_IF([test "x$HAVE_OPENAPTX" = "x1"], AC_DEFINE([HAVE_OPENAPTX], 1, [Have openaptx codec library])) > >> > + > >> > #### UDEV support (optional) #### > >> > > >> > AC_ARG_ENABLE([udev], > >> > @@ -1603,6 +1637,7 @@ AS_IF([test "x$HAVE_SYSTEMD_JOURNAL" = "x1"], ENABLE_SYSTEMD_JOURNAL=yes, ENABLE > >> > AS_IF([test "x$HAVE_BLUEZ_5" = "x1"], ENABLE_BLUEZ_5=yes, ENABLE_BLUEZ_5=no) > >> > AS_IF([test "x$HAVE_BLUEZ_5_OFONO_HEADSET" = "x1"], ENABLE_BLUEZ_5_OFONO_HEADSET=yes, ENABLE_BLUEZ_5_OFONO_HEADSET=no) > >> > AS_IF([test "x$HAVE_BLUEZ_5_NATIVE_HEADSET" = "x1"], ENABLE_BLUEZ_5_NATIVE_HEADSET=yes, ENABLE_BLUEZ_5_NATIVE_HEADSET=no) > >> > +AS_IF([test "x$HAVE_OPENAPTX" = "x1"], ENABLE_APTX=yes, ENABLE_APTX=no) > >> > AS_IF([test "x$HAVE_HAL_COMPAT" = "x1"], ENABLE_HAL_COMPAT=yes, ENABLE_HAL_COMPAT=no) > >> > AS_IF([test "x$HAVE_TCPWRAP" = "x1"], ENABLE_TCPWRAP=yes, ENABLE_TCPWRAP=no) > >> > AS_IF([test "x$HAVE_LIBSAMPLERATE" = "x1"], ENABLE_LIBSAMPLERATE="yes (DEPRECATED)", ENABLE_LIBSAMPLERATE=no) > >> > @@ -1661,6 +1696,7 @@ echo " > >> > Enable BlueZ 5: ${ENABLE_BLUEZ_5} > >> > Enable ofono headsets: ${ENABLE_BLUEZ_5_OFONO_HEADSET} > >> > Enable native headsets: ${ENABLE_BLUEZ_5_NATIVE_HEADSET} > >> > + Enable aptX+aptXHD codecs: ${ENABLE_APTX} > >> > Enable udev: ${ENABLE_UDEV} > >> > Enable HAL->udev compat: ${ENABLE_HAL_COMPAT} > >> > Enable systemd > >> > diff --git a/src/Makefile.am b/src/Makefile.am > >> > index b84c778cc..e317b7972 100644 > >> > --- a/src/Makefile.am > >> > +++ b/src/Makefile.am > >> > @@ -2164,6 +2164,12 @@ libbluez5_util_la_SOURCES += modules/bluetooth/a2dp-codec-sbc.c > >> > libbluez5_util_la_LIBADD += $(SBC_LIBS) > >> > libbluez5_util_la_CFLAGS += $(SBC_CFLAGS) > >> > > >> > +if HAVE_OPENAPTX > >> > +libbluez5_util_la_SOURCES += modules/bluetooth/a2dp-codec-aptx.c > >> > +libbluez5_util_la_CPPFLAGS += $(OPENAPTX_CPPFLAGS) > >> > +libbluez5_util_la_LDFLAGS += $(OPENAPTX_LDFLAGS) > >> > +endif > >> > + > >> > module_bluez5_discover_la_SOURCES = modules/bluetooth/module-bluez5-discover.c > >> > module_bluez5_discover_la_LDFLAGS = $(MODULE_LDFLAGS) > >> > module_bluez5_discover_la_LIBADD = $(MODULE_LIBADD) $(DBUS_LIBS) libbluez5-util.la > >> > diff --git a/src/modules/bluetooth/a2dp-codec-aptx.c b/src/modules/bluetooth/a2dp-codec-aptx.c > >> > new file mode 100644 > >> > index 000000000..2bd9e7652 > >> > --- /dev/null > >> > +++ b/src/modules/bluetooth/a2dp-codec-aptx.c > >> > @@ -0,0 +1,479 @@ > >> > +/*** > >> > + This file is part of PulseAudio. > >> > + > >> > + Copyright 2018-2019 Pali Rohár <pali.rohar@xxxxxxxxx> > >> > + > >> > + PulseAudio is free software; you can redistribute it and/or modify > >> > + it under the terms of the GNU Lesser General Public License as > >> > + published by the Free Software Foundation; either version 2.1 of the > >> > + License, or (at your option) any later version. > >> > + > >> > + PulseAudio is distributed in the hope that it will be useful, but > >> > + WITHOUT ANY WARRANTY; without even the implied warranty of > >> > + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > >> > + General Public License for more details. > >> > + > >> > + You should have received a copy of the GNU Lesser General Public > >> > + License along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. > >> > +***/ > >> > + > >> > +#ifdef HAVE_CONFIG_H > >> > +#include <config.h> > >> > +#endif > >> > + > >> > +#include <pulsecore/log.h> > >> > +#include <pulsecore/macro.h> > >> > +#include <pulsecore/once.h> > >> > +#include <pulse/sample.h> > >> > + > >> > +#include <arpa/inet.h> > >> > + > >> > +#include <openaptx.h> > >> > + > >> > +#include "a2dp-codecs.h" > >> > +#include "a2dp-codec-api.h" > >> > +#include "rtp.h" > >> > + > >> > +struct aptx_hd_info { > >> > + struct aptx_context *aptx_c; > >> > + uint16_t seq_num; > >> > +}; > >> > + > >> > +static bool can_accept_capabilities_common(const a2dp_aptx_t *capabilities, uint32_t vendor_id, uint16_t codec_id) { > >> > + if (A2DP_GET_VENDOR_ID(capabilities->info) != vendor_id || A2DP_GET_CODEC_ID(capabilities->info) != codec_id) > >> > + return false; > >> > + > >> > + if (!(capabilities->frequency & (APTX_SAMPLING_FREQ_16000 | APTX_SAMPLING_FREQ_32000 | > >> > + APTX_SAMPLING_FREQ_44100 | APTX_SAMPLING_FREQ_48000))) > >> > + return false; > >> > + > >> > + if (!(capabilities->channel_mode & APTX_CHANNEL_MODE_STEREO)) > >> > + return false; > >> > + > >> > + return true; > >> > +} > >> > + > >> > +static bool can_accept_capabilities(const uint8_t *capabilities_buffer, uint8_t capabilities_size, bool for_encoding) { > >> > + const a2dp_aptx_t *capabilities = (const a2dp_aptx_t *) capabilities_buffer; > >> > + > >> > + if (capabilities_size != sizeof(*capabilities)) > >> > + return false; > >> > + > >> > + return can_accept_capabilities_common(capabilities, APTX_VENDOR_ID, APTX_CODEC_ID); > >> > +} > >> > + > >> > +static bool can_accept_capabilities_hd(const uint8_t *capabilities_buffer, uint8_t capabilities_size, bool for_encoding) { > >> > + const a2dp_aptx_hd_t *capabilities = (const a2dp_aptx_hd_t *) capabilities_buffer; > >> > + > >> > + if (capabilities_size != sizeof(*capabilities)) > >> > + return false; > >> > + > >> > + return can_accept_capabilities_common(&capabilities->aptx, APTX_HD_VENDOR_ID, APTX_HD_CODEC_ID); > >> > +} > >> > + > >> > +static const char *choose_remote_endpoint_common(bool (*can_accept_capabilities_func)(const uint8_t *, uint8_t, bool), const pa_hashmap *capabilities_hashmap, bool for_encoding) { > >> > + const pa_a2dp_codec_capabilities *a2dp_capabilities; > >> > + const char *key; > >> > + void *state; > >> > + > >> > + /* There is no preference, just choose random valid entry */ > >> > + PA_HASHMAP_FOREACH_KV(key, a2dp_capabilities, capabilities_hashmap, state) { > >> > + if (can_accept_capabilities_func(a2dp_capabilities->buffer, a2dp_capabilities->size, for_encoding)) > >> > + return key; > >> > + } > >> > + > >> > + return NULL; > >> > +} > >> > + > >> > +static const char *choose_remote_endpoint(const pa_hashmap *capabilities_hashmap, const pa_sample_spec *default_sample_spec, bool for_encoding) { > >> > + return choose_remote_endpoint_common(can_accept_capabilities, capabilities_hashmap, for_encoding); > >> > +} > >> > + > >> > +static const char *choose_remote_endpoint_hd(const pa_hashmap *capabilities_hashmap, const pa_sample_spec *default_sample_spec, bool for_encoding) { > >> > + return choose_remote_endpoint_common(can_accept_capabilities_hd, capabilities_hashmap, for_encoding); > >> > +} > >> > + > >> > +static void fill_capabilities_common(a2dp_aptx_t *capabilities, uint32_t vendor_id, uint16_t codec_id) { > >> > + capabilities->info = A2DP_SET_VENDOR_ID_CODEC_ID(vendor_id, codec_id); > >> > + capabilities->channel_mode = APTX_CHANNEL_MODE_STEREO; > >> > + capabilities->frequency = APTX_SAMPLING_FREQ_16000 | APTX_SAMPLING_FREQ_32000 | > >> > + APTX_SAMPLING_FREQ_44100 | APTX_SAMPLING_FREQ_48000; > >> > +} > >> > + > >> > +static uint8_t fill_capabilities(uint8_t capabilities_buffer[MAX_A2DP_CAPS_SIZE]) { > >> > + a2dp_aptx_t *capabilities = (a2dp_aptx_t *) capabilities_buffer; > >> > + > >> > + pa_zero(*capabilities); > >> > + fill_capabilities_common(capabilities, APTX_VENDOR_ID, APTX_CODEC_ID); > >> > + return sizeof(*capabilities); > >> > +} > >> > + > >> > +static uint8_t fill_capabilities_hd(uint8_t capabilities_buffer[MAX_A2DP_CAPS_SIZE]) { > >> > + a2dp_aptx_hd_t *capabilities = (a2dp_aptx_hd_t *) capabilities_buffer; > >> > + > >> > + pa_zero(*capabilities); > >> > + fill_capabilities_common(&capabilities->aptx, APTX_HD_VENDOR_ID, APTX_HD_CODEC_ID); > >> > + return sizeof(*capabilities); > >> > +} > >> > + > >> > +static bool is_configuration_valid_common(const a2dp_aptx_t *config, uint32_t vendor_id, uint16_t codec_id) { > >> > + if (A2DP_GET_VENDOR_ID(config->info) != vendor_id || A2DP_GET_CODEC_ID(config->info) != codec_id) { > >> > + pa_log_error("Invalid vendor codec information in configuration"); > >> > + return false; > >> > + } > >> > + > >> > + if (config->frequency != APTX_SAMPLING_FREQ_16000 && config->frequency != APTX_SAMPLING_FREQ_32000 && > >> > + config->frequency != APTX_SAMPLING_FREQ_44100 && config->frequency != APTX_SAMPLING_FREQ_48000) { > >> > + pa_log_error("Invalid sampling frequency in configuration"); > >> > + return false; > >> > + } > >> > + > >> > + if (config->channel_mode != APTX_CHANNEL_MODE_STEREO) { > >> > + pa_log_error("Invalid channel mode in configuration"); > >> > + return false; > >> > + } > >> > + > >> > + return true; > >> > +} > >> > + > >> > +static bool is_configuration_valid(const uint8_t *config_buffer, uint8_t config_size) { > >> > + const a2dp_aptx_t *config = (const a2dp_aptx_t *) config_buffer; > >> > + > >> > + if (config_size != sizeof(*config)) { > >> > + pa_log_error("Invalid size of config buffer"); > >> > + return false; > >> > + } > >> > + > >> > + return is_configuration_valid_common(config, APTX_VENDOR_ID, APTX_CODEC_ID); > >> > +} > >> > + > >> > +static bool is_configuration_valid_hd(const uint8_t *config_buffer, uint8_t config_size) { > >> > + const a2dp_aptx_hd_t *config = (const a2dp_aptx_hd_t *) config_buffer; > >> > + > >> > + if (config_size != sizeof(*config)) { > >> > + pa_log_error("Invalid size of config buffer"); > >> > + return false; > >> > + } > >> > + > >> > + return is_configuration_valid_common(&config->aptx, APTX_HD_VENDOR_ID, APTX_HD_CODEC_ID); > >> > +} > >> > + > >> > +static bool fill_preferred_configuration_common(const pa_sample_spec *default_sample_spec, const a2dp_aptx_t *capabilities, a2dp_aptx_t *config, uint32_t vendor_id, uint16_t codec_id) { > >> > + int i; > >> > + > >> > + static const struct { > >> > + uint32_t rate; > >> > + uint8_t cap; > >> > + } freq_table[] = { > >> > + { 16000U, APTX_SAMPLING_FREQ_16000 }, > >> > + { 32000U, APTX_SAMPLING_FREQ_32000 }, > >> > + { 44100U, APTX_SAMPLING_FREQ_44100 }, > >> > + { 48000U, APTX_SAMPLING_FREQ_48000 } > >> > + }; > >> > + > >> > + if (A2DP_GET_VENDOR_ID(capabilities->info) != vendor_id || A2DP_GET_CODEC_ID(capabilities->info) != codec_id) { > >> > + pa_log_error("No supported vendor codec information"); > >> > + return false; > >> > + } > >> > + > >> > + config->info = A2DP_SET_VENDOR_ID_CODEC_ID(vendor_id, codec_id); > >> > + > >> > + if (!(capabilities->channel_mode & APTX_CHANNEL_MODE_STEREO)) { > >> > + pa_log_error("No supported channel modes"); > >> > + return false; > >> > + } > >> > + > >> > + config->channel_mode = APTX_CHANNEL_MODE_STEREO; > >> > + > >> > + /* Find the lowest freq that is at least as high as the requested sampling rate */ > >> > + for (i = 0; (unsigned) i < PA_ELEMENTSOF(freq_table); i++) { > >> > + if (freq_table[i].rate >= default_sample_spec->rate && (capabilities->frequency & freq_table[i].cap)) { > >> > + config->frequency = freq_table[i].cap; > >> > + break; > >> > + } > >> > + } > >> > + > >> > + if ((unsigned) i == PA_ELEMENTSOF(freq_table)) { > >> > + for (--i; i >= 0; i--) { > >> > + if (capabilities->frequency & freq_table[i].cap) { > >> > + config->frequency = freq_table[i].cap; > >> > + break; > >> > + } > >> > + } > >> > + > >> > + if (i < 0) { > >> > + pa_log_error("Not suitable sample rate"); > >> > + return false; > >> > + } > >> > + } > >> > + > >> > + return true; > >> > +} > >> > + > >> > +static uint8_t fill_preferred_configuration(const pa_sample_spec *default_sample_spec, const uint8_t *capabilities_buffer, uint8_t capabilities_size, uint8_t config_buffer[MAX_A2DP_CAPS_SIZE]) { > >> > + a2dp_aptx_t *config = (a2dp_aptx_t *) config_buffer; > >> > + const a2dp_aptx_t *capabilities = (const a2dp_aptx_t *) capabilities_buffer; > >> > + > >> > + if (capabilities_size != sizeof(*capabilities)) { > >> > + pa_log_error("Invalid size of capabilities buffer"); > >> > + return 0; > >> > + } > >> > + > >> > + pa_zero(*config); > >> > + > >> > + if (!fill_preferred_configuration_common(default_sample_spec, capabilities, config, APTX_VENDOR_ID, APTX_CODEC_ID)) > >> > + return 0; > >> > + > >> > + return sizeof(*config); > >> > +} > >> > + > >> > +static uint8_t fill_preferred_configuration_hd(const pa_sample_spec *default_sample_spec, const uint8_t *capabilities_buffer, uint8_t capabilities_size, uint8_t config_buffer[MAX_A2DP_CAPS_SIZE]) { > >> > + a2dp_aptx_hd_t *config = (a2dp_aptx_hd_t *) config_buffer; > >> > + const a2dp_aptx_hd_t *capabilities = (const a2dp_aptx_hd_t *) capabilities_buffer; > >> > + > >> > + if (capabilities_size != sizeof(*capabilities)) { > >> > + pa_log_error("Invalid size of capabilities buffer"); > >> > + return 0; > >> > + } > >> > + > >> > + pa_zero(*config); > >> > + > >> > + if (!fill_preferred_configuration_common(default_sample_spec, &capabilities->aptx, &config->aptx, APTX_HD_VENDOR_ID, APTX_HD_CODEC_ID)) > >> > + return 0; > >> > + > >> > + return sizeof(*config); > >> > +} > >> > + > >> > +static void *init_common(const a2dp_aptx_t *config, pa_sample_spec *sample_spec, int hd) { > >> > + struct aptx_context *aptx_c; > >> > + > >> > + aptx_c = aptx_init(hd); > >> > + if (!aptx_c) { > >> > + pa_log_error("libopenaptx initialization failed"); > >> > + return NULL; > >> > + } > >> > + > >> > + sample_spec->format = PA_SAMPLE_S24LE; > >> > + > >> > + switch (config->frequency) { > >> > + case APTX_SAMPLING_FREQ_16000: > >> > + sample_spec->rate = 16000U; > >> > + break; > >> > + case APTX_SAMPLING_FREQ_32000: > >> > + sample_spec->rate = 32000U; > >> > + break; > >> > + case APTX_SAMPLING_FREQ_44100: > >> > + sample_spec->rate = 44100U; > >> > + break; > >> > + case APTX_SAMPLING_FREQ_48000: > >> > + sample_spec->rate = 48000U; > >> > + break; > >> > + default: > >> > + pa_assert_not_reached(); > >> > + } > >> > + > >> > + switch (config->channel_mode) { > >> > + case APTX_CHANNEL_MODE_STEREO: > >> > + sample_spec->channels = 2; > >> > + break; > >> > + default: > >> > + pa_assert_not_reached(); > >> > + } > >> > + > >> > + PA_ONCE_BEGIN { > >> > +#if OPENAPTX_MAJOR == 0 && OPENAPTX_MINOR == 0 && OPENAPTX_PATCH == 0 > >> > + /* libopenaptx version 0.0.0 does not export version global variables */ > >> > + const int aptx_major = OPENAPTX_MAJOR; > >> > + const int aptx_minor = OPENAPTX_MINOR; > >> > + const int aptx_patch = OPENAPTX_PATCH; > >> > +#endif > >> > + pa_log_debug("Using aptX codec implementation: libopenaptx %d.%d.%d from https://github.com/pali/libopenaptx";, aptx_major, aptx_minor, aptx_patch); > >> > + } PA_ONCE_END; > >> > + > >> > + return aptx_c; > >> > +} > >> > + > >> > +static void *init(bool for_encoding, bool for_backchannel, const uint8_t *config_buffer, uint8_t config_size, pa_sample_spec *sample_spec) { > >> > + const a2dp_aptx_t *config = (const a2dp_aptx_t *) config_buffer; > >> > + > >> > + pa_assert(config_size == sizeof(*config)); > >> > + pa_assert(!for_backchannel); > >> > + > >> > + return init_common(config, sample_spec, 0); > >> > +} > >> > + > >> > +static void *init_hd(bool for_encoding, bool for_backchannel, const uint8_t *config_buffer, uint8_t config_size, pa_sample_spec *sample_spec) { > >> > + struct aptx_hd_info *aptx_hd_info; > >> > + const a2dp_aptx_hd_t *config = (const a2dp_aptx_hd_t *) config_buffer; > >> > + > >> > + pa_assert(config_size == sizeof(*config)); > >> > + pa_assert(!for_backchannel); > >> > + > >> > + aptx_hd_info = pa_xnew0(struct aptx_hd_info, 1); > >> > + > >> > + aptx_hd_info->aptx_c = init_common(&config->aptx, sample_spec, 1); > >> > + if (!aptx_hd_info->aptx_c) { > >> > + pa_xfree(aptx_hd_info); > >> > + return NULL; > >> > + } > >> > + > >> > + return aptx_hd_info; > >> > +} > >> > + > >> > +static void deinit(void *codec_info) { > >> > + struct aptx_context *aptx_c = (struct aptx_context *) codec_info; > >> > + > >> > + aptx_finish(aptx_c); > >> > +} > >> > + > >> > +static void deinit_hd(void *codec_info) { > >> > + struct aptx_hd_info *aptx_hd_info = (struct aptx_hd_info *) codec_info; > >> > + > >> > + deinit(aptx_hd_info->aptx_c); > >> > + pa_xfree(aptx_hd_info); > >> > +} > >> > + > >> > +static int reset(void *codec_info) { > >> > + struct aptx_context *aptx_c = (struct aptx_context *) codec_info; > >> > + > >> > + aptx_reset(aptx_c); > >> > + return 0; > >> > +} > >> > + > >> > +static int reset_hd(void *codec_info) { > >> > + struct aptx_hd_info *aptx_hd_info = (struct aptx_hd_info *) codec_info; > >> > + > >> > + reset(aptx_hd_info->aptx_c); > >> > + aptx_hd_info->seq_num = 0; > >> > + return 0; > >> > +} > >> > + > >> > +static size_t get_block_size(void *codec_info, size_t link_mtu) { > >> > + /* aptX compression ratio is 6:1 and we need to process one aptX frame (4 bytes) at once */ > >> > + size_t frame_count = (link_mtu / 4); > >> > + > >> > + return frame_count * 4 * 6; > >> > +} > >> > + > >> > +static size_t get_block_size_hd(void *codec_info, size_t link_mtu) { > >> > + /* aptX HD compression ratio is 4:1 and we need to process one aptX HD frame (6 bytes) at once, plus aptX HD frames are encapsulated in RTP */ > >> > + size_t rtp_size = sizeof(struct rtp_header); > >> > + size_t frame_count = (link_mtu - rtp_size) / 6; > >> > + > >> > + return frame_count * 6 * 4; > >> > +} > >> > + > >> > +static size_t reduce_encoder_bitrate(void *codec_info, size_t write_link_mtu) { > >> > + return 0; > >> > +} > >> > + > >> > +static size_t encode_buffer(void *codec_info, uint32_t timestamp, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) { > >> > + struct aptx_context *aptx_c = (struct aptx_context *) codec_info; > >> > + size_t written; > >> > + > >> > + *processed = aptx_encode(aptx_c, input_buffer, input_size, output_buffer, output_size, &written); > >> > + if (PA_UNLIKELY(*processed == 0 || *processed != input_size)) > >> > + pa_log_error("aptX encoding error"); > >> > + > >> > + return written; > >> > +} > >> > + > >> > +static size_t encode_buffer_hd(void *codec_info, uint32_t timestamp, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) { > >> > + struct aptx_hd_info *aptx_hd_info = (struct aptx_hd_info *) codec_info; > >> > + struct rtp_header *header; > >> > + size_t written; > >> > + > >> > + if (PA_UNLIKELY(output_size < sizeof(*header))) { > >> > + *processed = 0; > >> > + return 0; > >> > + } > >> > + > >> > + written = encode_buffer(aptx_hd_info->aptx_c, timestamp, input_buffer, input_size, output_buffer + sizeof(*header), output_size - sizeof(*header), processed); > >> > + > >> > + if (PA_LIKELY(written > 0)) { > >> > + header = (struct rtp_header *) output_buffer; > >> > + pa_zero(*header); > >> > + header->v = 2; > >> > + header->pt = 96; > >> > + header->sequence_number = htons(aptx_hd_info->seq_num++); > >> > + header->timestamp = htonl(timestamp); > >> > + header->ssrc = htonl(1); > >> > + written += sizeof(*header); > >> > + } > >> > + > >> > + return written; > >> > +} > >> > + > >> > +static size_t decode_buffer(void *codec_info, uint32_t *timestamp, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) { > >> > + struct aptx_context *aptx_c = (struct aptx_context *) codec_info; > >> > + size_t written; > >> > + > >> > + *processed = aptx_decode(aptx_c, input_buffer, input_size, output_buffer, output_size, &written); > >> > + > >> > + /* Due to aptX latency, aptx_decode starts filling output buffer after 90 input samples. > >> > + * If input buffer contains less than 90 samples, aptx_decode returns zero (=no output) > >> > + * but set *processed to non zero as input samples were processed. So do not check for > >> > + * return value of aptx_decode, zero is valid. Decoding error is indicating by fact that > >> > + * not all input samples were processed. */ > >> > + if (PA_UNLIKELY(*processed != input_size)) > >> > + pa_log_error("aptX decoding error"); > >> > + > >> > + return written; > >> > +} > >> > + > >> > +static size_t decode_buffer_hd(void *codec_info, uint32_t *timestamp, const uint8_t *input_buffer, size_t input_size, uint8_t *output_buffer, size_t output_size, size_t *processed) { > >> > + struct aptx_hd_info *aptx_hd_info = (struct aptx_hd_info *) codec_info; > >> > + struct rtp_header *header; > >> > + size_t written; > >> > + > >> > + if (PA_UNLIKELY(input_size < sizeof(*header))) { > >> > + *processed = 0; > >> > + return 0; > >> > + } > >> > + > >> > + header = (struct rtp_header *) input_buffer; > >> > + written = decode_buffer(aptx_hd_info->aptx_c, timestamp, input_buffer + sizeof(*header), input_size - sizeof(*header), output_buffer, output_size, processed); > >> > + *timestamp = ntohl(header->timestamp); > >> > + *processed += sizeof(*header); > >> > + return written; > >> > +} > >> > + > >> > +const pa_a2dp_codec pa_a2dp_codec_aptx = { > >> > + .name = "aptx", > >> > + .description = "aptX", > >> > + .id = { A2DP_CODEC_VENDOR, APTX_VENDOR_ID, APTX_CODEC_ID }, > >> > + .support_backchannel = false, > >> > + .can_accept_capabilities = can_accept_capabilities, > >> > + .choose_remote_endpoint = choose_remote_endpoint, > >> > + .fill_capabilities = fill_capabilities, > >> > + .is_configuration_valid = is_configuration_valid, > >> > + .fill_preferred_configuration = fill_preferred_configuration, > >> > + .init = init, > >> > + .deinit = deinit, > >> > + .reset = reset, > >> > + .get_read_block_size = get_block_size, > >> > + .get_write_block_size = get_block_size, > >> > + .reduce_encoder_bitrate = reduce_encoder_bitrate, > >> > + .encode_buffer = encode_buffer, > >> > + .decode_buffer = decode_buffer, > >> > +}; > >> > + > >> > +const pa_a2dp_codec pa_a2dp_codec_aptx_hd = { > >> > + .name = "aptx_hd", > >> > + .description = "aptX HD", > >> > + .id = { A2DP_CODEC_VENDOR, APTX_HD_VENDOR_ID, APTX_HD_CODEC_ID }, > >> > + .support_backchannel = false, > >> > + .can_accept_capabilities = can_accept_capabilities_hd, > >> > + .choose_remote_endpoint = choose_remote_endpoint_hd, > >> > + .fill_capabilities = fill_capabilities_hd, > >> > + .is_configuration_valid = is_configuration_valid_hd, > >> > + .fill_preferred_configuration = fill_preferred_configuration_hd, > >> > + .init = init_hd, > >> > + .deinit = deinit_hd, > >> > + .reset = reset_hd, > >> > + .get_read_block_size = get_block_size_hd, > >> > + .get_write_block_size = get_block_size_hd, > >> > + .reduce_encoder_bitrate = reduce_encoder_bitrate, > >> > + .encode_buffer = encode_buffer_hd, > >> > + .decode_buffer = decode_buffer_hd, > >> > +}; > >> > diff --git a/src/modules/bluetooth/a2dp-codec-util.c b/src/modules/bluetooth/a2dp-codec-util.c > >> > index 94d01e7bd..363fcc387 100644 > >> > --- a/src/modules/bluetooth/a2dp-codec-util.c > >> > +++ b/src/modules/bluetooth/a2dp-codec-util.c > >> > @@ -27,11 +27,19 @@ > >> > #include "a2dp-codec-util.h" > >> > > >> > extern const pa_a2dp_codec pa_a2dp_codec_sbc; > >> > +#ifdef HAVE_OPENAPTX > >> > +extern const pa_a2dp_codec pa_a2dp_codec_aptx; > >> > +extern const pa_a2dp_codec pa_a2dp_codec_aptx_hd; > >> > +#endif > >> > > >> > /* This is list of supported codecs. Their order is important. > >> > * Codec with higher index has higher priority. */ > >> > const pa_a2dp_codec *pa_a2dp_codecs[] = { > >> > &pa_a2dp_codec_sbc, > >> > +#ifdef HAVE_OPENAPTX > >> > + &pa_a2dp_codec_aptx, > >> > + &pa_a2dp_codec_aptx_hd, > >> > +#endif > >> > }; > >> > > >> > unsigned int pa_bluetooth_a2dp_codec_count(void) { > >> > -- > >> > 2.11.0 > >> > > >> > _______________________________________________ > >> > pulseaudio-discuss mailing list > >> > pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx > >> > https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss > >> _______________________________________________ > >> pulseaudio-discuss mailing list > >> pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx > >> https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss > > > > -- > > Pali Rohár > > pali.rohar@xxxxxxxxx -- Pali Rohár pali.rohar@xxxxxxxxx _______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
